xref: /freebsd/sys/contrib/device-tree/src/arm64/freescale/fsl-ls208xa-rdb.dtsi (revision b077aed33b7b6aefca7b17ddb250cf521f938613) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree file for Freescale LS2080A RDB Board.
4 *
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * Copyright 2017-2020 NXP
7 *
8 * Abhimanyu Saini <abhimanyu.saini@nxp.com>
9 *
10 */
11
12&esdhc {
13	status = "okay";
14};
15
16&ifc {
17	status = "okay";
18	#address-cells = <2>;
19	#size-cells = <1>;
20	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
21		  0x2 0x0 0x5 0x30000000 0x00010000
22		  0x3 0x0 0x5 0x20000000 0x00010000>;
23
24	nor@0,0 {
25		#address-cells = <1>;
26		#size-cells = <1>;
27		compatible = "cfi-flash";
28		reg = <0x0 0x0 0x8000000>;
29		bank-width = <2>;
30		device-width = <1>;
31	};
32
33	nand@2,0 {
34	     compatible = "fsl,ifc-nand";
35	     reg = <0x2 0x0 0x10000>;
36	};
37
38	cpld@3,0 {
39	     reg = <0x3 0x0 0x10000>;
40	     compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
41	};
42
43};
44
45&i2c0 {
46	status = "okay";
47	pca9547@75 {
48		compatible = "nxp,pca9547";
49		reg = <0x75>;
50		#address-cells = <1>;
51		#size-cells = <0>;
52		i2c@1 {
53			#address-cells = <1>;
54			#size-cells = <0>;
55			reg = <0x01>;
56			rtc@68 {
57				compatible = "dallas,ds3232";
58				reg = <0x68>;
59				/* IRQ_RTC_B -> IRQ06, active low */
60				interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
61			};
62		};
63
64		i2c@2 {
65			#address-cells = <1>;
66			#size-cells = <0>;
67			reg = <0x02>;
68
69			ina220@40 {
70				compatible = "ti,ina220";
71				reg = <0x40>;
72				shunt-resistor = <500>;
73			};
74		};
75
76		i2c@3 {
77			#address-cells = <1>;
78			#size-cells = <0>;
79			reg = <0x3>;
80
81			adt7481@4c {
82				compatible = "adi,adt7461";
83				reg = <0x4c>;
84			};
85		};
86	};
87};
88
89&i2c1 {
90	status = "disabled";
91};
92
93&i2c2 {
94	status = "disabled";
95};
96
97&i2c3 {
98	status = "disabled";
99};
100
101&dspi {
102	status = "okay";
103	dflash0: flash@0 {
104		#address-cells = <1>;
105		#size-cells = <1>;
106		compatible = "st,m25p80";
107		spi-max-frequency = <3000000>;
108		reg = <0>;
109	};
110};
111
112&qspi {
113	status = "okay";
114
115	s25fs512s0: flash@0 {
116		#address-cells = <1>;
117		#size-cells = <1>;
118		compatible = "jedec,spi-nor";
119		spi-max-frequency = <50000000>;
120		reg = <0>;
121	};
122};
123
124&sata0 {
125	status = "okay";
126};
127
128&sata1 {
129	status = "okay";
130};
131
132&usb0 {
133	status = "okay";
134};
135
136&usb1 {
137	status = "okay";
138};
139