xref: /freebsd/sys/contrib/device-tree/src/arm64/broadcom/bcm4908/bcm4908.dtsi (revision 5956d97f4b3204318ceb6aa9c77bd0bc6ea87a41) 
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3#include <dt-bindings/interrupt-controller/irq.h>
4#include <dt-bindings/interrupt-controller/arm-gic.h>
5#include <dt-bindings/phy/phy.h>
6#include <dt-bindings/soc/bcm-pmb.h>
7
8/dts-v1/;
9
10/ {
11	interrupt-parent = <&gic>;
12
13	#address-cells = <2>;
14	#size-cells = <2>;
15
16	aliases {
17		serial0 = &uart0;
18	};
19
20	chosen {
21		stdout-path = "serial0:115200n8";
22	};
23
24	cpus {
25		#address-cells = <1>;
26		#size-cells = <0>;
27
28		cpu0: cpu@0 {
29			device_type = "cpu";
30			compatible = "brcm,brahma-b53";
31			reg = <0x0>;
32			next-level-cache = <&l2>;
33		};
34
35		cpu1: cpu@1 {
36			device_type = "cpu";
37			compatible = "brcm,brahma-b53";
38			reg = <0x1>;
39			enable-method = "spin-table";
40			cpu-release-addr = <0x0 0xfff8>;
41			next-level-cache = <&l2>;
42		};
43
44		cpu2: cpu@2 {
45			device_type = "cpu";
46			compatible = "brcm,brahma-b53";
47			reg = <0x2>;
48			enable-method = "spin-table";
49			cpu-release-addr = <0x0 0xfff8>;
50			next-level-cache = <&l2>;
51		};
52
53		cpu3: cpu@3 {
54			device_type = "cpu";
55			compatible = "brcm,brahma-b53";
56			reg = <0x3>;
57			enable-method = "spin-table";
58			cpu-release-addr = <0x0 0xfff8>;
59			next-level-cache = <&l2>;
60		};
61
62		l2: l2-cache0 {
63			compatible = "cache";
64		};
65	};
66
67	axi@81000000 {
68		compatible = "simple-bus";
69		#address-cells = <1>;
70		#size-cells = <1>;
71		ranges = <0x00 0x00 0x81000000 0x4000>;
72
73		gic: interrupt-controller@1000 {
74			compatible = "arm,gic-400";
75			#interrupt-cells = <3>;
76			#address-cells = <0>;
77			interrupt-controller;
78			reg = <0x1000 0x1000>,
79			      <0x2000 0x2000>;
80		};
81	};
82
83	timer {
84		compatible = "arm,armv8-timer";
85		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
86			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
87			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
88			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
89	};
90
91	pmu {
92		compatible = "arm,cortex-a53-pmu";
93		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
94			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
95			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
96			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
97		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
98	};
99
100	clocks {
101		periph_clk: periph_clk {
102			compatible = "fixed-clock";
103			#clock-cells = <0>;
104			clock-frequency = <50000000>;
105			clock-output-names = "periph";
106		};
107	};
108
109	soc {
110		compatible = "simple-bus";
111		#address-cells = <1>;
112		#size-cells = <1>;
113		ranges = <0x00 0x00 0x80000000 0x281000>;
114
115		enet: ethernet@2000 {
116			compatible = "brcm,bcm4908-enet";
117			reg = <0x2000 0x1000>;
118
119			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
120				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
121			interrupt-names = "rx", "tx";
122		};
123
124		usb_phy: usb-phy@c200 {
125			compatible = "brcm,bcm4908-usb-phy";
126			reg = <0xc200 0x100>;
127			reg-names = "ctrl";
128			power-domains = <&pmb BCM_PMB_HOST_USB>;
129			dr_mode = "host";
130			brcm,has-xhci;
131			brcm,has-eohci;
132			#phy-cells = <1>;
133			status = "disabled";
134		};
135
136		ehci: usb@c300 {
137			compatible = "generic-ehci";
138			reg = <0xc300 0x100>;
139			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
140			phys = <&usb_phy PHY_TYPE_USB2>;
141			status = "disabled";
142		};
143
144		ohci: usb@c400 {
145			compatible = "generic-ohci";
146			reg = <0xc400 0x100>;
147			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
148			phys = <&usb_phy PHY_TYPE_USB2>;
149			status = "disabled";
150		};
151
152		xhci: usb@d000 {
153			compatible = "generic-xhci";
154			reg = <0xd000 0x8c8>;
155			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
156			phys = <&usb_phy PHY_TYPE_USB3>;
157			status = "disabled";
158		};
159
160		bus@80000 {
161			compatible = "simple-bus";
162			#size-cells = <1>;
163			#address-cells = <1>;
164			ranges = <0 0x80000 0x50000>;
165
166			ethernet-switch@0 {
167				compatible = "brcm,bcm4908-switch";
168				reg = <0x0 0x40000>,
169				      <0x40000 0x110>,
170				      <0x40340 0x30>,
171				      <0x40380 0x30>,
172				      <0x40600 0x34>,
173				      <0x40800 0x208>;
174				reg-names = "core", "reg", "intrl2_0",
175					    "intrl2_1", "fcb", "acb";
176				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
177					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
178				brcm,num-gphy = <5>;
179				brcm,num-rgmii-ports = <2>;
180
181				#address-cells = <1>;
182				#size-cells = <0>;
183
184				ports: ports {
185					#address-cells = <1>;
186					#size-cells = <0>;
187
188					port@0 {
189						reg = <0>;
190						phy-mode = "internal";
191						phy-handle = <&phy8>;
192					};
193
194					port@1 {
195						reg = <1>;
196						phy-mode = "internal";
197						phy-handle = <&phy9>;
198					};
199
200					port@2 {
201						reg = <2>;
202						phy-mode = "internal";
203						phy-handle = <&phy10>;
204					};
205
206					port@3 {
207						reg = <3>;
208						phy-mode = "internal";
209						phy-handle = <&phy11>;
210					};
211
212					port@8 {
213						reg = <8>;
214						phy-mode = "internal";
215						ethernet = <&enet>;
216
217						fixed-link {
218							speed = <1000>;
219							full-duplex;
220						};
221					};
222				};
223			};
224
225			mdio: mdio@405c0 {
226				compatible = "brcm,unimac-mdio";
227				reg = <0x405c0 0x8>;
228				reg-names = "mdio";
229				#size-cells = <0>;
230				#address-cells = <1>;
231
232				phy8: ethernet-phy@8 {
233					reg = <8>;
234				};
235
236				phy9: ethernet-phy@9 {
237					reg = <9>;
238				};
239
240				phy10: ethernet-phy@a {
241					reg = <10>;
242				};
243
244				phy11: ethernet-phy@b {
245					reg = <11>;
246				};
247
248				phy12: ethernet-phy@c {
249					reg = <12>;
250				};
251			};
252		};
253
254		procmon: syscon@280000 {
255			compatible = "simple-bus";
256			reg = <0x280000 0x1000>;
257			ranges;
258
259			#address-cells = <1>;
260			#size-cells = <1>;
261
262			pmb: power-controller@2800c0 {
263				compatible = "brcm,bcm4908-pmb";
264				reg = <0x2800c0 0x40>;
265				#power-domain-cells = <1>;
266			};
267		};
268	};
269
270	bus@ff800000 {
271		compatible = "simple-bus";
272		#address-cells = <1>;
273		#size-cells = <1>;
274		ranges = <0x00 0x00 0xff800000 0x3000>;
275
276		timer: timer@400 {
277			compatible = "brcm,bcm6328-timer", "syscon";
278			reg = <0x400 0x3c>;
279		};
280
281		gpio0: gpio-controller@500 {
282			compatible = "brcm,bcm6345-gpio";
283			reg-names = "dirout", "dat";
284			reg = <0x500 0x28>, <0x528 0x28>;
285
286			#gpio-cells = <2>;
287			gpio-controller;
288		};
289
290		uart0: serial@640 {
291			compatible = "brcm,bcm6345-uart";
292			reg = <0x640 0x18>;
293			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
294			clocks = <&periph_clk>;
295			clock-names = "periph";
296			status = "okay";
297		};
298
299		nand@1800 {
300			#address-cells = <1>;
301			#size-cells = <0>;
302			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
303			reg = <0x1800 0x600>, <0x2000 0x10>;
304			reg-names = "nand", "nand-int-base";
305			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
306			interrupt-names = "nand";
307			status = "okay";
308
309			nandcs: nand@0 {
310				compatible = "brcm,nandcs";
311				reg = <0>;
312			};
313		};
314
315		misc@2600 {
316			compatible = "brcm,misc", "simple-mfd";
317			reg = <0x2600 0xe4>;
318
319			#address-cells = <1>;
320			#size-cells = <1>;
321			ranges = <0x00 0x2600 0xe4>;
322
323			reset-controller@2644 {
324				compatible = "brcm,bcm4908-misc-pcie-reset";
325				reg = <0x44 0x04>;
326				#reset-cells = <1>;
327			};
328		};
329
330		reboot {
331			compatible = "syscon-reboot";
332			regmap = <&timer>;
333			offset = <0x34>;
334			mask = <1>;
335		};
336	};
337};
338