1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Device Tree file for Travese Ten64 (LS1088) board 4 * Based on fsl-ls1088a-rdb.dts 5 * Copyright 2017-2020 NXP 6 * Copyright 2019-2021 Traverse Technologies 7 * 8 * Author: Mathew McBride <matt@traverse.com.au> 9 */ 10 11/dts-v1/; 12 13#include "fsl-ls1088a.dtsi" 14 15#include <dt-bindings/gpio/gpio.h> 16#include <dt-bindings/input/input.h> 17 18/ { 19 model = "Traverse Ten64"; 20 compatible = "traverse,ten64", "fsl,ls1088a"; 21 22 aliases { 23 serial0 = &duart0; 24 serial1 = &duart1; 25 }; 26 27 chosen { 28 stdout-path = "serial0:115200n8"; 29 }; 30 31 buttons { 32 compatible = "gpio-keys"; 33 34 /* Fired by system controller when 35 * external power off (e.g ATX Power Button) 36 * asserted 37 */ 38 button-powerdn { 39 label = "External Power Down"; 40 gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; 41 linux,code = <KEY_POWER>; 42 }; 43 44 /* Rear Panel 'ADMIN' button (GPIO_H) */ 45 button-admin { 46 label = "ADMIN button"; 47 gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; 48 linux,code = <KEY_WPS_BUTTON>; 49 }; 50 }; 51 52 leds { 53 compatible = "gpio-leds"; 54 55 led-0 { 56 label = "ten64:green:sfp1:down"; 57 gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; 58 }; 59 60 led-1 { 61 label = "ten64:green:sfp2:up"; 62 gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; 63 }; 64 65 led-2 { 66 label = "ten64:admin"; 67 gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>; 68 }; 69 }; 70 71 sfp_xg0: dpmac2-sfp { 72 compatible = "sff,sfp"; 73 i2c-bus = <&sfplower_i2c>; 74 tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>; 75 tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>; 76 mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>; 77 los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>; 78 maximum-power-milliwatt = <2000>; 79 }; 80 81 sfp_xg1: dpmac1-sfp { 82 compatible = "sff,sfp"; 83 i2c-bus = <&sfpupper_i2c>; 84 tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>; 85 tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>; 86 mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>; 87 los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>; 88 maximum-power-milliwatt = <2000>; 89 }; 90}; 91 92/* XG1 - Upper SFP */ 93&dpmac1 { 94 sfp = <&sfp_xg1>; 95 pcs-handle = <&pcs1>; 96 phy-connection-type = "10gbase-r"; 97 managed = "in-band-status"; 98}; 99 100/* XG0 - Lower SFP */ 101&dpmac2 { 102 sfp = <&sfp_xg0>; 103 pcs-handle = <&pcs2>; 104 phy-connection-type = "10gbase-r"; 105 managed = "in-band-status"; 106}; 107 108/* DPMAC3..6 is GE4 to GE8 */ 109&dpmac3 { 110 phy-handle = <&mdio1_phy5>; 111 phy-connection-type = "qsgmii"; 112 managed = "in-band-status"; 113 pcs-handle = <&pcs3_0>; 114}; 115 116&dpmac4 { 117 phy-handle = <&mdio1_phy6>; 118 phy-connection-type = "qsgmii"; 119 managed = "in-band-status"; 120 pcs-handle = <&pcs3_1>; 121}; 122 123&dpmac5 { 124 phy-handle = <&mdio1_phy7>; 125 phy-connection-type = "qsgmii"; 126 managed = "in-band-status"; 127 pcs-handle = <&pcs3_2>; 128}; 129 130&dpmac6 { 131 phy-handle = <&mdio1_phy8>; 132 phy-connection-type = "qsgmii"; 133 managed = "in-band-status"; 134 pcs-handle = <&pcs3_3>; 135}; 136 137/* DPMAC7..10 is GE0 to GE3 */ 138&dpmac7 { 139 phy-handle = <&mdio1_phy1>; 140 phy-connection-type = "qsgmii"; 141 managed = "in-band-status"; 142 pcs-handle = <&pcs7_0>; 143}; 144 145&dpmac8 { 146 phy-handle = <&mdio1_phy2>; 147 phy-connection-type = "qsgmii"; 148 managed = "in-band-status"; 149 pcs-handle = <&pcs7_1>; 150}; 151 152&dpmac9 { 153 phy-handle = <&mdio1_phy3>; 154 phy-connection-type = "qsgmii"; 155 managed = "in-band-status"; 156 pcs-handle = <&pcs7_2>; 157}; 158 159&dpmac10 { 160 phy-handle = <&mdio1_phy4>; 161 phy-connection-type = "qsgmii"; 162 managed = "in-band-status"; 163 pcs-handle = <&pcs7_3>; 164}; 165 166&duart0 { 167 status = "okay"; 168}; 169 170&duart1 { 171 status = "okay"; 172}; 173 174&emdio1 { 175 status = "okay"; 176 177 mdio1_phy5: ethernet-phy@c { 178 reg = <0xc>; 179 }; 180 181 mdio1_phy6: ethernet-phy@d { 182 reg = <0xd>; 183 }; 184 185 mdio1_phy7: ethernet-phy@e { 186 reg = <0xe>; 187 }; 188 189 mdio1_phy8: ethernet-phy@f { 190 reg = <0xf>; 191 }; 192 193 mdio1_phy1: ethernet-phy@1c { 194 reg = <0x1c>; 195 }; 196 197 mdio1_phy2: ethernet-phy@1d { 198 reg = <0x1d>; 199 }; 200 201 mdio1_phy3: ethernet-phy@1e { 202 reg = <0x1e>; 203 }; 204 205 mdio1_phy4: ethernet-phy@1f { 206 reg = <0x1f>; 207 }; 208}; 209 210&esdhc { 211 status = "okay"; 212}; 213 214&i2c0 { 215 status = "okay"; 216 217 sfpgpio: gpio@76 { 218 compatible = "ti,tca9539"; 219 reg = <0x76>; 220 #gpio-cells = <2>; 221 gpio-controller; 222 223 admin_led_lower { 224 gpio-hog; 225 gpios = <13 GPIO_ACTIVE_HIGH>; 226 output-low; 227 }; 228 }; 229 230 at97sc: tpm@29 { 231 compatible = "atmel,at97sc3204t"; 232 reg = <0x29>; 233 }; 234}; 235 236&i2c2 { 237 status = "okay"; 238 239 rx8035: rtc@32 { 240 compatible = "epson,rx8035"; 241 reg = <0x32>; 242 }; 243}; 244 245&i2c3 { 246 status = "okay"; 247 248 i2c-mux@70 { 249 compatible = "nxp,pca9540"; 250 #address-cells = <1>; 251 #size-cells = <0>; 252 reg = <0x70>; 253 254 sfpupper_i2c: i2c@0 { 255 #address-cells = <1>; 256 #size-cells = <0>; 257 reg = <0>; 258 }; 259 260 sfplower_i2c: i2c@1 { 261 #address-cells = <1>; 262 #size-cells = <0>; 263 reg = <1>; 264 }; 265 }; 266}; 267 268&pcs_mdio1 { 269 status = "okay"; 270}; 271 272&pcs_mdio2 { 273 status = "okay"; 274}; 275 276&pcs_mdio3 { 277 status = "okay"; 278}; 279 280&pcs_mdio7 { 281 status = "okay"; 282}; 283 284&qspi { 285 status = "okay"; 286 287 en25s64: flash@0 { 288 compatible = "jedec,spi-nor"; 289 #address-cells = <1>; 290 #size-cells = <1>; 291 reg = <0>; 292 spi-max-frequency = <20000000>; 293 spi-rx-bus-width = <4>; 294 spi-tx-bus-width = <4>; 295 296 partitions { 297 compatible = "fixed-partitions"; 298 #address-cells = <1>; 299 #size-cells = <1>; 300 301 partition@0 { 302 label = "bl2"; 303 reg = <0 0x100000>; 304 }; 305 306 partition@100000 { 307 label = "bl3"; 308 reg = <0x100000 0x200000>; 309 }; 310 311 partition@300000 { 312 label = "mcfirmware"; 313 reg = <0x300000 0x200000>; 314 }; 315 316 partition@500000 { 317 label = "ubootenv"; 318 reg = <0x500000 0x80000>; 319 }; 320 321 partition@580000 { 322 label = "dpl"; 323 reg = <0x580000 0x40000>; 324 }; 325 326 partition@5C0000 { 327 label = "dpc"; 328 reg = <0x5C0000 0x40000>; 329 }; 330 331 partition@600000 { 332 label = "devicetree"; 333 reg = <0x600000 0x40000>; 334 }; 335 }; 336 }; 337 338 nand: flash@1 { 339 compatible = "spi-nand"; 340 #address-cells = <1>; 341 #size-cells = <1>; 342 reg = <1>; 343 spi-max-frequency = <20000000>; 344 spi-rx-bus-width = <4>; 345 spi-tx-bus-width = <4>; 346 347 partitions { 348 compatible = "fixed-partitions"; 349 #address-cells = <1>; 350 #size-cells = <1>; 351 352 /* reserved for future boot direct from NAND flash 353 * (this would use the same layout as the 8MiB NOR flash) 354 */ 355 partition@0 { 356 label = "nand-boot-reserved"; 357 reg = <0 0x800000>; 358 }; 359 360 /* recovery / install environment */ 361 partition@800000 { 362 label = "recovery"; 363 reg = <0x800000 0x2000000>; 364 }; 365 366 /* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */ 367 partition@2800000 { 368 label = "ubia"; 369 reg = <0x2800000 0x6C00000>; 370 }; 371 372 /* ubib (second OpenWrt) */ 373 partition@9400000 { 374 label = "ubib"; 375 reg = <0x9400000 0x6C00000>; 376 }; 377 }; 378 }; 379}; 380 381&usb0 { 382 status = "okay"; 383}; 384 385&usb1 { 386 status = "okay"; 387}; 388