xref: /freebsd/sys/contrib/device-tree/src/arm64/freescale/fsl-ls208xa-rdb.dtsi (revision 8bab661a3316d8bd9b9fbd11a3b4371b91507bd2) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree file for Freescale LS2080A RDB Board.
4 *
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * Copyright 2017-2020 NXP
7 *
8 * Abhimanyu Saini <abhimanyu.saini@nxp.com>
9 *
10 */
11
12&esdhc {
13	status = "okay";
14};
15
16&ifc {
17	status = "okay";
18	#address-cells = <2>;
19	#size-cells = <1>;
20	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
21		  0x2 0x0 0x5 0x30000000 0x00010000
22		  0x3 0x0 0x5 0x20000000 0x00010000>;
23
24	nor@0,0 {
25		#address-cells = <1>;
26		#size-cells = <1>;
27		compatible = "cfi-flash";
28		reg = <0x0 0x0 0x8000000>;
29		bank-width = <2>;
30		device-width = <1>;
31	};
32
33	nand@2,0 {
34	     compatible = "fsl,ifc-nand";
35	     reg = <0x2 0x0 0x10000>;
36	};
37
38	cpld@3,0 {
39	     reg = <0x3 0x0 0x10000>;
40	     compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
41	};
42
43};
44
45&i2c0 {
46	status = "okay";
47	i2c-mux@75 {
48		compatible = "nxp,pca9547";
49		reg = <0x75>;
50		#address-cells = <1>;
51		#size-cells = <0>;
52		idle-state = <0>;
53
54		i2c@1 {
55			#address-cells = <1>;
56			#size-cells = <0>;
57			reg = <0x01>;
58			rtc@68 {
59				compatible = "dallas,ds3232";
60				reg = <0x68>;
61				/* IRQ_RTC_B -> IRQ06, active low */
62				interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
63			};
64		};
65
66		i2c@2 {
67			#address-cells = <1>;
68			#size-cells = <0>;
69			reg = <0x02>;
70
71			ina220@40 {
72				compatible = "ti,ina220";
73				reg = <0x40>;
74				shunt-resistor = <500>;
75			};
76		};
77
78		i2c@3 {
79			#address-cells = <1>;
80			#size-cells = <0>;
81			reg = <0x3>;
82
83			adt7481@4c {
84				compatible = "adi,adt7461";
85				reg = <0x4c>;
86			};
87		};
88	};
89};
90
91&i2c1 {
92	status = "disabled";
93};
94
95&i2c2 {
96	status = "disabled";
97};
98
99&i2c3 {
100	status = "disabled";
101};
102
103&dspi {
104	status = "okay";
105	dflash0: flash@0 {
106		#address-cells = <1>;
107		#size-cells = <1>;
108		compatible = "st,m25p80";
109		spi-max-frequency = <3000000>;
110		reg = <0>;
111	};
112};
113
114&qspi {
115	status = "okay";
116
117	s25fs512s0: flash@0 {
118		#address-cells = <1>;
119		#size-cells = <1>;
120		compatible = "jedec,spi-nor";
121		spi-max-frequency = <50000000>;
122		reg = <0>;
123	};
124};
125
126&sata0 {
127	status = "okay";
128};
129
130&sata1 {
131	status = "okay";
132};
133
134&usb0 {
135	status = "okay";
136};
137
138&usb1 {
139	status = "okay";
140};
141