xref: /freebsd/sys/contrib/device-tree/src/arm64/amlogic/meson-gxbb.dtsi (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2016 Andreas Färber
4 */
5
6#include "meson-gx.dtsi"
7#include "meson-gx-mali450.dtsi"
8#include <dt-bindings/gpio/meson-gxbb-gpio.h>
9#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
10#include <dt-bindings/clock/gxbb-clkc.h>
11#include <dt-bindings/clock/gxbb-aoclkc.h>
12#include <dt-bindings/reset/gxbb-aoclkc.h>
13
14/ {
15	compatible = "amlogic,meson-gxbb";
16
17	soc {
18		usb0_phy: phy@c0000000 {
19			compatible = "amlogic,meson-gxbb-usb2-phy";
20			#phy-cells = <0>;
21			reg = <0x0 0xc0000000 0x0 0x20>;
22			resets = <&reset RESET_USB_OTG>;
23			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
24			clock-names = "usb_general", "usb";
25			status = "disabled";
26		};
27
28		usb1_phy: phy@c0000020 {
29			compatible = "amlogic,meson-gxbb-usb2-phy";
30			#phy-cells = <0>;
31			reg = <0x0 0xc0000020 0x0 0x20>;
32			resets = <&reset RESET_USB_OTG>;
33			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
34			clock-names = "usb_general", "usb";
35			status = "disabled";
36		};
37
38		usb0: usb@c9000000 {
39			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
40			reg = <0x0 0xc9000000 0x0 0x40000>;
41			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
42			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
43			clock-names = "otg";
44			phys = <&usb0_phy>;
45			phy-names = "usb2-phy";
46			dr_mode = "host";
47			status = "disabled";
48		};
49
50		usb1: usb@c9100000 {
51			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
52			reg = <0x0 0xc9100000 0x0 0x40000>;
53			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
54			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
55			clock-names = "otg";
56			phys = <&usb1_phy>;
57			phy-names = "usb2-phy";
58			dr_mode = "host";
59			status = "disabled";
60		};
61	};
62};
63
64&aiu {
65	compatible = "amlogic,aiu-gxbb", "amlogic,aiu";
66	clocks = <&clkc CLKID_AIU_GLUE>,
67		 <&clkc CLKID_I2S_OUT>,
68		 <&clkc CLKID_AOCLK_GATE>,
69		 <&clkc CLKID_CTS_AMCLK>,
70		 <&clkc CLKID_MIXER_IFACE>,
71		 <&clkc CLKID_IEC958>,
72		 <&clkc CLKID_IEC958_GATE>,
73		 <&clkc CLKID_CTS_MCLK_I958>,
74		 <&clkc CLKID_CTS_I958>;
75	clock-names = "pclk",
76		      "i2s_pclk",
77		      "i2s_aoclk",
78		      "i2s_mclk",
79		      "i2s_mixer",
80		      "spdif_pclk",
81		      "spdif_aoclk",
82		      "spdif_mclk",
83		      "spdif_mclk_sel";
84	resets = <&reset RESET_AIU>;
85};
86
87&aobus {
88	pinctrl_aobus: pinctrl@14 {
89		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
90		#address-cells = <2>;
91		#size-cells = <2>;
92		ranges;
93
94		gpio_ao: bank@14 {
95			reg = <0x0 0x00014 0x0 0x8>,
96			      <0x0 0x0002c 0x0 0x4>,
97			      <0x0 0x00024 0x0 0x8>;
98			reg-names = "mux", "pull", "gpio";
99			gpio-controller;
100			#gpio-cells = <2>;
101			gpio-ranges = <&pinctrl_aobus 0 0 14>;
102		};
103
104		uart_ao_a_pins: uart_ao_a {
105			mux {
106				groups = "uart_tx_ao_a", "uart_rx_ao_a";
107				function = "uart_ao";
108				bias-disable;
109			};
110		};
111
112		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
113			mux {
114				groups = "uart_cts_ao_a",
115				       "uart_rts_ao_a";
116				function = "uart_ao";
117				bias-disable;
118			};
119		};
120
121		uart_ao_b_pins: uart_ao_b {
122			mux {
123				groups = "uart_tx_ao_b", "uart_rx_ao_b";
124				function = "uart_ao_b";
125				bias-disable;
126			};
127		};
128
129		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
130			mux {
131				groups = "uart_cts_ao_b",
132				       "uart_rts_ao_b";
133				function = "uart_ao_b";
134				bias-disable;
135			};
136		};
137
138		remote_input_ao_pins: remote_input_ao {
139			mux {
140				groups = "remote_input_ao";
141				function = "remote_input_ao";
142				bias-disable;
143			};
144		};
145
146		i2c_ao_pins: i2c_ao {
147			mux {
148				groups = "i2c_sck_ao",
149				       "i2c_sda_ao";
150				function = "i2c_ao";
151				bias-disable;
152			};
153		};
154
155		pwm_ao_a_3_pins: pwm_ao_a_3 {
156			mux {
157				groups = "pwm_ao_a_3";
158				function = "pwm_ao_a_3";
159				bias-disable;
160			};
161		};
162
163		pwm_ao_a_6_pins: pwm_ao_a_6 {
164			mux {
165				groups = "pwm_ao_a_6";
166				function = "pwm_ao_a_6";
167				bias-disable;
168			};
169		};
170
171		pwm_ao_a_12_pins: pwm_ao_a_12 {
172			mux {
173				groups = "pwm_ao_a_12";
174				function = "pwm_ao_a_12";
175				bias-disable;
176			};
177		};
178
179		pwm_ao_b_pins: pwm_ao_b {
180			mux {
181				groups = "pwm_ao_b";
182				function = "pwm_ao_b";
183				bias-disable;
184			};
185		};
186
187		i2s_am_clk_pins: i2s_am_clk {
188			mux {
189				groups = "i2s_am_clk";
190				function = "i2s_out_ao";
191				bias-disable;
192			};
193		};
194
195		i2s_out_ao_clk_pins: i2s_out_ao_clk {
196			mux {
197				groups = "i2s_out_ao_clk";
198				function = "i2s_out_ao";
199				bias-disable;
200			};
201		};
202
203		i2s_out_lr_clk_pins: i2s_out_lr_clk {
204			mux {
205				groups = "i2s_out_lr_clk";
206				function = "i2s_out_ao";
207				bias-disable;
208			};
209		};
210
211		i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
212			mux {
213				groups = "i2s_out_ch01_ao";
214				function = "i2s_out_ao";
215				bias-disable;
216			};
217		};
218
219		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
220			mux {
221				groups = "i2s_out_ch23_ao";
222				function = "i2s_out_ao";
223				bias-disable;
224			};
225		};
226
227		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
228			mux {
229				groups = "i2s_out_ch45_ao";
230				function = "i2s_out_ao";
231				bias-disable;
232			};
233		};
234
235		spdif_out_ao_6_pins: spdif_out_ao_6 {
236			mux {
237				groups = "spdif_out_ao_6";
238				function = "spdif_out_ao";
239			};
240		};
241
242		spdif_out_ao_13_pins: spdif_out_ao_13 {
243			mux {
244				groups = "spdif_out_ao_13";
245				function = "spdif_out_ao";
246				bias-disable;
247			};
248		};
249
250		ao_cec_pins: ao_cec {
251			mux {
252				groups = "ao_cec";
253				function = "cec_ao";
254				bias-disable;
255			};
256		};
257
258		ee_cec_pins: ee_cec {
259			mux {
260				groups = "ee_cec";
261				function = "cec_ao";
262				bias-disable;
263			};
264		};
265	};
266};
267
268&cbus {
269	spifc: spi@8c80 {
270		compatible = "amlogic,meson-gxbb-spifc";
271		reg = <0x0 0x08c80 0x0 0x80>;
272		#address-cells = <1>;
273		#size-cells = <0>;
274		clocks = <&clkc CLKID_SPI>;
275		status = "disabled";
276	};
277};
278
279&cec_AO {
280	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
281	clock-names = "core";
282};
283
284&clkc_AO {
285	compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
286	clocks = <&xtal>, <&clkc CLKID_CLK81>;
287	clock-names = "xtal", "mpeg-clk";
288};
289
290&efuse {
291	clocks = <&clkc CLKID_EFUSE>;
292};
293
294&ethmac {
295	clocks = <&clkc CLKID_ETH>,
296		 <&clkc CLKID_FCLK_DIV2>,
297		 <&clkc CLKID_MPLL2>,
298		 <&clkc CLKID_FCLK_DIV2>;
299	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
300};
301
302&gpio_intc {
303	compatible = "amlogic,meson-gxbb-gpio-intc",
304		     "amlogic,meson-gpio-intc";
305	status = "okay";
306};
307
308&hdmi_tx {
309	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
310	resets = <&reset RESET_HDMITX_CAPB3>,
311		 <&reset RESET_HDMI_SYSTEM_RESET>,
312		 <&reset RESET_HDMI_TX>;
313	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
314	clocks = <&clkc CLKID_HDMI_PCLK>,
315		 <&clkc CLKID_CLK81>,
316		 <&clkc CLKID_GCLK_VENCI_INT0>;
317	clock-names = "isfr", "iahb", "venci";
318};
319
320&sysctrl {
321	clkc: clock-controller {
322		compatible = "amlogic,gxbb-clkc";
323		#clock-cells = <1>;
324		clocks = <&xtal>;
325		clock-names = "xtal";
326	};
327};
328
329&hwrng {
330	clocks = <&clkc CLKID_RNG0>;
331	clock-names = "core";
332};
333
334&i2c_A {
335	clocks = <&clkc CLKID_I2C>;
336};
337
338&i2c_AO {
339	clocks = <&clkc CLKID_AO_I2C>;
340};
341
342&i2c_B {
343	clocks = <&clkc CLKID_I2C>;
344};
345
346&i2c_C {
347	clocks = <&clkc CLKID_I2C>;
348};
349
350&mali {
351	compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
352
353	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
354	clock-names = "bus", "core";
355
356	assigned-clocks = <&clkc CLKID_GP0_PLL>;
357	assigned-clock-rates = <744000000>;
358};
359
360&periphs {
361	pinctrl_periphs: pinctrl@4b0 {
362		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
363		#address-cells = <2>;
364		#size-cells = <2>;
365		ranges;
366
367		gpio: bank@4b0 {
368			reg = <0x0 0x004b0 0x0 0x28>,
369			      <0x0 0x004e8 0x0 0x14>,
370			      <0x0 0x00520 0x0 0x14>,
371			      <0x0 0x00430 0x0 0x40>;
372			reg-names = "mux", "pull", "pull-enable", "gpio";
373			gpio-controller;
374			#gpio-cells = <2>;
375			gpio-ranges = <&pinctrl_periphs 0 0 119>;
376		};
377
378		emmc_pins: emmc {
379			mux-0 {
380				groups = "emmc_nand_d07",
381				       "emmc_cmd";
382				function = "emmc";
383				bias-pull-up;
384			};
385
386			mux-1 {
387				groups = "emmc_clk";
388				function = "emmc";
389				bias-disable;
390			};
391		};
392
393		emmc_ds_pins: emmc-ds {
394			mux {
395				groups = "emmc_ds";
396				function = "emmc";
397				bias-pull-down;
398			};
399		};
400
401		emmc_clk_gate_pins: emmc_clk_gate {
402			mux {
403				groups = "BOOT_8";
404				function = "gpio_periphs";
405				bias-pull-down;
406			};
407		};
408
409		nor_pins: nor {
410			mux {
411				groups = "nor_d",
412				       "nor_q",
413				       "nor_c",
414				       "nor_cs";
415				function = "nor";
416				bias-disable;
417			};
418		};
419
420		spi_pins: spi-pins {
421			mux {
422				groups = "spi_miso",
423					"spi_mosi",
424					"spi_sclk";
425				function = "spi";
426				bias-disable;
427			};
428		};
429
430		spi_idle_high_pins: spi-idle-high-pins {
431			mux {
432				groups = "spi_sclk";
433				bias-pull-up;
434			};
435		};
436
437		spi_idle_low_pins: spi-idle-low-pins {
438			mux {
439				groups = "spi_sclk";
440				bias-pull-down;
441			};
442		};
443
444		spi_ss0_pins: spi-ss0 {
445			mux {
446				groups = "spi_ss0";
447				function = "spi";
448				bias-disable;
449			};
450		};
451
452		sdcard_pins: sdcard {
453			mux-0 {
454				groups = "sdcard_d0",
455				       "sdcard_d1",
456				       "sdcard_d2",
457				       "sdcard_d3",
458				       "sdcard_cmd";
459				function = "sdcard";
460				bias-pull-up;
461			};
462
463			mux-1 {
464				groups = "sdcard_clk";
465				function = "sdcard";
466				bias-disable;
467			};
468		};
469
470		sdcard_clk_gate_pins: sdcard_clk_gate {
471			mux {
472				groups = "CARD_2";
473				function = "gpio_periphs";
474				bias-pull-down;
475			};
476		};
477
478		sdio_pins: sdio {
479			mux-0 {
480				groups = "sdio_d0",
481				       "sdio_d1",
482				       "sdio_d2",
483				       "sdio_d3",
484				       "sdio_cmd";
485				function = "sdio";
486				bias-pull-up;
487			};
488
489			mux-1 {
490				groups = "sdio_clk";
491				function = "sdio";
492				bias-disable;
493			};
494		};
495
496		sdio_clk_gate_pins: sdio_clk_gate {
497			mux {
498				groups = "GPIOX_4";
499				function = "gpio_periphs";
500				bias-pull-down;
501			};
502		};
503
504		sdio_irq_pins: sdio_irq {
505			mux {
506				groups = "sdio_irq";
507				function = "sdio";
508				bias-disable;
509			};
510		};
511
512		uart_a_pins: uart_a {
513			mux {
514				groups = "uart_tx_a",
515				       "uart_rx_a";
516				function = "uart_a";
517				bias-disable;
518			};
519		};
520
521		uart_a_cts_rts_pins: uart_a_cts_rts {
522			mux {
523				groups = "uart_cts_a",
524				       "uart_rts_a";
525				function = "uart_a";
526				bias-disable;
527			};
528		};
529
530		uart_b_pins: uart_b {
531			mux {
532				groups = "uart_tx_b",
533				       "uart_rx_b";
534				function = "uart_b";
535				bias-disable;
536			};
537		};
538
539		uart_b_cts_rts_pins: uart_b_cts_rts {
540			mux {
541				groups = "uart_cts_b",
542				       "uart_rts_b";
543				function = "uart_b";
544				bias-disable;
545			};
546		};
547
548		uart_c_pins: uart_c {
549			mux {
550				groups = "uart_tx_c",
551				       "uart_rx_c";
552				function = "uart_c";
553				bias-disable;
554			};
555		};
556
557		uart_c_cts_rts_pins: uart_c_cts_rts {
558			mux {
559				groups = "uart_cts_c",
560				       "uart_rts_c";
561				function = "uart_c";
562				bias-disable;
563			};
564		};
565
566		i2c_a_pins: i2c_a {
567			mux {
568				groups = "i2c_sck_a",
569				       "i2c_sda_a";
570				function = "i2c_a";
571				bias-disable;
572			};
573		};
574
575		i2c_b_pins: i2c_b {
576			mux {
577				groups = "i2c_sck_b",
578				       "i2c_sda_b";
579				function = "i2c_b";
580				bias-disable;
581			};
582		};
583
584		i2c_c_pins: i2c_c {
585			mux {
586				groups = "i2c_sck_c",
587				       "i2c_sda_c";
588				function = "i2c_c";
589				bias-disable;
590			};
591		};
592
593		eth_rgmii_pins: eth-rgmii {
594			mux {
595				groups = "eth_mdio",
596				       "eth_mdc",
597				       "eth_clk_rx_clk",
598				       "eth_rx_dv",
599				       "eth_rxd0",
600				       "eth_rxd1",
601				       "eth_rxd2",
602				       "eth_rxd3",
603				       "eth_rgmii_tx_clk",
604				       "eth_tx_en",
605				       "eth_txd0",
606				       "eth_txd1",
607				       "eth_txd2",
608				       "eth_txd3";
609				function = "eth";
610				bias-disable;
611			};
612		};
613
614		eth_rmii_pins: eth-rmii {
615			mux {
616				groups = "eth_mdio",
617				       "eth_mdc",
618				       "eth_clk_rx_clk",
619				       "eth_rx_dv",
620				       "eth_rxd0",
621				       "eth_rxd1",
622				       "eth_tx_en",
623				       "eth_txd0",
624				       "eth_txd1";
625				function = "eth";
626				bias-disable;
627			};
628		};
629
630		pwm_a_x_pins: pwm_a_x {
631			mux {
632				groups = "pwm_a_x";
633				function = "pwm_a_x";
634				bias-disable;
635			};
636		};
637
638		pwm_a_y_pins: pwm_a_y {
639			mux {
640				groups = "pwm_a_y";
641				function = "pwm_a_y";
642				bias-disable;
643			};
644		};
645
646		pwm_b_pins: pwm_b {
647			mux {
648				groups = "pwm_b";
649				function = "pwm_b";
650				bias-disable;
651			};
652		};
653
654		pwm_d_pins: pwm_d {
655			mux {
656				groups = "pwm_d";
657				function = "pwm_d";
658				bias-disable;
659			};
660		};
661
662		pwm_e_pins: pwm_e {
663			mux {
664				groups = "pwm_e";
665				function = "pwm_e";
666				bias-disable;
667			};
668		};
669
670		pwm_f_x_pins: pwm_f_x {
671			mux {
672				groups = "pwm_f_x";
673				function = "pwm_f_x";
674				bias-disable;
675			};
676		};
677
678		pwm_f_y_pins: pwm_f_y {
679			mux {
680				groups = "pwm_f_y";
681				function = "pwm_f_y";
682				bias-disable;
683			};
684		};
685
686		hdmi_hpd_pins: hdmi_hpd {
687			mux {
688				groups = "hdmi_hpd";
689				function = "hdmi_hpd";
690				bias-disable;
691			};
692		};
693
694		hdmi_i2c_pins: hdmi_i2c {
695			mux {
696				groups = "hdmi_sda", "hdmi_scl";
697				function = "hdmi_i2c";
698				bias-disable;
699			};
700		};
701
702		i2sout_ch23_y_pins: i2sout_ch23_y {
703			mux {
704				groups = "i2sout_ch23_y";
705				function = "i2s_out";
706				bias-disable;
707			};
708		};
709
710		i2sout_ch45_y_pins: i2sout_ch45_y {
711			mux {
712				groups = "i2sout_ch45_y";
713				function = "i2s_out";
714				bias-disable;
715			};
716		};
717
718		i2sout_ch67_y_pins: i2sout_ch67_y {
719			mux {
720				groups = "i2sout_ch67_y";
721				function = "i2s_out";
722				bias-disable;
723			};
724		};
725
726		spdif_out_y_pins: spdif_out_y {
727			mux {
728				groups = "spdif_out_y";
729				function = "spdif_out";
730				bias-disable;
731			};
732		};
733	};
734};
735
736&pwrc {
737	resets = <&reset RESET_VIU>,
738		 <&reset RESET_VENC>,
739		 <&reset RESET_VCBUS>,
740		 <&reset RESET_BT656>,
741		 <&reset RESET_DVIN_RESET>,
742		 <&reset RESET_RDMA>,
743		 <&reset RESET_VENCI>,
744		 <&reset RESET_VENCP>,
745		 <&reset RESET_VDAC>,
746		 <&reset RESET_VDI6>,
747		 <&reset RESET_VENCL>,
748		 <&reset RESET_VID_LOCK>;
749	reset-names = "viu", "venc", "vcbus", "bt656",
750		      "dvin", "rdma", "venci", "vencp",
751		      "vdac", "vdi6", "vencl", "vid_lock";
752	clocks = <&clkc CLKID_VPU>,
753	         <&clkc CLKID_VAPB>;
754	clock-names = "vpu", "vapb";
755	/*
756	 * VPU clocking is provided by two identical clock paths
757	 * VPU_0 and VPU_1 muxed to a single clock by a glitch
758	 * free mux to safely change frequency while running.
759	 * Same for VAPB but with a final gate after the glitch free mux.
760	 */
761	assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
762			  <&clkc CLKID_VPU_0>,
763			  <&clkc CLKID_VPU>, /* Glitch free mux */
764			  <&clkc CLKID_VAPB_0_SEL>,
765			  <&clkc CLKID_VAPB_0>,
766			  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
767	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
768				 <0>, /* Do Nothing */
769				 <&clkc CLKID_VPU_0>,
770				 <&clkc CLKID_FCLK_DIV4>,
771				 <0>, /* Do Nothing */
772				 <&clkc CLKID_VAPB_0>;
773	assigned-clock-rates = <0>, /* Do Nothing */
774			       <666666666>,
775			       <0>, /* Do Nothing */
776			       <0>, /* Do Nothing */
777			       <250000000>,
778			       <0>; /* Do Nothing */
779};
780
781&saradc {
782	compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
783	clocks = <&xtal>,
784		 <&clkc CLKID_SAR_ADC>,
785		 <&clkc CLKID_SAR_ADC_CLK>,
786		 <&clkc CLKID_SAR_ADC_SEL>;
787	clock-names = "clkin", "core", "adc_clk", "adc_sel";
788};
789
790&sd_emmc_a {
791	clocks = <&clkc CLKID_SD_EMMC_A>,
792		 <&clkc CLKID_SD_EMMC_A_CLK0>,
793		 <&clkc CLKID_FCLK_DIV2>;
794	clock-names = "core", "clkin0", "clkin1";
795	resets = <&reset RESET_SD_EMMC_A>;
796};
797
798&sd_emmc_b {
799	clocks = <&clkc CLKID_SD_EMMC_B>,
800		 <&clkc CLKID_SD_EMMC_B_CLK0>,
801		 <&clkc CLKID_FCLK_DIV2>;
802	clock-names = "core", "clkin0", "clkin1";
803	resets = <&reset RESET_SD_EMMC_B>;
804};
805
806&sd_emmc_c {
807	clocks = <&clkc CLKID_SD_EMMC_C>,
808		 <&clkc CLKID_SD_EMMC_C_CLK0>,
809		 <&clkc CLKID_FCLK_DIV2>;
810	clock-names = "core", "clkin0", "clkin1";
811	resets = <&reset RESET_SD_EMMC_C>;
812};
813
814&simplefb_hdmi {
815	clocks = <&clkc CLKID_HDMI_PCLK>,
816		 <&clkc CLKID_CLK81>,
817		 <&clkc CLKID_GCLK_VENCI_INT0>;
818};
819
820&spicc {
821	clocks = <&clkc CLKID_SPICC>;
822	clock-names = "core";
823	resets = <&reset RESET_PERIPHS_SPICC>;
824	num-cs = <1>;
825};
826
827&spifc {
828	clocks = <&clkc CLKID_SPI>;
829};
830
831&uart_A {
832	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
833	clock-names = "xtal", "pclk", "baud";
834};
835
836&uart_AO {
837	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
838	clock-names = "xtal", "pclk", "baud";
839};
840
841&uart_AO_B {
842	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
843	clock-names = "xtal", "pclk", "baud";
844};
845
846&uart_B {
847	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
848	clock-names = "xtal", "pclk", "baud";
849};
850
851&uart_C {
852	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
853	clock-names = "xtal", "pclk", "baud";
854};
855
856&vpu {
857	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
858	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
859};
860
861&vdec {
862	compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
863	clocks = <&clkc CLKID_DOS_PARSER>,
864		 <&clkc CLKID_DOS>,
865		 <&clkc CLKID_VDEC_1>,
866		 <&clkc CLKID_VDEC_HEVC>;
867	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
868	resets = <&reset RESET_PARSER>;
869	reset-names = "esparser";
870};
871