1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2 3#include <dt-bindings/gpio/gpio.h> 4#include <dt-bindings/input/input.h> 5#include <dt-bindings/leds/common.h> 6 7#include "bcm4906.dtsi" 8 9/ { 10 compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908"; 11 model = "Netgear R8000P"; 12 13 memory@0 { 14 device_type = "memory"; 15 reg = <0x00 0x00 0x00 0x20000000>; 16 }; 17 18 leds { 19 compatible = "gpio-leds"; 20 21 led-power-white { 22 function = LED_FUNCTION_POWER; 23 color = <LED_COLOR_ID_WHITE>; 24 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; 25 }; 26 27 led-power-amber { 28 function = LED_FUNCTION_POWER; 29 color = <LED_COLOR_ID_AMBER>; 30 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; 31 }; 32 33 led-wps { 34 function = LED_FUNCTION_WPS; 35 color = <LED_COLOR_ID_WHITE>; 36 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; 37 }; 38 39 led-2ghz { 40 function = "2ghz"; 41 color = <LED_COLOR_ID_WHITE>; 42 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; 43 }; 44 45 led-5ghz-1 { 46 function = "5ghz-1"; 47 color = <LED_COLOR_ID_WHITE>; 48 gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; 49 }; 50 51 led-5ghz-2 { 52 function = "5ghz-2"; 53 color = <LED_COLOR_ID_WHITE>; 54 gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; 55 }; 56 57 led-usb2 { 58 function = "usb2"; 59 color = <LED_COLOR_ID_WHITE>; 60 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; 61 }; 62 63 led-usb3 { 64 function = "usb3"; 65 color = <LED_COLOR_ID_WHITE>; 66 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; 67 }; 68 69 led-wifi { 70 function = "wifi"; 71 color = <LED_COLOR_ID_WHITE>; 72 gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; 73 }; 74 }; 75}; 76 77&enet { 78 nvmem-cells = <&base_mac_addr>; 79 nvmem-cell-names = "mac-address"; 80}; 81 82&usb_phy { 83 brcm,ioc = <1>; 84 status = "okay"; 85}; 86 87&ehci { 88 status = "okay"; 89}; 90 91&ohci { 92 status = "okay"; 93}; 94 95&xhci { 96 status = "okay"; 97}; 98 99&ports { 100 port@0 { 101 label = "lan4"; 102 }; 103 104 port@1 { 105 label = "lan3"; 106 }; 107 108 port@2 { 109 label = "lan2"; 110 }; 111 112 port@3 { 113 label = "lan1"; 114 }; 115 116 port@7 { 117 reg = <7>; 118 phy-mode = "internal"; 119 phy-handle = <&phy12>; 120 label = "wan"; 121 }; 122}; 123 124&nandcs { 125 nand-ecc-strength = <4>; 126 nand-ecc-step-size = <512>; 127 nand-on-flash-bbt; 128 129 #address-cells = <1>; 130 #size-cells = <0>; 131 132 partitions { 133 compatible = "fixed-partitions"; 134 #address-cells = <1>; 135 #size-cells = <1>; 136 137 partition@0 { 138 compatible = "nvmem-cells"; 139 label = "cferom"; 140 reg = <0x0 0x100000>; 141 142 #address-cells = <1>; 143 #size-cells = <1>; 144 ranges = <0 0x0 0x100000>; 145 146 base_mac_addr: mac@106a0 { 147 reg = <0x106a0 0x6>; 148 }; 149 }; 150 151 partition@100000 { 152 compatible = "brcm,bcm4908-firmware"; 153 label = "firmware"; 154 reg = <0x100000 0x4400000>; 155 }; 156 }; 157}; 158