1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Device Tree file for NXP LS1088A QDS Board. 4 * 5 * Copyright 2017 NXP 6 * 7 * Harninder Rai <harninder.rai@nxp.com> 8 * 9 */ 10 11/dts-v1/; 12 13#include "fsl-ls1088a.dtsi" 14 15/ { 16 model = "LS1088A QDS Board"; 17 compatible = "fsl,ls1088a-qds", "fsl,ls1088a"; 18}; 19 20&dspi { 21 bus-num = <0>; 22 status = "okay"; 23 24 flash@0 { 25 #address-cells = <1>; 26 #size-cells = <1>; 27 compatible = "jedec,spi-nor"; 28 reg = <0>; 29 spi-max-frequency = <1000000>; 30 }; 31 32 flash@1 { 33 #address-cells = <1>; 34 #size-cells = <1>; 35 compatible = "jedec,spi-nor"; 36 spi-cpol; 37 spi-cpha; 38 spi-max-frequency = <3500000>; 39 reg = <1>; 40 }; 41 42 flash@2 { 43 #address-cells = <1>; 44 #size-cells = <1>; 45 compatible = "jedec,spi-nor"; 46 spi-cpol; 47 spi-cpha; 48 spi-max-frequency = <3500000>; 49 reg = <2>; 50 }; 51}; 52 53&i2c0 { 54 status = "okay"; 55 56 i2c-mux@77 { 57 compatible = "nxp,pca9547"; 58 reg = <0x77>; 59 #address-cells = <1>; 60 #size-cells = <0>; 61 62 i2c@2 { 63 #address-cells = <1>; 64 #size-cells = <0>; 65 reg = <0x2>; 66 67 ina220@40 { 68 compatible = "ti,ina220"; 69 reg = <0x40>; 70 shunt-resistor = <1000>; 71 }; 72 73 ina220@41 { 74 compatible = "ti,ina220"; 75 reg = <0x41>; 76 shunt-resistor = <1000>; 77 }; 78 }; 79 80 i2c@3 { 81 #address-cells = <1>; 82 #size-cells = <0>; 83 reg = <0x3>; 84 85 temp-sensor@4c { 86 compatible = "adi,adt7461a"; 87 reg = <0x4c>; 88 }; 89 90 rtc@51 { 91 compatible = "nxp,pcf2129"; 92 reg = <0x51>; 93 /* IRQ10_B */ 94 interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; 95 }; 96 97 eeprom@56 { 98 compatible = "atmel,24c512"; 99 reg = <0x56>; 100 }; 101 102 eeprom@57 { 103 compatible = "atmel,24c512"; 104 reg = <0x57>; 105 }; 106 }; 107 }; 108}; 109 110&ifc { 111 ranges = <0 0 0x5 0x80000000 0x08000000 112 2 0 0x5 0x30000000 0x00010000 113 3 0 0x5 0x20000000 0x00010000>; 114 status = "okay"; 115 116 nor@0,0 { 117 compatible = "cfi-flash"; 118 reg = <0x0 0x0 0x8000000>; 119 bank-width = <2>; 120 device-width = <1>; 121 }; 122 123 nand@2,0 { 124 compatible = "fsl,ifc-nand"; 125 reg = <0x2 0x0 0x10000>; 126 }; 127 128 fpga: board-control@3,0 { 129 compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis"; 130 reg = <0x3 0x0 0x0000100>; 131 }; 132}; 133 134&duart0 { 135 status = "okay"; 136}; 137 138&duart1 { 139 status = "okay"; 140}; 141 142&esdhc { 143 status = "okay"; 144}; 145 146&qspi { 147 status = "okay"; 148 149 s25fs512s0: flash@0 { 150 compatible = "jedec,spi-nor"; 151 #address-cells = <1>; 152 #size-cells = <1>; 153 spi-max-frequency = <50000000>; 154 spi-rx-bus-width = <4>; 155 spi-tx-bus-width = <1>; 156 reg = <0>; 157 }; 158 159 s25fs512s1: flash@1 { 160 compatible = "jedec,spi-nor"; 161 #address-cells = <1>; 162 #size-cells = <1>; 163 spi-max-frequency = <50000000>; 164 spi-rx-bus-width = <4>; 165 spi-tx-bus-width = <1>; 166 reg = <1>; 167 }; 168}; 169 170&sata { 171 status = "okay"; 172}; 173