1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Author: Christian Hewitt <christianshewitt@gmail.com> 4 */ 5 6/dts-v1/; 7 8#include "meson-gxl-s905d.dtsi" 9#include "meson-gx-p23x-q20x.dtsi" 10#include <dt-bindings/input/input.h> 11#include <dt-bindings/leds/common.h> 12 13/ { 14 compatible = "osmc,vero4k-plus", "amlogic,s905d", "amlogic,meson-gxl"; 15 model = "OSMC Vero 4K Plus"; 16 17 gpio-keys-polled { 18 compatible = "gpio-keys-polled"; 19 poll-interval = <20>; 20 21 button { 22 label = "power"; 23 linux,code = <KEY_POWER>; 24 gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; 25 }; 26 }; 27 28 leds { 29 compatible = "gpio-leds"; 30 31 led-standby { 32 color = <LED_COLOR_ID_RED>; 33 function = LED_FUNCTION_POWER; 34 gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_LOW>; 35 default-state = "off"; 36 panic-indicator; 37 }; 38 }; 39}; 40 41ðmac { 42 pinctrl-0 = <ð_pins>; 43 pinctrl-names = "default"; 44 45 phy-mode = "rgmii-txid"; 46 phy-handle = <&external_phy>; 47 48 amlogic,tx-delay-ns = <0>; 49}; 50 51&external_mdio { 52 external_phy: ethernet-phy@0 { 53 /* Realtek RTL8211F (0x001cc916) */ 54 pinctrl-0 = <ð_phy_irq_pin>; 55 pinctrl-names = "default"; 56 57 reg = <0>; 58 max-speed = <1000>; 59 60 reset-assert-us = <10000>; 61 reset-deassert-us = <80000>; 62 reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; 63 64 interrupt-parent = <&gpio_intc>; 65 interrupts = <25 IRQ_TYPE_LEVEL_LOW>; 66 }; 67}; 68 69&pinctrl_periphs { 70 /* Ensure the phy irq pin is properly configured as input */ 71 eth_phy_irq_pin: eth-phy-irq { 72 mux { 73 groups = "GPIOZ_15"; 74 function = "gpio_periphs"; 75 bias-disable; 76 output-disable; 77 }; 78 }; 79}; 80 81&sd_emmc_a { 82 brcmf: wifi@1 { 83 reg = <1>; 84 compatible = "brcm,bcm4329-fmac"; 85 }; 86}; 87 88&uart_A { 89 status = "okay"; 90 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; 91 pinctrl-names = "default"; 92 uart-has-rtscts; 93 94 bluetooth { 95 compatible = "brcm,bcm43438-bt"; 96 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; 97 max-speed = <2000000>; 98 clocks = <&wifi32k>; 99 clock-names = "lpo"; 100 }; 101}; 102 103&usb { 104 dr_mode = "host"; 105}; 106 107&usb2_phy0 { 108 /* HDMI_5V also supplies the USB VBUS */ 109 phy-supply = <&hdmi_5v>; 110}; 111 112&usb2_phy0 { 113 /* HDMI_5V also supplies the USB VBUS */ 114 phy-supply = <&hdmi_5v>; 115}; 116