xref: /freebsd/sys/contrib/device-tree/src/arm64/amlogic/meson-gxbb.dtsi (revision 6be3386466ab79a84b48429ae66244f21526d3df) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2016 Andreas Färber
4 */
5
6#include "meson-gx.dtsi"
7#include "meson-gx-mali450.dtsi"
8#include <dt-bindings/gpio/meson-gxbb-gpio.h>
9#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
10#include <dt-bindings/clock/gxbb-clkc.h>
11#include <dt-bindings/clock/gxbb-aoclkc.h>
12#include <dt-bindings/reset/gxbb-aoclkc.h>
13
14/ {
15	compatible = "amlogic,meson-gxbb";
16
17	soc {
18		usb0_phy: phy@c0000000 {
19			compatible = "amlogic,meson-gxbb-usb2-phy";
20			#phy-cells = <0>;
21			reg = <0x0 0xc0000000 0x0 0x20>;
22			resets = <&reset RESET_USB_OTG>;
23			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
24			clock-names = "usb_general", "usb";
25			status = "disabled";
26		};
27
28		usb1_phy: phy@c0000020 {
29			compatible = "amlogic,meson-gxbb-usb2-phy";
30			#phy-cells = <0>;
31			reg = <0x0 0xc0000020 0x0 0x20>;
32			resets = <&reset RESET_USB_OTG>;
33			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
34			clock-names = "usb_general", "usb";
35			status = "disabled";
36		};
37
38		usb0: usb@c9000000 {
39			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
40			reg = <0x0 0xc9000000 0x0 0x40000>;
41			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
42			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
43			clock-names = "otg";
44			phys = <&usb0_phy>;
45			phy-names = "usb2-phy";
46			dr_mode = "host";
47			status = "disabled";
48		};
49
50		usb1: usb@c9100000 {
51			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
52			reg = <0x0 0xc9100000 0x0 0x40000>;
53			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
54			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
55			clock-names = "otg";
56			phys = <&usb1_phy>;
57			phy-names = "usb2-phy";
58			dr_mode = "host";
59			status = "disabled";
60		};
61	};
62};
63
64&aiu {
65	compatible = "amlogic,aiu-gxbb", "amlogic,aiu";
66	clocks = <&clkc CLKID_AIU_GLUE>,
67		 <&clkc CLKID_I2S_OUT>,
68		 <&clkc CLKID_AOCLK_GATE>,
69		 <&clkc CLKID_CTS_AMCLK>,
70		 <&clkc CLKID_MIXER_IFACE>,
71		 <&clkc CLKID_IEC958>,
72		 <&clkc CLKID_IEC958_GATE>,
73		 <&clkc CLKID_CTS_MCLK_I958>,
74		 <&clkc CLKID_CTS_I958>;
75	clock-names = "pclk",
76		      "i2s_pclk",
77		      "i2s_aoclk",
78		      "i2s_mclk",
79		      "i2s_mixer",
80		      "spdif_pclk",
81		      "spdif_aoclk",
82		      "spdif_mclk",
83		      "spdif_mclk_sel";
84	resets = <&reset RESET_AIU>;
85};
86
87&aobus {
88	pinctrl_aobus: pinctrl@14 {
89		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
90		#address-cells = <2>;
91		#size-cells = <2>;
92		ranges;
93
94		gpio_ao: bank@14 {
95			reg = <0x0 0x00014 0x0 0x8>,
96			      <0x0 0x0002c 0x0 0x4>,
97			      <0x0 0x00024 0x0 0x8>;
98			reg-names = "mux", "pull", "gpio";
99			gpio-controller;
100			#gpio-cells = <2>;
101			gpio-ranges = <&pinctrl_aobus 0 0 14>;
102		};
103
104		uart_ao_a_pins: uart_ao_a {
105			mux {
106				groups = "uart_tx_ao_a", "uart_rx_ao_a";
107				function = "uart_ao";
108				bias-disable;
109			};
110		};
111
112		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
113			mux {
114				groups = "uart_cts_ao_a",
115				       "uart_rts_ao_a";
116				function = "uart_ao";
117				bias-disable;
118			};
119		};
120
121		uart_ao_b_pins: uart_ao_b {
122			mux {
123				groups = "uart_tx_ao_b", "uart_rx_ao_b";
124				function = "uart_ao_b";
125				bias-disable;
126			};
127		};
128
129		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
130			mux {
131				groups = "uart_cts_ao_b",
132				       "uart_rts_ao_b";
133				function = "uart_ao_b";
134				bias-disable;
135			};
136		};
137
138		remote_input_ao_pins: remote_input_ao {
139			mux {
140				groups = "remote_input_ao";
141				function = "remote_input_ao";
142				bias-disable;
143			};
144		};
145
146		i2c_ao_pins: i2c_ao {
147			mux {
148				groups = "i2c_sck_ao",
149				       "i2c_sda_ao";
150				function = "i2c_ao";
151				bias-disable;
152			};
153		};
154
155		pwm_ao_a_3_pins: pwm_ao_a_3 {
156			mux {
157				groups = "pwm_ao_a_3";
158				function = "pwm_ao_a_3";
159				bias-disable;
160			};
161		};
162
163		pwm_ao_a_6_pins: pwm_ao_a_6 {
164			mux {
165				groups = "pwm_ao_a_6";
166				function = "pwm_ao_a_6";
167				bias-disable;
168			};
169		};
170
171		pwm_ao_a_12_pins: pwm_ao_a_12 {
172			mux {
173				groups = "pwm_ao_a_12";
174				function = "pwm_ao_a_12";
175				bias-disable;
176			};
177		};
178
179		pwm_ao_b_pins: pwm_ao_b {
180			mux {
181				groups = "pwm_ao_b";
182				function = "pwm_ao_b";
183				bias-disable;
184			};
185		};
186
187		i2s_am_clk_pins: i2s_am_clk {
188			mux {
189				groups = "i2s_am_clk";
190				function = "i2s_out_ao";
191				bias-disable;
192			};
193		};
194
195		i2s_out_ao_clk_pins: i2s_out_ao_clk {
196			mux {
197				groups = "i2s_out_ao_clk";
198				function = "i2s_out_ao";
199				bias-disable;
200			};
201		};
202
203		i2s_out_lr_clk_pins: i2s_out_lr_clk {
204			mux {
205				groups = "i2s_out_lr_clk";
206				function = "i2s_out_ao";
207				bias-disable;
208			};
209		};
210
211		i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
212			mux {
213				groups = "i2s_out_ch01_ao";
214				function = "i2s_out_ao";
215				bias-disable;
216			};
217		};
218
219		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
220			mux {
221				groups = "i2s_out_ch23_ao";
222				function = "i2s_out_ao";
223				bias-disable;
224			};
225		};
226
227		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
228			mux {
229				groups = "i2s_out_ch45_ao";
230				function = "i2s_out_ao";
231				bias-disable;
232			};
233		};
234
235		spdif_out_ao_6_pins: spdif_out_ao_6 {
236			mux {
237				groups = "spdif_out_ao_6";
238				function = "spdif_out_ao";
239			};
240		};
241
242		spdif_out_ao_13_pins: spdif_out_ao_13 {
243			mux {
244				groups = "spdif_out_ao_13";
245				function = "spdif_out_ao";
246				bias-disable;
247			};
248		};
249
250		ao_cec_pins: ao_cec {
251			mux {
252				groups = "ao_cec";
253				function = "cec_ao";
254				bias-disable;
255			};
256		};
257
258		ee_cec_pins: ee_cec {
259			mux {
260				groups = "ee_cec";
261				function = "cec_ao";
262				bias-disable;
263			};
264		};
265	};
266};
267
268&cbus {
269	spifc: spi@8c80 {
270		compatible = "amlogic,meson-gxbb-spifc";
271		reg = <0x0 0x08c80 0x0 0x80>;
272		#address-cells = <1>;
273		#size-cells = <0>;
274		clocks = <&clkc CLKID_SPI>;
275		status = "disabled";
276	};
277};
278
279&cec_AO {
280	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
281	clock-names = "core";
282};
283
284&clkc_AO {
285	compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
286	clocks = <&xtal>, <&clkc CLKID_CLK81>;
287	clock-names = "xtal", "mpeg-clk";
288};
289
290&efuse {
291	clocks = <&clkc CLKID_EFUSE>;
292};
293
294&ethmac {
295	clocks = <&clkc CLKID_ETH>,
296		 <&clkc CLKID_FCLK_DIV2>,
297		 <&clkc CLKID_MPLL2>,
298		 <&clkc CLKID_FCLK_DIV2>;
299	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
300};
301
302&gpio_intc {
303	compatible = "amlogic,meson-gpio-intc",
304		     "amlogic,meson-gxbb-gpio-intc";
305	status = "okay";
306};
307
308&hdmi_tx {
309	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
310	resets = <&reset RESET_HDMITX_CAPB3>,
311		 <&reset RESET_HDMI_SYSTEM_RESET>,
312		 <&reset RESET_HDMI_TX>;
313	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
314	clocks = <&clkc CLKID_HDMI_PCLK>,
315		 <&clkc CLKID_CLK81>,
316		 <&clkc CLKID_GCLK_VENCI_INT0>;
317	clock-names = "isfr", "iahb", "venci";
318};
319
320&sysctrl {
321	clkc: clock-controller {
322		compatible = "amlogic,gxbb-clkc";
323		#clock-cells = <1>;
324		clocks = <&xtal>;
325		clock-names = "xtal";
326	};
327};
328
329&hwrng {
330	clocks = <&clkc CLKID_RNG0>;
331	clock-names = "core";
332};
333
334&i2c_A {
335	clocks = <&clkc CLKID_I2C>;
336};
337
338&i2c_AO {
339	clocks = <&clkc CLKID_AO_I2C>;
340};
341
342&i2c_B {
343	clocks = <&clkc CLKID_I2C>;
344};
345
346&i2c_C {
347	clocks = <&clkc CLKID_I2C>;
348};
349
350&mali {
351	compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
352
353	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
354	clock-names = "bus", "core";
355
356	assigned-clocks = <&clkc CLKID_GP0_PLL>;
357	assigned-clock-rates = <744000000>;
358};
359
360&periphs {
361	pinctrl_periphs: pinctrl@4b0 {
362		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
363		#address-cells = <2>;
364		#size-cells = <2>;
365		ranges;
366
367		gpio: bank@4b0 {
368			reg = <0x0 0x004b0 0x0 0x28>,
369			      <0x0 0x004e8 0x0 0x14>,
370			      <0x0 0x00520 0x0 0x14>,
371			      <0x0 0x00430 0x0 0x40>;
372			reg-names = "mux", "pull", "pull-enable", "gpio";
373			gpio-controller;
374			#gpio-cells = <2>;
375			gpio-ranges = <&pinctrl_periphs 0 0 119>;
376		};
377
378		emmc_pins: emmc {
379			mux-0 {
380				groups = "emmc_nand_d07",
381				       "emmc_cmd";
382				function = "emmc";
383				bias-pull-up;
384			};
385
386			mux-1 {
387				groups = "emmc_clk";
388				function = "emmc";
389				bias-disable;
390			};
391		};
392
393		emmc_ds_pins: emmc-ds {
394			mux {
395				groups = "emmc_ds";
396				function = "emmc";
397				bias-pull-down;
398			};
399		};
400
401		emmc_clk_gate_pins: emmc_clk_gate {
402			mux {
403				groups = "BOOT_8";
404				function = "gpio_periphs";
405				bias-pull-down;
406			};
407		};
408
409		nor_pins: nor {
410			mux {
411				groups = "nor_d",
412				       "nor_q",
413				       "nor_c",
414				       "nor_cs";
415				function = "nor";
416				bias-disable;
417			};
418		};
419
420		spi_pins: spi-pins {
421			mux {
422				groups = "spi_miso",
423					"spi_mosi",
424					"spi_sclk";
425				function = "spi";
426				bias-disable;
427			};
428		};
429
430		spi_ss0_pins: spi-ss0 {
431			mux {
432				groups = "spi_ss0";
433				function = "spi";
434				bias-disable;
435			};
436		};
437
438		sdcard_pins: sdcard {
439			mux-0 {
440				groups = "sdcard_d0",
441				       "sdcard_d1",
442				       "sdcard_d2",
443				       "sdcard_d3",
444				       "sdcard_cmd";
445				function = "sdcard";
446				bias-pull-up;
447			};
448
449			mux-1 {
450				groups = "sdcard_clk";
451				function = "sdcard";
452				bias-disable;
453			};
454		};
455
456		sdcard_clk_gate_pins: sdcard_clk_gate {
457			mux {
458				groups = "CARD_2";
459				function = "gpio_periphs";
460				bias-pull-down;
461			};
462		};
463
464		sdio_pins: sdio {
465			mux-0 {
466				groups = "sdio_d0",
467				       "sdio_d1",
468				       "sdio_d2",
469				       "sdio_d3",
470				       "sdio_cmd";
471				function = "sdio";
472				bias-pull-up;
473			};
474
475			mux-1 {
476				groups = "sdio_clk";
477				function = "sdio";
478				bias-disable;
479			};
480		};
481
482		sdio_clk_gate_pins: sdio_clk_gate {
483			mux {
484				groups = "GPIOX_4";
485				function = "gpio_periphs";
486				bias-pull-down;
487			};
488		};
489
490		sdio_irq_pins: sdio_irq {
491			mux {
492				groups = "sdio_irq";
493				function = "sdio";
494				bias-disable;
495			};
496		};
497
498		uart_a_pins: uart_a {
499			mux {
500				groups = "uart_tx_a",
501				       "uart_rx_a";
502				function = "uart_a";
503				bias-disable;
504			};
505		};
506
507		uart_a_cts_rts_pins: uart_a_cts_rts {
508			mux {
509				groups = "uart_cts_a",
510				       "uart_rts_a";
511				function = "uart_a";
512				bias-disable;
513			};
514		};
515
516		uart_b_pins: uart_b {
517			mux {
518				groups = "uart_tx_b",
519				       "uart_rx_b";
520				function = "uart_b";
521				bias-disable;
522			};
523		};
524
525		uart_b_cts_rts_pins: uart_b_cts_rts {
526			mux {
527				groups = "uart_cts_b",
528				       "uart_rts_b";
529				function = "uart_b";
530				bias-disable;
531			};
532		};
533
534		uart_c_pins: uart_c {
535			mux {
536				groups = "uart_tx_c",
537				       "uart_rx_c";
538				function = "uart_c";
539				bias-disable;
540			};
541		};
542
543		uart_c_cts_rts_pins: uart_c_cts_rts {
544			mux {
545				groups = "uart_cts_c",
546				       "uart_rts_c";
547				function = "uart_c";
548				bias-disable;
549			};
550		};
551
552		i2c_a_pins: i2c_a {
553			mux {
554				groups = "i2c_sck_a",
555				       "i2c_sda_a";
556				function = "i2c_a";
557				bias-disable;
558			};
559		};
560
561		i2c_b_pins: i2c_b {
562			mux {
563				groups = "i2c_sck_b",
564				       "i2c_sda_b";
565				function = "i2c_b";
566				bias-disable;
567			};
568		};
569
570		i2c_c_pins: i2c_c {
571			mux {
572				groups = "i2c_sck_c",
573				       "i2c_sda_c";
574				function = "i2c_c";
575				bias-disable;
576			};
577		};
578
579		eth_rgmii_pins: eth-rgmii {
580			mux {
581				groups = "eth_mdio",
582				       "eth_mdc",
583				       "eth_clk_rx_clk",
584				       "eth_rx_dv",
585				       "eth_rxd0",
586				       "eth_rxd1",
587				       "eth_rxd2",
588				       "eth_rxd3",
589				       "eth_rgmii_tx_clk",
590				       "eth_tx_en",
591				       "eth_txd0",
592				       "eth_txd1",
593				       "eth_txd2",
594				       "eth_txd3";
595				function = "eth";
596				bias-disable;
597			};
598		};
599
600		eth_rmii_pins: eth-rmii {
601			mux {
602				groups = "eth_mdio",
603				       "eth_mdc",
604				       "eth_clk_rx_clk",
605				       "eth_rx_dv",
606				       "eth_rxd0",
607				       "eth_rxd1",
608				       "eth_tx_en",
609				       "eth_txd0",
610				       "eth_txd1";
611				function = "eth";
612				bias-disable;
613			};
614		};
615
616		pwm_a_x_pins: pwm_a_x {
617			mux {
618				groups = "pwm_a_x";
619				function = "pwm_a_x";
620				bias-disable;
621			};
622		};
623
624		pwm_a_y_pins: pwm_a_y {
625			mux {
626				groups = "pwm_a_y";
627				function = "pwm_a_y";
628				bias-disable;
629			};
630		};
631
632		pwm_b_pins: pwm_b {
633			mux {
634				groups = "pwm_b";
635				function = "pwm_b";
636				bias-disable;
637			};
638		};
639
640		pwm_d_pins: pwm_d {
641			mux {
642				groups = "pwm_d";
643				function = "pwm_d";
644				bias-disable;
645			};
646		};
647
648		pwm_e_pins: pwm_e {
649			mux {
650				groups = "pwm_e";
651				function = "pwm_e";
652				bias-disable;
653			};
654		};
655
656		pwm_f_x_pins: pwm_f_x {
657			mux {
658				groups = "pwm_f_x";
659				function = "pwm_f_x";
660				bias-disable;
661			};
662		};
663
664		pwm_f_y_pins: pwm_f_y {
665			mux {
666				groups = "pwm_f_y";
667				function = "pwm_f_y";
668				bias-disable;
669			};
670		};
671
672		hdmi_hpd_pins: hdmi_hpd {
673			mux {
674				groups = "hdmi_hpd";
675				function = "hdmi_hpd";
676				bias-disable;
677			};
678		};
679
680		hdmi_i2c_pins: hdmi_i2c {
681			mux {
682				groups = "hdmi_sda", "hdmi_scl";
683				function = "hdmi_i2c";
684				bias-disable;
685			};
686		};
687
688		i2sout_ch23_y_pins: i2sout_ch23_y {
689			mux {
690				groups = "i2sout_ch23_y";
691				function = "i2s_out";
692				bias-disable;
693			};
694		};
695
696		i2sout_ch45_y_pins: i2sout_ch45_y {
697			mux {
698				groups = "i2sout_ch45_y";
699				function = "i2s_out";
700				bias-disable;
701			};
702		};
703
704		i2sout_ch67_y_pins: i2sout_ch67_y {
705			mux {
706				groups = "i2sout_ch67_y";
707				function = "i2s_out";
708				bias-disable;
709			};
710		};
711
712		spdif_out_y_pins: spdif_out_y {
713			mux {
714				groups = "spdif_out_y";
715				function = "spdif_out";
716				bias-disable;
717			};
718		};
719	};
720};
721
722&pwrc {
723	resets = <&reset RESET_VIU>,
724		 <&reset RESET_VENC>,
725		 <&reset RESET_VCBUS>,
726		 <&reset RESET_BT656>,
727		 <&reset RESET_DVIN_RESET>,
728		 <&reset RESET_RDMA>,
729		 <&reset RESET_VENCI>,
730		 <&reset RESET_VENCP>,
731		 <&reset RESET_VDAC>,
732		 <&reset RESET_VDI6>,
733		 <&reset RESET_VENCL>,
734		 <&reset RESET_VID_LOCK>;
735	reset-names = "viu", "venc", "vcbus", "bt656",
736		      "dvin", "rdma", "venci", "vencp",
737		      "vdac", "vdi6", "vencl", "vid_lock";
738	clocks = <&clkc CLKID_VPU>,
739	         <&clkc CLKID_VAPB>;
740	clock-names = "vpu", "vapb";
741	/*
742	 * VPU clocking is provided by two identical clock paths
743	 * VPU_0 and VPU_1 muxed to a single clock by a glitch
744	 * free mux to safely change frequency while running.
745	 * Same for VAPB but with a final gate after the glitch free mux.
746	 */
747	assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
748			  <&clkc CLKID_VPU_0>,
749			  <&clkc CLKID_VPU>, /* Glitch free mux */
750			  <&clkc CLKID_VAPB_0_SEL>,
751			  <&clkc CLKID_VAPB_0>,
752			  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
753	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
754				 <0>, /* Do Nothing */
755				 <&clkc CLKID_VPU_0>,
756				 <&clkc CLKID_FCLK_DIV4>,
757				 <0>, /* Do Nothing */
758				 <&clkc CLKID_VAPB_0>;
759	assigned-clock-rates = <0>, /* Do Nothing */
760			       <666666666>,
761			       <0>, /* Do Nothing */
762			       <0>, /* Do Nothing */
763			       <250000000>,
764			       <0>; /* Do Nothing */
765};
766
767&saradc {
768	compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
769	clocks = <&xtal>,
770		 <&clkc CLKID_SAR_ADC>,
771		 <&clkc CLKID_SAR_ADC_CLK>,
772		 <&clkc CLKID_SAR_ADC_SEL>;
773	clock-names = "clkin", "core", "adc_clk", "adc_sel";
774};
775
776&sd_emmc_a {
777	clocks = <&clkc CLKID_SD_EMMC_A>,
778		 <&clkc CLKID_SD_EMMC_A_CLK0>,
779		 <&clkc CLKID_FCLK_DIV2>;
780	clock-names = "core", "clkin0", "clkin1";
781	resets = <&reset RESET_SD_EMMC_A>;
782};
783
784&sd_emmc_b {
785	clocks = <&clkc CLKID_SD_EMMC_B>,
786		 <&clkc CLKID_SD_EMMC_B_CLK0>,
787		 <&clkc CLKID_FCLK_DIV2>;
788	clock-names = "core", "clkin0", "clkin1";
789	resets = <&reset RESET_SD_EMMC_B>;
790};
791
792&sd_emmc_c {
793	clocks = <&clkc CLKID_SD_EMMC_C>,
794		 <&clkc CLKID_SD_EMMC_C_CLK0>,
795		 <&clkc CLKID_FCLK_DIV2>;
796	clock-names = "core", "clkin0", "clkin1";
797	resets = <&reset RESET_SD_EMMC_C>;
798};
799
800&simplefb_hdmi {
801	clocks = <&clkc CLKID_HDMI_PCLK>,
802		 <&clkc CLKID_CLK81>,
803		 <&clkc CLKID_GCLK_VENCI_INT0>;
804};
805
806&spicc {
807	clocks = <&clkc CLKID_SPICC>;
808	clock-names = "core";
809	resets = <&reset RESET_PERIPHS_SPICC>;
810	num-cs = <1>;
811};
812
813&spifc {
814	clocks = <&clkc CLKID_SPI>;
815};
816
817&uart_A {
818	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
819	clock-names = "xtal", "pclk", "baud";
820};
821
822&uart_AO {
823	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
824	clock-names = "xtal", "pclk", "baud";
825};
826
827&uart_AO_B {
828	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
829	clock-names = "xtal", "pclk", "baud";
830};
831
832&uart_B {
833	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
834	clock-names = "xtal", "pclk", "baud";
835};
836
837&uart_C {
838	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
839	clock-names = "xtal", "pclk", "baud";
840};
841
842&vpu {
843	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
844	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
845};
846
847&vdec {
848	compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
849	clocks = <&clkc CLKID_DOS_PARSER>,
850		 <&clkc CLKID_DOS>,
851		 <&clkc CLKID_VDEC_1>,
852		 <&clkc CLKID_VDEC_HEVC>;
853	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
854	resets = <&reset RESET_PARSER>;
855	reset-names = "esparser";
856};
857