1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2 3#include <dt-bindings/gpio/gpio.h> 4#include <dt-bindings/input/input.h> 5#include <dt-bindings/leds/common.h> 6 7#include "bcm4906.dtsi" 8 9/ { 10 compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908"; 11 model = "TP-Link Archer C2300 V1"; 12 13 memory@0 { 14 device_type = "memory"; 15 reg = <0x00 0x00 0x00 0x20000000>; 16 }; 17 18 leds { 19 compatible = "gpio-leds"; 20 21 led-power { 22 function = LED_FUNCTION_POWER; 23 color = <LED_COLOR_ID_BLUE>; 24 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; 25 }; 26 27 led-2ghz { 28 function = "2ghz"; 29 color = <LED_COLOR_ID_BLUE>; 30 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; 31 }; 32 33 led-5ghz { 34 function = "5ghz"; 35 color = <LED_COLOR_ID_BLUE>; 36 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; 37 }; 38 39 led-wan-amber { 40 function = LED_FUNCTION_WAN; 41 color = <LED_COLOR_ID_AMBER>; 42 gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; 43 }; 44 45 led-wan-blue { 46 function = LED_FUNCTION_WAN; 47 color = <LED_COLOR_ID_BLUE>; 48 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; 49 }; 50 51 led-lan { 52 function = LED_FUNCTION_LAN; 53 color = <LED_COLOR_ID_BLUE>; 54 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; 55 }; 56 57 led-wps { 58 function = LED_FUNCTION_WPS; 59 color = <LED_COLOR_ID_BLUE>; 60 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; 61 }; 62 63 led-usb2 { 64 function = "usb2"; 65 color = <LED_COLOR_ID_BLUE>; 66 gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; 67 }; 68 69 led-usb3 { 70 function = "usbd3"; 71 color = <LED_COLOR_ID_BLUE>; 72 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; 73 }; 74 75 led-brightness { 76 function = LED_FUNCTION_BACKLIGHT; 77 color = <LED_COLOR_ID_WHITE>; 78 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; 79 }; 80 }; 81 82 gpio-keys-polled { 83 compatible = "gpio-keys-polled"; 84 poll-interval = <100>; 85 86 brightness { 87 label = "LEDs"; 88 linux,code = <KEY_BRIGHTNESS_ZERO>; 89 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; 90 }; 91 92 wps { 93 label = "WPS"; 94 linux,code = <KEY_WPS_BUTTON>; 95 gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; 96 }; 97 98 wifi { 99 label = "WiFi"; 100 linux,code = <KEY_RFKILL>; 101 gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; 102 }; 103 104 restart { 105 label = "Reset"; 106 linux,code = <KEY_RESTART>; 107 gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; 108 }; 109 }; 110}; 111 112&usb_phy { 113 brcm,ioc = <1>; 114 status = "okay"; 115}; 116 117&ehci { 118 status = "okay"; 119}; 120 121&ohci { 122 status = "okay"; 123}; 124 125&xhci { 126 status = "okay"; 127}; 128 129&ports { 130 port@0 { 131 label = "lan4"; 132 }; 133 134 port@1 { 135 label = "lan3"; 136 }; 137 138 port@2 { 139 label = "lan2"; 140 }; 141 142 port@3 { 143 label = "lan1"; 144 }; 145 146 port@7 { 147 reg = <7>; 148 phy-mode = "internal"; 149 phy-handle = <&phy12>; 150 label = "wan"; 151 }; 152}; 153 154&nandcs { 155 nand-ecc-strength = <4>; 156 nand-ecc-step-size = <512>; 157 nand-on-flash-bbt; 158 159 #address-cells = <1>; 160 #size-cells = <0>; 161 162 partitions { 163 compatible = "brcm,bcm4908-partitions"; 164 #address-cells = <1>; 165 #size-cells = <1>; 166 167 partition@0 { 168 label = "cferom"; 169 reg = <0x0 0x100000>; 170 }; 171 172 partition@100000 { 173 compatible = "brcm,bcm4908-firmware"; 174 reg = <0x100000 0x3900000>; 175 }; 176 177 partition@5800000 { 178 compatible = "brcm,bcm4908-firmware"; 179 reg = <0x3a00000 0x3900000>; 180 }; 181 }; 182}; 183