1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2022 Broadcom Ltd. 4 */ 5 6#include <dt-bindings/interrupt-controller/irq.h> 7#include <dt-bindings/interrupt-controller/arm-gic.h> 8 9/ { 10 compatible = "brcm,bcm63158", "brcm,bcmbca"; 11 #address-cells = <2>; 12 #size-cells = <2>; 13 14 interrupt-parent = <&gic>; 15 16 cpus { 17 #address-cells = <2>; 18 #size-cells = <0>; 19 20 B53_0: cpu@0 { 21 compatible = "brcm,brahma-b53"; 22 device_type = "cpu"; 23 reg = <0x0 0x0>; 24 next-level-cache = <&L2_0>; 25 enable-method = "psci"; 26 }; 27 28 B53_1: cpu@1 { 29 compatible = "brcm,brahma-b53"; 30 device_type = "cpu"; 31 reg = <0x0 0x1>; 32 next-level-cache = <&L2_0>; 33 enable-method = "psci"; 34 }; 35 36 B53_2: cpu@2 { 37 compatible = "brcm,brahma-b53"; 38 device_type = "cpu"; 39 reg = <0x0 0x2>; 40 next-level-cache = <&L2_0>; 41 enable-method = "psci"; 42 }; 43 44 B53_3: cpu@3 { 45 compatible = "brcm,brahma-b53"; 46 device_type = "cpu"; 47 reg = <0x0 0x3>; 48 next-level-cache = <&L2_0>; 49 enable-method = "psci"; 50 }; 51 52 L2_0: l2-cache0 { 53 compatible = "cache"; 54 cache-level = <2>; 55 cache-unified; 56 }; 57 }; 58 59 timer { 60 compatible = "arm,armv8-timer"; 61 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 62 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 63 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 64 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 65 }; 66 67 pmu: pmu { 68 compatible = "arm,cortex-a53-pmu"; 69 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, 70 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, 71 <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, 72 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 73 interrupt-affinity = <&B53_0>, <&B53_1>, 74 <&B53_2>, <&B53_3>; 75 }; 76 77 clocks: clocks { 78 periph_clk: periph-clk { 79 compatible = "fixed-clock"; 80 #clock-cells = <0>; 81 clock-frequency = <200000000>; 82 }; 83 84 uart_clk: uart-clk { 85 compatible = "fixed-factor-clock"; 86 #clock-cells = <0>; 87 clocks = <&periph_clk>; 88 clock-div = <4>; 89 clock-mult = <1>; 90 }; 91 92 hsspi_pll: hsspi-pll { 93 compatible = "fixed-clock"; 94 #clock-cells = <0>; 95 clock-frequency = <400000000>; 96 }; 97 }; 98 99 psci { 100 compatible = "arm,psci-0.2"; 101 method = "smc"; 102 }; 103 104 axi@81000000 { 105 compatible = "simple-bus"; 106 #address-cells = <1>; 107 #size-cells = <1>; 108 ranges = <0x0 0x0 0x81000000 0x8000>; 109 110 gic: interrupt-controller@1000 { 111 compatible = "arm,gic-400"; 112 #interrupt-cells = <3>; 113 interrupt-controller; 114 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 115 reg = <0x1000 0x1000>, 116 <0x2000 0x2000>, 117 <0x4000 0x2000>, 118 <0x6000 0x2000>; 119 }; 120 }; 121 122 bus@ff800000 { 123 compatible = "simple-bus"; 124 #address-cells = <1>; 125 #size-cells = <1>; 126 ranges = <0x0 0x0 0xff800000 0x800000>; 127 128 hsspi: spi@1000 { 129 #address-cells = <1>; 130 #size-cells = <0>; 131 compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0"; 132 reg = <0x1000 0x600>; 133 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 134 clocks = <&hsspi_pll &hsspi_pll>; 135 clock-names = "hsspi", "pll"; 136 num-cs = <8>; 137 status = "disabled"; 138 }; 139 140 uart0: serial@12000 { 141 compatible = "arm,pl011", "arm,primecell"; 142 reg = <0x12000 0x1000>; 143 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 144 clocks = <&uart_clk>, <&uart_clk>; 145 clock-names = "uartclk", "apb_pclk"; 146 status = "disabled"; 147 }; 148 }; 149}; 150