1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2 3#include <dt-bindings/gpio/gpio.h> 4#include <dt-bindings/input/input.h> 5#include <dt-bindings/leds/common.h> 6 7#include "bcm4906.dtsi" 8 9/ { 10 compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; 11 model = "Netgear R8000P"; 12 13 memory@0 { 14 device_type = "memory"; 15 reg = <0x00 0x00 0x00 0x20000000>; 16 }; 17 18 leds { 19 compatible = "gpio-leds"; 20 21 led-power-white { 22 function = LED_FUNCTION_POWER; 23 color = <LED_COLOR_ID_WHITE>; 24 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; 25 }; 26 27 led-power-amber { 28 function = LED_FUNCTION_POWER; 29 color = <LED_COLOR_ID_AMBER>; 30 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; 31 }; 32 33 led-wps { 34 function = LED_FUNCTION_WPS; 35 color = <LED_COLOR_ID_WHITE>; 36 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; 37 }; 38 39 led-2ghz { 40 function = "2ghz"; 41 color = <LED_COLOR_ID_WHITE>; 42 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; 43 }; 44 45 led-5ghz-1 { 46 function = "5ghz-1"; 47 color = <LED_COLOR_ID_WHITE>; 48 gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; 49 }; 50 51 led-5ghz-2 { 52 function = "5ghz-2"; 53 color = <LED_COLOR_ID_WHITE>; 54 gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; 55 }; 56 57 led-usb2 { 58 function = "usb2"; 59 color = <LED_COLOR_ID_WHITE>; 60 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; 61 trigger-sources = <&ohci_port1>, <&ehci_port1>; 62 linux,default-trigger = "usbport"; 63 }; 64 65 led-usb3 { 66 function = "usb3"; 67 color = <LED_COLOR_ID_WHITE>; 68 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; 69 trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>; 70 linux,default-trigger = "usbport"; 71 }; 72 73 led-wifi { 74 function = "wifi"; 75 color = <LED_COLOR_ID_WHITE>; 76 gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; 77 }; 78 }; 79}; 80 81&enet { 82 nvmem-cells = <&base_mac_addr>; 83 nvmem-cell-names = "mac-address"; 84}; 85 86&usb_phy { 87 brcm,ioc = <1>; 88 status = "okay"; 89}; 90 91&ehci { 92 status = "okay"; 93}; 94 95&ohci { 96 status = "okay"; 97}; 98 99&xhci { 100 status = "okay"; 101}; 102 103&ports { 104 port@0 { 105 label = "lan4"; 106 }; 107 108 port@1 { 109 label = "lan3"; 110 }; 111 112 port@2 { 113 label = "lan2"; 114 }; 115 116 port@3 { 117 label = "lan1"; 118 }; 119 120 port@7 { 121 reg = <7>; 122 phy-mode = "internal"; 123 phy-handle = <&phy12>; 124 label = "wan"; 125 }; 126}; 127 128&nandcs { 129 nand-ecc-strength = <4>; 130 nand-ecc-step-size = <512>; 131 nand-on-flash-bbt; 132 133 #address-cells = <1>; 134 #size-cells = <0>; 135 136 partitions { 137 compatible = "fixed-partitions"; 138 #address-cells = <1>; 139 #size-cells = <1>; 140 141 partition@0 { 142 compatible = "nvmem-cells"; 143 label = "cferom"; 144 reg = <0x0 0x100000>; 145 146 #address-cells = <1>; 147 #size-cells = <1>; 148 ranges = <0 0x0 0x100000>; 149 150 base_mac_addr: mac@106a0 { 151 reg = <0x106a0 0x6>; 152 }; 153 }; 154 155 partition@100000 { 156 compatible = "brcm,bcm4908-firmware"; 157 label = "firmware"; 158 reg = <0x100000 0x4400000>; 159 }; 160 }; 161}; 162