xref: /freebsd/sys/contrib/device-tree/src/arm64/amlogic/meson-gxl.dtsi (revision b077aed33b7b6aefca7b17ddb250cf521f938613) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2016 Endless Computers, Inc.
4 * Author: Carlo Caione <carlo@endlessm.com>
5 */
6
7#include "meson-gx.dtsi"
8#include <dt-bindings/clock/gxbb-clkc.h>
9#include <dt-bindings/clock/gxbb-aoclkc.h>
10#include <dt-bindings/gpio/meson-gxl-gpio.h>
11#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
12
13/ {
14	compatible = "amlogic,meson-gxl";
15
16	soc {
17		usb: usb@d0078080 {
18			compatible = "amlogic,meson-gxl-usb-ctrl";
19			reg = <0x0 0xd0078080 0x0 0x20>;
20			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
21			#address-cells = <2>;
22			#size-cells = <2>;
23			ranges;
24
25			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
26			clock-names = "usb_ctrl", "ddr";
27			resets = <&reset RESET_USB_OTG>;
28
29			dr_mode = "otg";
30
31			phys = <&usb2_phy0>, <&usb2_phy1>;
32			phy-names = "usb2-phy0", "usb2-phy1";
33
34			dwc2: usb@c9100000 {
35				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
36				reg = <0x0 0xc9100000 0x0 0x40000>;
37				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
38				clocks = <&clkc CLKID_USB1>;
39				clock-names = "otg";
40				phys = <&usb2_phy1>;
41				dr_mode = "peripheral";
42				g-rx-fifo-size = <192>;
43				g-np-tx-fifo-size = <128>;
44				g-tx-fifo-size = <128 128 16 16 16>;
45			};
46
47			dwc3: usb@c9000000 {
48				compatible = "snps,dwc3";
49				reg = <0x0 0xc9000000 0x0 0x100000>;
50				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
51				dr_mode = "host";
52				maximum-speed = "high-speed";
53				snps,dis_u2_susphy_quirk;
54			};
55		};
56
57		acodec: audio-controller@c8832000 {
58			compatible = "amlogic,t9015";
59			reg = <0x0 0xc8832000 0x0 0x14>;
60			#sound-dai-cells = <0>;
61			sound-name-prefix = "ACODEC";
62			clocks = <&clkc CLKID_ACODEC>;
63			clock-names = "pclk";
64			resets = <&reset RESET_ACODEC>;
65			status = "disabled";
66		};
67
68		crypto: crypto@c883e000 {
69			compatible = "amlogic,gxl-crypto";
70			reg = <0x0 0xc883e000 0x0 0x36>;
71			interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
72				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
73			clocks = <&clkc CLKID_BLKMV>;
74			clock-names = "blkmv";
75			status = "okay";
76		};
77	};
78};
79
80&aiu {
81	compatible = "amlogic,aiu-gxl", "amlogic,aiu";
82	clocks = <&clkc CLKID_AIU_GLUE>,
83		 <&clkc CLKID_I2S_OUT>,
84		 <&clkc CLKID_AOCLK_GATE>,
85		 <&clkc CLKID_CTS_AMCLK>,
86		 <&clkc CLKID_MIXER_IFACE>,
87		 <&clkc CLKID_IEC958>,
88		 <&clkc CLKID_IEC958_GATE>,
89		 <&clkc CLKID_CTS_MCLK_I958>,
90		 <&clkc CLKID_CTS_I958>;
91	clock-names = "pclk",
92		      "i2s_pclk",
93		      "i2s_aoclk",
94		      "i2s_mclk",
95		      "i2s_mixer",
96		      "spdif_pclk",
97		      "spdif_aoclk",
98		      "spdif_mclk",
99		      "spdif_mclk_sel";
100	resets = <&reset RESET_AIU>;
101};
102
103&apb {
104	usb2_phy0: phy@78000 {
105		compatible = "amlogic,meson-gxl-usb2-phy";
106		#phy-cells = <0>;
107		reg = <0x0 0x78000 0x0 0x20>;
108		clocks = <&clkc CLKID_USB>;
109		clock-names = "phy";
110		resets = <&reset RESET_USB_OTG>;
111		reset-names = "phy";
112		status = "okay";
113	};
114
115	usb2_phy1: phy@78020 {
116		compatible = "amlogic,meson-gxl-usb2-phy";
117		#phy-cells = <0>;
118		reg = <0x0 0x78020 0x0 0x20>;
119		clocks = <&clkc CLKID_USB>;
120		clock-names = "phy";
121		resets = <&reset RESET_USB_OTG>;
122		reset-names = "phy";
123		status = "okay";
124	};
125};
126
127&efuse {
128	clocks = <&clkc CLKID_EFUSE>;
129};
130
131&ethmac {
132	clocks = <&clkc CLKID_ETH>,
133		 <&clkc CLKID_FCLK_DIV2>,
134		 <&clkc CLKID_MPLL2>,
135		 <&clkc CLKID_FCLK_DIV2>;
136	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
137
138	mdio0: mdio {
139		#address-cells = <1>;
140		#size-cells = <0>;
141		compatible = "snps,dwmac-mdio";
142	};
143};
144
145&aobus {
146	pinctrl_aobus: pinctrl@14 {
147		compatible = "amlogic,meson-gxl-aobus-pinctrl";
148		#address-cells = <2>;
149		#size-cells = <2>;
150		ranges;
151
152		gpio_ao: bank@14 {
153			reg = <0x0 0x00014 0x0 0x8>,
154			      <0x0 0x0002c 0x0 0x4>,
155			      <0x0 0x00024 0x0 0x8>;
156			reg-names = "mux", "pull", "gpio";
157			gpio-controller;
158			#gpio-cells = <2>;
159			gpio-ranges = <&pinctrl_aobus 0 0 14>;
160		};
161
162		uart_ao_a_pins: uart_ao_a {
163			mux {
164				groups = "uart_tx_ao_a", "uart_rx_ao_a";
165				function = "uart_ao";
166				bias-disable;
167			};
168		};
169
170		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
171			mux {
172				groups = "uart_cts_ao_a",
173				       "uart_rts_ao_a";
174				function = "uart_ao";
175				bias-disable;
176			};
177		};
178
179		uart_ao_b_pins: uart_ao_b {
180			mux {
181				groups = "uart_tx_ao_b", "uart_rx_ao_b";
182				function = "uart_ao_b";
183				bias-disable;
184			};
185		};
186
187		uart_ao_b_0_1_pins: uart_ao_b_0_1 {
188			mux {
189				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
190				function = "uart_ao_b";
191				bias-disable;
192			};
193		};
194
195		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
196			mux {
197				groups = "uart_cts_ao_b",
198				       "uart_rts_ao_b";
199				function = "uart_ao_b";
200				bias-disable;
201			};
202		};
203
204		remote_input_ao_pins: remote_input_ao {
205			mux {
206				groups = "remote_input_ao";
207				function = "remote_input_ao";
208				bias-disable;
209			};
210		};
211
212		i2c_ao_pins: i2c_ao {
213			mux {
214				groups = "i2c_sck_ao",
215				       "i2c_sda_ao";
216				function = "i2c_ao";
217				bias-disable;
218			};
219		};
220
221		pwm_ao_a_3_pins: pwm_ao_a_3 {
222			mux {
223				groups = "pwm_ao_a_3";
224				function = "pwm_ao_a";
225				bias-disable;
226			};
227		};
228
229		pwm_ao_a_8_pins: pwm_ao_a_8 {
230			mux {
231				groups = "pwm_ao_a_8";
232				function = "pwm_ao_a";
233				bias-disable;
234			};
235		};
236
237		pwm_ao_b_pins: pwm_ao_b {
238			mux {
239				groups = "pwm_ao_b";
240				function = "pwm_ao_b";
241				bias-disable;
242			};
243		};
244
245		pwm_ao_b_6_pins: pwm_ao_b_6 {
246			mux {
247				groups = "pwm_ao_b_6";
248				function = "pwm_ao_b";
249				bias-disable;
250			};
251		};
252
253		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
254			mux {
255				groups = "i2s_out_ch23_ao";
256				function = "i2s_out_ao";
257				bias-disable;
258			};
259		};
260
261		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
262			mux {
263				groups = "i2s_out_ch45_ao";
264				function = "i2s_out_ao";
265				bias-disable;
266			};
267		};
268
269		spdif_out_ao_6_pins: spdif_out_ao_6 {
270			mux {
271				groups = "spdif_out_ao_6";
272				function = "spdif_out_ao";
273				bias-disable;
274			};
275		};
276
277		spdif_out_ao_9_pins: spdif_out_ao_9 {
278			mux {
279				groups = "spdif_out_ao_9";
280				function = "spdif_out_ao";
281				bias-disable;
282			};
283		};
284
285		ao_cec_pins: ao_cec {
286			mux {
287				groups = "ao_cec";
288				function = "cec_ao";
289				bias-disable;
290			};
291		};
292
293		ee_cec_pins: ee_cec {
294			mux {
295				groups = "ee_cec";
296				function = "cec_ao";
297				bias-disable;
298			};
299		};
300	};
301};
302
303&cec_AO {
304	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
305	clock-names = "core";
306};
307
308&clkc_AO {
309	compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
310	clocks = <&xtal>, <&clkc CLKID_CLK81>;
311	clock-names = "xtal", "mpeg-clk";
312};
313
314&gpio_intc {
315	compatible = "amlogic,meson-gpio-intc",
316		     "amlogic,meson-gxl-gpio-intc";
317	status = "okay";
318};
319
320&hdmi_tx {
321	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
322	resets = <&reset RESET_HDMITX_CAPB3>,
323		 <&reset RESET_HDMI_SYSTEM_RESET>,
324		 <&reset RESET_HDMI_TX>;
325	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
326	clocks = <&clkc CLKID_HDMI_PCLK>,
327		 <&clkc CLKID_CLK81>,
328		 <&clkc CLKID_GCLK_VENCI_INT0>;
329	clock-names = "isfr", "iahb", "venci";
330};
331
332&sysctrl {
333	clkc: clock-controller {
334		compatible = "amlogic,gxl-clkc";
335		#clock-cells = <1>;
336		clocks = <&xtal>;
337		clock-names = "xtal";
338	};
339};
340
341&hwrng {
342	clocks = <&clkc CLKID_RNG0>;
343	clock-names = "core";
344};
345
346&i2c_A {
347	clocks = <&clkc CLKID_I2C>;
348};
349
350&i2c_AO {
351	clocks = <&clkc CLKID_AO_I2C>;
352};
353
354&i2c_B {
355	clocks = <&clkc CLKID_I2C>;
356};
357
358&i2c_C {
359	clocks = <&clkc CLKID_I2C>;
360};
361
362&periphs {
363	pinctrl_periphs: pinctrl@4b0 {
364		compatible = "amlogic,meson-gxl-periphs-pinctrl";
365		#address-cells = <2>;
366		#size-cells = <2>;
367		ranges;
368
369		gpio: bank@4b0 {
370			reg = <0x0 0x004b0 0x0 0x28>,
371			      <0x0 0x004e8 0x0 0x14>,
372			      <0x0 0x00520 0x0 0x14>,
373			      <0x0 0x00430 0x0 0x40>;
374			reg-names = "mux", "pull", "pull-enable", "gpio";
375			gpio-controller;
376			#gpio-cells = <2>;
377			gpio-ranges = <&pinctrl_periphs 0 0 100>;
378		};
379
380		emmc_pins: emmc {
381			mux-0 {
382				groups = "emmc_nand_d07",
383				       "emmc_cmd";
384				function = "emmc";
385				bias-pull-up;
386			};
387
388			mux-1 {
389				groups = "emmc_clk";
390				function = "emmc";
391				bias-disable;
392			};
393		};
394
395		emmc_ds_pins: emmc-ds {
396			mux {
397				groups = "emmc_ds";
398				function = "emmc";
399				bias-pull-down;
400			};
401		};
402
403		emmc_clk_gate_pins: emmc_clk_gate {
404			mux {
405				groups = "BOOT_8";
406				function = "gpio_periphs";
407				bias-pull-down;
408			};
409		};
410
411		nor_pins: nor {
412			mux {
413				groups = "nor_d",
414				       "nor_q",
415				       "nor_c",
416				       "nor_cs";
417				function = "nor";
418				bias-disable;
419			};
420		};
421
422		spi_pins: spi-pins {
423			mux {
424				groups = "spi_miso",
425					"spi_mosi",
426					"spi_sclk";
427				function = "spi";
428				bias-disable;
429			};
430		};
431
432		spi_ss0_pins: spi-ss0 {
433			mux {
434				groups = "spi_ss0";
435				function = "spi";
436				bias-disable;
437			};
438		};
439
440		sdcard_pins: sdcard {
441			mux-0 {
442				groups = "sdcard_d0",
443				       "sdcard_d1",
444				       "sdcard_d2",
445				       "sdcard_d3",
446				       "sdcard_cmd";
447				function = "sdcard";
448				bias-pull-up;
449			};
450
451			mux-1 {
452				groups = "sdcard_clk";
453				function = "sdcard";
454				bias-disable;
455			};
456		};
457
458		sdcard_clk_gate_pins: sdcard_clk_gate {
459			mux {
460				groups = "CARD_2";
461				function = "gpio_periphs";
462				bias-pull-down;
463			};
464		};
465
466		sdio_pins: sdio {
467			mux-0 {
468				groups = "sdio_d0",
469				       "sdio_d1",
470				       "sdio_d2",
471				       "sdio_d3",
472				       "sdio_cmd";
473				function = "sdio";
474				bias-pull-up;
475			};
476
477			mux-1 {
478				groups = "sdio_clk";
479				function = "sdio";
480				bias-disable;
481			};
482		};
483
484		sdio_clk_gate_pins: sdio_clk_gate {
485			mux {
486				groups = "GPIOX_4";
487				function = "gpio_periphs";
488				bias-pull-down;
489			};
490		};
491
492		sdio_irq_pins: sdio_irq {
493			mux {
494				groups = "sdio_irq";
495				function = "sdio";
496				bias-disable;
497			};
498		};
499
500		uart_a_pins: uart_a {
501			mux {
502				groups = "uart_tx_a",
503				       "uart_rx_a";
504				function = "uart_a";
505				bias-disable;
506			};
507		};
508
509		uart_a_cts_rts_pins: uart_a_cts_rts {
510			mux {
511				groups = "uart_cts_a",
512				       "uart_rts_a";
513				function = "uart_a";
514				bias-disable;
515			};
516		};
517
518		uart_b_pins: uart_b {
519			mux {
520				groups = "uart_tx_b",
521				       "uart_rx_b";
522				function = "uart_b";
523				bias-disable;
524			};
525		};
526
527		uart_b_cts_rts_pins: uart_b_cts_rts {
528			mux {
529				groups = "uart_cts_b",
530				       "uart_rts_b";
531				function = "uart_b";
532				bias-disable;
533			};
534		};
535
536		uart_c_pins: uart_c {
537			mux {
538				groups = "uart_tx_c",
539				       "uart_rx_c";
540				function = "uart_c";
541				bias-disable;
542			};
543		};
544
545		uart_c_cts_rts_pins: uart_c_cts_rts {
546			mux {
547				groups = "uart_cts_c",
548				       "uart_rts_c";
549				function = "uart_c";
550				bias-disable;
551			};
552		};
553
554		i2c_a_pins: i2c_a {
555			mux {
556				groups = "i2c_sck_a",
557				     "i2c_sda_a";
558				function = "i2c_a";
559				bias-disable;
560			};
561		};
562
563		i2c_b_pins: i2c_b {
564			mux {
565				groups = "i2c_sck_b",
566				      "i2c_sda_b";
567				function = "i2c_b";
568				bias-disable;
569			};
570		};
571
572		i2c_c_pins: i2c_c {
573			mux {
574				groups = "i2c_sck_c",
575				      "i2c_sda_c";
576				function = "i2c_c";
577				bias-disable;
578			};
579		};
580
581		i2c_c_dv18_pins: i2c_c_dv18 {
582			mux {
583				groups = "i2c_sck_c_dv19",
584				      "i2c_sda_c_dv18";
585				function = "i2c_c";
586				bias-disable;
587			};
588		};
589
590		eth_pins: eth_c {
591			mux {
592				groups = "eth_mdio",
593				       "eth_mdc",
594				       "eth_clk_rx_clk",
595				       "eth_rx_dv",
596				       "eth_rxd0",
597				       "eth_rxd1",
598				       "eth_rxd2",
599				       "eth_rxd3",
600				       "eth_rgmii_tx_clk",
601				       "eth_tx_en",
602				       "eth_txd0",
603				       "eth_txd1",
604				       "eth_txd2",
605				       "eth_txd3";
606				function = "eth";
607				bias-disable;
608			};
609		};
610
611		eth_link_led_pins: eth_link_led {
612			mux {
613				groups = "eth_link_led";
614				function = "eth_led";
615				bias-disable;
616			};
617		};
618
619		eth_act_led_pins: eth_act_led {
620			mux {
621				groups = "eth_act_led";
622				function = "eth_led";
623			};
624		};
625
626		pwm_a_pins: pwm_a {
627			mux {
628				groups = "pwm_a";
629				function = "pwm_a";
630				bias-disable;
631			};
632		};
633
634		pwm_b_pins: pwm_b {
635			mux {
636				groups = "pwm_b";
637				function = "pwm_b";
638				bias-disable;
639			};
640		};
641
642		pwm_c_pins: pwm_c {
643			mux {
644				groups = "pwm_c";
645				function = "pwm_c";
646				bias-disable;
647			};
648		};
649
650		pwm_d_pins: pwm_d {
651			mux {
652				groups = "pwm_d";
653				function = "pwm_d";
654				bias-disable;
655			};
656		};
657
658		pwm_e_pins: pwm_e {
659			mux {
660				groups = "pwm_e";
661				function = "pwm_e";
662				bias-disable;
663			};
664		};
665
666		pwm_f_clk_pins: pwm_f_clk {
667			mux {
668				groups = "pwm_f_clk";
669				function = "pwm_f";
670				bias-disable;
671			};
672		};
673
674		pwm_f_x_pins: pwm_f_x {
675			mux {
676				groups = "pwm_f_x";
677				function = "pwm_f";
678				bias-disable;
679			};
680		};
681
682		hdmi_hpd_pins: hdmi_hpd {
683			mux {
684				groups = "hdmi_hpd";
685				function = "hdmi_hpd";
686				bias-disable;
687			};
688		};
689
690		hdmi_i2c_pins: hdmi_i2c {
691			mux {
692				groups = "hdmi_sda", "hdmi_scl";
693				function = "hdmi_i2c";
694				bias-disable;
695			};
696		};
697
698		i2s_am_clk_pins: i2s_am_clk {
699			mux {
700				groups = "i2s_am_clk";
701				function = "i2s_out";
702				bias-disable;
703			};
704		};
705
706		i2s_out_ao_clk_pins: i2s_out_ao_clk {
707			mux {
708				groups = "i2s_out_ao_clk";
709				function = "i2s_out";
710				bias-disable;
711			};
712		};
713
714		i2s_out_lr_clk_pins: i2s_out_lr_clk {
715			mux {
716				groups = "i2s_out_lr_clk";
717				function = "i2s_out";
718				bias-disable;
719			};
720		};
721
722		i2s_out_ch01_pins: i2s_out_ch01 {
723			mux {
724				groups = "i2s_out_ch01";
725				function = "i2s_out";
726				bias-disable;
727			};
728		};
729		i2sout_ch23_z_pins: i2sout_ch23_z {
730			mux {
731				groups = "i2sout_ch23_z";
732				function = "i2s_out";
733				bias-disable;
734			};
735		};
736
737		i2sout_ch45_z_pins: i2sout_ch45_z {
738			mux {
739				groups = "i2sout_ch45_z";
740				function = "i2s_out";
741				bias-disable;
742			};
743		};
744
745		i2sout_ch67_z_pins: i2sout_ch67_z {
746			mux {
747				groups = "i2sout_ch67_z";
748				function = "i2s_out";
749				bias-disable;
750			};
751		};
752
753		spdif_out_h_pins: spdif_out_ao_h {
754			mux {
755				groups = "spdif_out_h";
756				function = "spdif_out";
757				bias-disable;
758			};
759		};
760	};
761
762	eth-phy-mux {
763		compatible = "mdio-mux-mmioreg", "mdio-mux";
764		#address-cells = <1>;
765		#size-cells = <0>;
766		reg = <0x0 0x55c 0x0 0x4>;
767		mux-mask = <0xffffffff>;
768		mdio-parent-bus = <&mdio0>;
769
770		internal_mdio: mdio@e40908ff {
771			reg = <0xe40908ff>;
772			#address-cells = <1>;
773			#size-cells = <0>;
774
775			internal_phy: ethernet-phy@8 {
776				compatible = "ethernet-phy-id0181.4400";
777				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
778				reg = <8>;
779				max-speed = <100>;
780			};
781		};
782
783		external_mdio: mdio@2009087f {
784			reg = <0x2009087f>;
785			#address-cells = <1>;
786			#size-cells = <0>;
787		};
788	};
789};
790
791&pwrc {
792	resets = <&reset RESET_VIU>,
793		 <&reset RESET_VENC>,
794		 <&reset RESET_VCBUS>,
795		 <&reset RESET_BT656>,
796		 <&reset RESET_DVIN_RESET>,
797		 <&reset RESET_RDMA>,
798		 <&reset RESET_VENCI>,
799		 <&reset RESET_VENCP>,
800		 <&reset RESET_VDAC>,
801		 <&reset RESET_VDI6>,
802		 <&reset RESET_VENCL>,
803		 <&reset RESET_VID_LOCK>;
804	reset-names = "viu", "venc", "vcbus", "bt656",
805		      "dvin", "rdma", "venci", "vencp",
806		      "vdac", "vdi6", "vencl", "vid_lock";
807	clocks = <&clkc CLKID_VPU>,
808	         <&clkc CLKID_VAPB>;
809	clock-names = "vpu", "vapb";
810	/*
811	 * VPU clocking is provided by two identical clock paths
812	 * VPU_0 and VPU_1 muxed to a single clock by a glitch
813	 * free mux to safely change frequency while running.
814	 * Same for VAPB but with a final gate after the glitch free mux.
815	 */
816	assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
817			  <&clkc CLKID_VPU_0>,
818			  <&clkc CLKID_VPU>, /* Glitch free mux */
819			  <&clkc CLKID_VAPB_0_SEL>,
820			  <&clkc CLKID_VAPB_0>,
821			  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
822	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
823				 <0>, /* Do Nothing */
824				 <&clkc CLKID_VPU_0>,
825				 <&clkc CLKID_FCLK_DIV4>,
826				 <0>, /* Do Nothing */
827				 <&clkc CLKID_VAPB_0>;
828	assigned-clock-rates = <0>, /* Do Nothing */
829			       <666666666>,
830			       <0>, /* Do Nothing */
831			       <0>, /* Do Nothing */
832			       <250000000>,
833			       <0>; /* Do Nothing */
834};
835
836&saradc {
837	compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
838	clocks = <&xtal>,
839		 <&clkc CLKID_SAR_ADC>,
840		 <&clkc CLKID_SAR_ADC_CLK>,
841		 <&clkc CLKID_SAR_ADC_SEL>;
842	clock-names = "clkin", "core", "adc_clk", "adc_sel";
843};
844
845&sd_emmc_a {
846	clocks = <&clkc CLKID_SD_EMMC_A>,
847		 <&clkc CLKID_SD_EMMC_A_CLK0>,
848		 <&clkc CLKID_FCLK_DIV2>;
849	clock-names = "core", "clkin0", "clkin1";
850	resets = <&reset RESET_SD_EMMC_A>;
851};
852
853&sd_emmc_b {
854	clocks = <&clkc CLKID_SD_EMMC_B>,
855		 <&clkc CLKID_SD_EMMC_B_CLK0>,
856		 <&clkc CLKID_FCLK_DIV2>;
857	clock-names = "core", "clkin0", "clkin1";
858	resets = <&reset RESET_SD_EMMC_B>;
859};
860
861&sd_emmc_c {
862	clocks = <&clkc CLKID_SD_EMMC_C>,
863		 <&clkc CLKID_SD_EMMC_C_CLK0>,
864		 <&clkc CLKID_FCLK_DIV2>;
865	clock-names = "core", "clkin0", "clkin1";
866	resets = <&reset RESET_SD_EMMC_C>;
867};
868
869&simplefb_hdmi {
870	clocks = <&clkc CLKID_HDMI_PCLK>,
871		 <&clkc CLKID_CLK81>,
872		 <&clkc CLKID_GCLK_VENCI_INT0>;
873};
874
875&spicc {
876	clocks = <&clkc CLKID_SPICC>;
877	clock-names = "core";
878	resets = <&reset RESET_PERIPHS_SPICC>;
879	num-cs = <1>;
880};
881
882&spifc {
883	clocks = <&clkc CLKID_SPI>;
884};
885
886&uart_A {
887	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
888	clock-names = "xtal", "pclk", "baud";
889};
890
891&uart_AO {
892	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
893	clock-names = "xtal", "pclk", "baud";
894};
895
896&uart_AO_B {
897	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
898	clock-names = "xtal", "pclk", "baud";
899};
900
901&uart_B {
902	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
903	clock-names = "xtal", "pclk", "baud";
904};
905
906&uart_C {
907	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
908	clock-names = "xtal", "pclk", "baud";
909};
910
911&vpu {
912	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
913	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
914};
915
916&vdec {
917	compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
918	clocks = <&clkc CLKID_DOS_PARSER>,
919		 <&clkc CLKID_DOS>,
920		 <&clkc CLKID_VDEC_1>,
921		 <&clkc CLKID_VDEC_HEVC>;
922	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
923	resets = <&reset RESET_PARSER>;
924	reset-names = "esparser";
925};
926