xref: /freebsd/sys/contrib/device-tree/src/arm64/freescale/fsl-ls208xa-qds.dtsi (revision 7ef62cebc2f965b0f640263e179276928885e33d) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree file for Freescale LS2080A QDS Board.
4 *
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * Copyright 2017 NXP
7 *
8 * Abhimanyu Saini <abhimanyu.saini@nxp.com>
9 *
10 */
11
12/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
13&dpmac9 {
14	phy-handle = <&mdio0_phy12>;
15	phy-connection-type = "sgmii";
16};
17
18&dpmac10 {
19	phy-handle = <&mdio0_phy13>;
20	phy-connection-type = "sgmii";
21};
22
23&dpmac11 {
24	phy-handle = <&mdio0_phy14>;
25	phy-connection-type = "sgmii";
26};
27
28&dpmac12 {
29	phy-handle = <&mdio0_phy15>;
30	phy-connection-type = "sgmii";
31};
32
33&esdhc {
34	mmc-hs200-1_8v;
35	status = "okay";
36};
37
38&ifc {
39	status = "okay";
40	#address-cells = <2>;
41	#size-cells = <1>;
42	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
43		  0x2 0x0 0x5 0x30000000 0x00010000
44		  0x3 0x0 0x5 0x20000000 0x00010000>;
45
46	nor@0,0 {
47		#address-cells = <1>;
48		#size-cells = <1>;
49		compatible = "cfi-flash";
50		reg = <0x0 0x0 0x8000000>;
51		bank-width = <2>;
52		device-width = <1>;
53	};
54
55	nand@2,0 {
56	     compatible = "fsl,ifc-nand";
57	     reg = <0x2 0x0 0x10000>;
58	};
59
60	boardctrl: board-control@3,0 {
61		#address-cells = <1>;
62		#size-cells = <1>;
63		compatible = "fsl,ls208xaqds-fpga", "fsl,fpga-qixis", "simple-mfd";
64		reg = <3 0 0x1000>;
65		ranges = <0 3 0 0x1000>;
66
67		mdio-mux-emi1@54 {
68			compatible = "mdio-mux-mmioreg", "mdio-mux";
69			mdio-parent-bus = <&emdio1>;
70			reg = <0x54 1>;		/* BRDCFG4 */
71			mux-mask = <0xe0>;	/* EMI1_MDIO */
72			#address-cells=<1>;
73			#size-cells = <0>;
74
75			/* Child MDIO buses, one for each riser card:
76			 * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
77			 * VSC8234 PHYs on the riser cards.
78			 */
79			mdio_mux3: mdio@60 {
80				reg = <0x60>;
81				#address-cells = <1>;
82				#size-cells = <0>;
83
84				mdio0_phy12: mdio-phy0@1c {
85					reg = <0x1c>;
86				};
87
88				mdio0_phy13: mdio-phy1@1d {
89					reg = <0x1d>;
90				};
91
92				mdio0_phy14: mdio-phy2@1e {
93					reg = <0x1e>;
94				};
95
96				mdio0_phy15: mdio-phy3@1f {
97					reg = <0x1f>;
98				};
99			};
100		};
101	};
102};
103
104&i2c0 {
105	status = "okay";
106	pca9547@77 {
107		compatible = "nxp,pca9547";
108		reg = <0x77>;
109		#address-cells = <1>;
110		#size-cells = <0>;
111		i2c@0 {
112			#address-cells = <1>;
113			#size-cells = <0>;
114			reg = <0x00>;
115			rtc@68 {
116				compatible = "dallas,ds3232";
117				reg = <0x68>;
118			};
119		};
120
121		i2c@2 {
122			#address-cells = <1>;
123			#size-cells = <0>;
124			reg = <0x02>;
125
126			ina220@40 {
127				compatible = "ti,ina220";
128				reg = <0x40>;
129				shunt-resistor = <500>;
130			};
131
132			ina220@41 {
133				compatible = "ti,ina220";
134				reg = <0x41>;
135				shunt-resistor = <1000>;
136			};
137		};
138
139		i2c@3 {
140			#address-cells = <1>;
141			#size-cells = <0>;
142			reg = <0x3>;
143
144			adt7481@4c {
145				compatible = "adi,adt7461";
146				reg = <0x4c>;
147			};
148		};
149	};
150};
151
152&i2c1 {
153	status = "disabled";
154};
155
156&i2c2 {
157	status = "disabled";
158};
159
160&i2c3 {
161	status = "disabled";
162};
163
164&dspi {
165	status = "okay";
166	dflash0: flash@0 {
167		#address-cells = <1>;
168		#size-cells = <1>;
169		compatible = "st,m25p80";
170		spi-max-frequency = <3000000>;
171		reg = <0>;
172	};
173	dflash1: flash@1 {
174		#address-cells = <1>;
175		#size-cells = <1>;
176		compatible = "st,m25p80";
177		spi-max-frequency = <3000000>;
178		reg = <1>;
179	};
180	dflash2: flash@2 {
181		#address-cells = <1>;
182		#size-cells = <1>;
183		compatible = "st,m25p80";
184		spi-max-frequency = <3000000>;
185		reg = <2>;
186	};
187};
188
189&qspi {
190	status = "okay";
191	flash0: flash@0 {
192		#address-cells = <1>;
193		#size-cells = <1>;
194		compatible = "st,m25p80";
195		spi-max-frequency = <20000000>;
196		spi-rx-bus-width = <4>;
197		spi-tx-bus-width = <4>;
198		reg = <0>;
199	};
200	flash2: flash@2 {
201		#address-cells = <1>;
202		#size-cells = <1>;
203		compatible = "st,m25p80";
204		spi-max-frequency = <20000000>;
205		spi-rx-bus-width = <4>;
206		spi-tx-bus-width = <4>;
207		reg = <2>;
208	};
209};
210
211&sata0 {
212	status = "okay";
213};
214
215&sata1 {
216	status = "okay";
217};
218
219&usb0 {
220	status = "okay";
221};
222
223&usb1 {
224	status = "okay";
225};
226