1// SPDX-License-Identifier: GPL-2.0 2/* 3 * ARM Ltd. Fast Models 4 * 5 * Versatile Express (VE) system model 6 * Motherboard component 7 * 8 * VEMotherBoard.lisa 9 */ 10/ { 11 v2m_clk24mhz: clk24mhz { 12 compatible = "fixed-clock"; 13 #clock-cells = <0>; 14 clock-frequency = <24000000>; 15 clock-output-names = "v2m:clk24mhz"; 16 }; 17 18 v2m_refclk1mhz: refclk1mhz { 19 compatible = "fixed-clock"; 20 #clock-cells = <0>; 21 clock-frequency = <1000000>; 22 clock-output-names = "v2m:refclk1mhz"; 23 }; 24 25 v2m_refclk32khz: refclk32khz { 26 compatible = "fixed-clock"; 27 #clock-cells = <0>; 28 clock-frequency = <32768>; 29 clock-output-names = "v2m:refclk32khz"; 30 }; 31 32 v2m_fixed_3v3: v2m-3v3 { 33 compatible = "regulator-fixed"; 34 regulator-name = "3V3"; 35 regulator-min-microvolt = <3300000>; 36 regulator-max-microvolt = <3300000>; 37 regulator-always-on; 38 }; 39 40 mcc { 41 compatible = "arm,vexpress,config-bus"; 42 arm,vexpress,config-bridge = <&v2m_sysreg>; 43 44 v2m_oscclk1: oscclk1 { 45 /* CLCD clock */ 46 compatible = "arm,vexpress-osc"; 47 arm,vexpress-sysreg,func = <1 1>; 48 freq-range = <23750000 63500000>; 49 #clock-cells = <0>; 50 clock-output-names = "v2m:oscclk1"; 51 }; 52 53 reset { 54 compatible = "arm,vexpress-reset"; 55 arm,vexpress-sysreg,func = <5 0>; 56 }; 57 58 muxfpga { 59 compatible = "arm,vexpress-muxfpga"; 60 arm,vexpress-sysreg,func = <7 0>; 61 }; 62 63 shutdown { 64 compatible = "arm,vexpress-shutdown"; 65 arm,vexpress-sysreg,func = <8 0>; 66 }; 67 68 reboot { 69 compatible = "arm,vexpress-reboot"; 70 arm,vexpress-sysreg,func = <9 0>; 71 }; 72 73 dvimode { 74 compatible = "arm,vexpress-dvimode"; 75 arm,vexpress-sysreg,func = <11 0>; 76 }; 77 }; 78 79 bus@8000000 { 80 motherboard-bus { 81 arm,v2m-memory-map = "rs1"; 82 compatible = "arm,vexpress,v2m-p1", "simple-bus"; 83 #address-cells = <2>; /* SMB chipselect number and offset */ 84 #size-cells = <1>; 85 #interrupt-cells = <1>; 86 ranges; 87 88 flash@0 { 89 compatible = "arm,vexpress-flash", "cfi-flash"; 90 reg = <0 0x00000000 0x04000000>, 91 <4 0x00000000 0x04000000>; 92 bank-width = <4>; 93 }; 94 95 ethernet@202000000 { 96 compatible = "smsc,lan91c111"; 97 reg = <2 0x02000000 0x10000>; 98 interrupts = <15>; 99 }; 100 101 iofpga-bus@300000000 { 102 compatible = "simple-bus"; 103 #address-cells = <1>; 104 #size-cells = <1>; 105 ranges = <0 3 0 0x200000>; 106 107 v2m_sysreg: sysreg@10000 { 108 compatible = "arm,vexpress-sysreg"; 109 reg = <0x010000 0x1000>; 110 gpio-controller; 111 #gpio-cells = <2>; 112 }; 113 114 v2m_sysctl: sysctl@20000 { 115 compatible = "arm,sp810", "arm,primecell"; 116 reg = <0x020000 0x1000>; 117 clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; 118 clock-names = "refclk", "timclk", "apb_pclk"; 119 #clock-cells = <1>; 120 clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; 121 assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; 122 assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; 123 }; 124 125 aaci@40000 { 126 compatible = "arm,pl041", "arm,primecell"; 127 reg = <0x040000 0x1000>; 128 interrupts = <11>; 129 clocks = <&v2m_clk24mhz>; 130 clock-names = "apb_pclk"; 131 }; 132 133 mmci@50000 { 134 compatible = "arm,pl180", "arm,primecell"; 135 reg = <0x050000 0x1000>; 136 interrupts = <9>, <10>; 137 cd-gpios = <&v2m_sysreg 0 0>; 138 wp-gpios = <&v2m_sysreg 1 0>; 139 max-frequency = <12000000>; 140 vmmc-supply = <&v2m_fixed_3v3>; 141 clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; 142 clock-names = "mclk", "apb_pclk"; 143 }; 144 145 kmi@60000 { 146 compatible = "arm,pl050", "arm,primecell"; 147 reg = <0x060000 0x1000>; 148 interrupts = <12>; 149 clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; 150 clock-names = "KMIREFCLK", "apb_pclk"; 151 }; 152 153 kmi@70000 { 154 compatible = "arm,pl050", "arm,primecell"; 155 reg = <0x070000 0x1000>; 156 interrupts = <13>; 157 clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; 158 clock-names = "KMIREFCLK", "apb_pclk"; 159 }; 160 161 v2m_serial0: serial@90000 { 162 compatible = "arm,pl011", "arm,primecell"; 163 reg = <0x090000 0x1000>; 164 interrupts = <5>; 165 clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; 166 clock-names = "uartclk", "apb_pclk"; 167 }; 168 169 v2m_serial1: serial@a0000 { 170 compatible = "arm,pl011", "arm,primecell"; 171 reg = <0x0a0000 0x1000>; 172 interrupts = <6>; 173 clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; 174 clock-names = "uartclk", "apb_pclk"; 175 }; 176 177 v2m_serial2: serial@b0000 { 178 compatible = "arm,pl011", "arm,primecell"; 179 reg = <0x0b0000 0x1000>; 180 interrupts = <7>; 181 clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; 182 clock-names = "uartclk", "apb_pclk"; 183 }; 184 185 v2m_serial3: serial@c0000 { 186 compatible = "arm,pl011", "arm,primecell"; 187 reg = <0x0c0000 0x1000>; 188 interrupts = <8>; 189 clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; 190 clock-names = "uartclk", "apb_pclk"; 191 }; 192 193 wdt@f0000 { 194 compatible = "arm,sp805", "arm,primecell"; 195 reg = <0x0f0000 0x1000>; 196 interrupts = <0>; 197 clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; 198 clock-names = "wdog_clk", "apb_pclk"; 199 }; 200 201 v2m_timer01: timer@110000 { 202 compatible = "arm,sp804", "arm,primecell"; 203 reg = <0x110000 0x1000>; 204 interrupts = <2>; 205 clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>; 206 clock-names = "timclken1", "timclken2", "apb_pclk"; 207 }; 208 209 v2m_timer23: timer@120000 { 210 compatible = "arm,sp804", "arm,primecell"; 211 reg = <0x120000 0x1000>; 212 interrupts = <3>; 213 clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>; 214 clock-names = "timclken1", "timclken2", "apb_pclk"; 215 }; 216 217 virtio-block@130000 { 218 compatible = "virtio,mmio"; 219 reg = <0x130000 0x200>; 220 interrupts = <42>; 221 }; 222 223 rtc@170000 { 224 compatible = "arm,pl031", "arm,primecell"; 225 reg = <0x170000 0x1000>; 226 interrupts = <4>; 227 clocks = <&v2m_clk24mhz>; 228 clock-names = "apb_pclk"; 229 }; 230 231 clcd@1f0000 { 232 compatible = "arm,pl111", "arm,primecell"; 233 reg = <0x1f0000 0x1000>; 234 interrupt-names = "combined"; 235 interrupts = <14>; 236 clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; 237 clock-names = "clcdclk", "apb_pclk"; 238 memory-region = <&vram>; 239 240 port { 241 clcd_pads: endpoint { 242 remote-endpoint = <&panel_in>; 243 arm,pl11x,tft-r0g0b0-pads = <0 8 16>; 244 }; 245 }; 246 }; 247 }; 248 }; 249 }; 250}; 251