1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2018 Amlogic, Inc. All rights reserved. 4 */ 5 6#include <dt-bindings/phy/phy.h> 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/clock/g12a-clkc.h> 9#include <dt-bindings/clock/g12a-aoclkc.h> 10#include <dt-bindings/interrupt-controller/irq.h> 11#include <dt-bindings/interrupt-controller/arm-gic.h> 12#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h> 13#include <dt-bindings/reset/amlogic,meson-g12a-reset.h> 14#include <dt-bindings/thermal/thermal.h> 15 16/ { 17 interrupt-parent = <&gic>; 18 #address-cells = <2>; 19 #size-cells = <2>; 20 21 aliases { 22 mmc0 = &sd_emmc_b; /* SD card */ 23 mmc1 = &sd_emmc_c; /* eMMC */ 24 mmc2 = &sd_emmc_a; /* SDIO */ 25 }; 26 27 chosen { 28 #address-cells = <2>; 29 #size-cells = <2>; 30 ranges; 31 32 simplefb_cvbs: framebuffer-cvbs { 33 compatible = "amlogic,simple-framebuffer", 34 "simple-framebuffer"; 35 amlogic,pipeline = "vpu-cvbs"; 36 clocks = <&clkc CLKID_HDMI>, 37 <&clkc CLKID_HTX_PCLK>, 38 <&clkc CLKID_VPU_INTR>; 39 status = "disabled"; 40 }; 41 42 simplefb_hdmi: framebuffer-hdmi { 43 compatible = "amlogic,simple-framebuffer", 44 "simple-framebuffer"; 45 amlogic,pipeline = "vpu-hdmi"; 46 clocks = <&clkc CLKID_HDMI>, 47 <&clkc CLKID_HTX_PCLK>, 48 <&clkc CLKID_VPU_INTR>; 49 status = "disabled"; 50 }; 51 }; 52 53 efuse: efuse { 54 compatible = "amlogic,meson-gxbb-efuse"; 55 clocks = <&clkc CLKID_EFUSE>; 56 #address-cells = <1>; 57 #size-cells = <1>; 58 read-only; 59 secure-monitor = <&sm>; 60 }; 61 62 gpu_opp_table: opp-table-gpu { 63 compatible = "operating-points-v2"; 64 65 opp-124999998 { 66 opp-hz = /bits/ 64 <124999998>; 67 opp-microvolt = <800000>; 68 }; 69 opp-249999996 { 70 opp-hz = /bits/ 64 <249999996>; 71 opp-microvolt = <800000>; 72 }; 73 opp-285714281 { 74 opp-hz = /bits/ 64 <285714281>; 75 opp-microvolt = <800000>; 76 }; 77 opp-399999994 { 78 opp-hz = /bits/ 64 <399999994>; 79 opp-microvolt = <800000>; 80 }; 81 opp-499999992 { 82 opp-hz = /bits/ 64 <499999992>; 83 opp-microvolt = <800000>; 84 }; 85 opp-666666656 { 86 opp-hz = /bits/ 64 <666666656>; 87 opp-microvolt = <800000>; 88 }; 89 opp-799999987 { 90 opp-hz = /bits/ 64 <799999987>; 91 opp-microvolt = <800000>; 92 }; 93 }; 94 95 psci { 96 compatible = "arm,psci-1.0"; 97 method = "smc"; 98 }; 99 100 reserved-memory { 101 #address-cells = <2>; 102 #size-cells = <2>; 103 ranges; 104 105 /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ 106 secmon_reserved: secmon@5000000 { 107 reg = <0x0 0x05000000 0x0 0x300000>; 108 no-map; 109 }; 110 111 /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ 112 secmon_reserved_bl32: secmon@5300000 { 113 reg = <0x0 0x05300000 0x0 0x2000000>; 114 no-map; 115 }; 116 117 linux,cma { 118 compatible = "shared-dma-pool"; 119 reusable; 120 size = <0x0 0x10000000>; 121 alignment = <0x0 0x400000>; 122 linux,cma-default; 123 }; 124 }; 125 126 sm: secure-monitor { 127 compatible = "amlogic,meson-gxbb-sm"; 128 }; 129 130 soc { 131 compatible = "simple-bus"; 132 #address-cells = <2>; 133 #size-cells = <2>; 134 ranges; 135 136 pcie: pcie@fc000000 { 137 compatible = "amlogic,g12a-pcie", "snps,dw-pcie"; 138 reg = <0x0 0xfc000000 0x0 0x400000>, 139 <0x0 0xff648000 0x0 0x2000>, 140 <0x0 0xfc400000 0x0 0x200000>; 141 reg-names = "elbi", "cfg", "config"; 142 interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; 143 #interrupt-cells = <1>; 144 interrupt-map-mask = <0 0 0 0>; 145 interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; 146 bus-range = <0x0 0xff>; 147 #address-cells = <3>; 148 #size-cells = <2>; 149 device_type = "pci"; 150 ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>, 151 <0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; 152 153 clocks = <&clkc CLKID_PCIE_PHY 154 &clkc CLKID_PCIE_COMB 155 &clkc CLKID_PCIE_PLL>; 156 clock-names = "general", 157 "pclk", 158 "port"; 159 resets = <&reset RESET_PCIE_CTRL_A>, 160 <&reset RESET_PCIE_APB>; 161 reset-names = "port", 162 "apb"; 163 num-lanes = <1>; 164 phys = <&usb3_pcie_phy PHY_TYPE_PCIE>; 165 phy-names = "pcie"; 166 status = "disabled"; 167 }; 168 169 ethmac: ethernet@ff3f0000 { 170 compatible = "amlogic,meson-g12a-dwmac", 171 "snps,dwmac-3.70a", 172 "snps,dwmac"; 173 reg = <0x0 0xff3f0000 0x0 0x10000>, 174 <0x0 0xff634540 0x0 0x8>; 175 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; 176 interrupt-names = "macirq"; 177 clocks = <&clkc CLKID_ETH>, 178 <&clkc CLKID_FCLK_DIV2>, 179 <&clkc CLKID_MPLL2>, 180 <&clkc CLKID_FCLK_DIV2>; 181 clock-names = "stmmaceth", "clkin0", "clkin1", 182 "timing-adjustment"; 183 rx-fifo-depth = <4096>; 184 tx-fifo-depth = <2048>; 185 status = "disabled"; 186 187 mdio0: mdio { 188 #address-cells = <1>; 189 #size-cells = <0>; 190 compatible = "snps,dwmac-mdio"; 191 }; 192 }; 193 194 apb: bus@ff600000 { 195 compatible = "simple-bus"; 196 reg = <0x0 0xff600000 0x0 0x200000>; 197 #address-cells = <2>; 198 #size-cells = <2>; 199 ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; 200 201 hdmi_tx: hdmi-tx@0 { 202 compatible = "amlogic,meson-g12a-dw-hdmi"; 203 reg = <0x0 0x0 0x0 0x10000>; 204 interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; 205 resets = <&reset RESET_HDMITX_CAPB3>, 206 <&reset RESET_HDMITX_PHY>, 207 <&reset RESET_HDMITX>; 208 reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; 209 clocks = <&clkc CLKID_HDMI>, 210 <&clkc CLKID_HTX_PCLK>, 211 <&clkc CLKID_VPU_INTR>; 212 clock-names = "isfr", "iahb", "venci"; 213 #address-cells = <1>; 214 #size-cells = <0>; 215 #sound-dai-cells = <0>; 216 status = "disabled"; 217 218 /* VPU VENC Input */ 219 hdmi_tx_venc_port: port@0 { 220 reg = <0>; 221 222 hdmi_tx_in: endpoint { 223 remote-endpoint = <&hdmi_tx_out>; 224 }; 225 }; 226 227 /* TMDS Output */ 228 hdmi_tx_tmds_port: port@1 { 229 reg = <1>; 230 }; 231 }; 232 233 apb_efuse: bus@30000 { 234 compatible = "simple-bus"; 235 reg = <0x0 0x30000 0x0 0x2000>; 236 #address-cells = <2>; 237 #size-cells = <2>; 238 ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>; 239 240 hwrng: rng@218 { 241 compatible = "amlogic,meson-rng"; 242 reg = <0x0 0x218 0x0 0x4>; 243 clocks = <&clkc CLKID_RNG0>; 244 clock-names = "core"; 245 }; 246 }; 247 248 acodec: audio-controller@32000 { 249 compatible = "amlogic,t9015"; 250 reg = <0x0 0x32000 0x0 0x14>; 251 #sound-dai-cells = <0>; 252 sound-name-prefix = "ACODEC"; 253 clocks = <&clkc CLKID_AUDIO_CODEC>; 254 clock-names = "pclk"; 255 resets = <&reset RESET_AUDIO_CODEC>; 256 status = "disabled"; 257 }; 258 259 periphs: bus@34400 { 260 compatible = "simple-bus"; 261 reg = <0x0 0x34400 0x0 0x400>; 262 #address-cells = <2>; 263 #size-cells = <2>; 264 ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; 265 266 periphs_pinctrl: pinctrl@40 { 267 compatible = "amlogic,meson-g12a-periphs-pinctrl"; 268 #address-cells = <2>; 269 #size-cells = <2>; 270 ranges; 271 272 gpio: bank@40 { 273 reg = <0x0 0x40 0x0 0x4c>, 274 <0x0 0xe8 0x0 0x18>, 275 <0x0 0x120 0x0 0x18>, 276 <0x0 0x2c0 0x0 0x40>, 277 <0x0 0x340 0x0 0x1c>; 278 reg-names = "gpio", 279 "pull", 280 "pull-enable", 281 "mux", 282 "ds"; 283 gpio-controller; 284 #gpio-cells = <2>; 285 gpio-ranges = <&periphs_pinctrl 0 0 86>; 286 }; 287 288 cec_ao_a_h_pins: cec_ao_a_h { 289 mux { 290 groups = "cec_ao_a_h"; 291 function = "cec_ao_a_h"; 292 bias-disable; 293 }; 294 }; 295 296 cec_ao_b_h_pins: cec_ao_b_h { 297 mux { 298 groups = "cec_ao_b_h"; 299 function = "cec_ao_b_h"; 300 bias-disable; 301 }; 302 }; 303 304 emmc_ctrl_pins: emmc-ctrl { 305 mux-0 { 306 groups = "emmc_cmd"; 307 function = "emmc"; 308 bias-pull-up; 309 drive-strength-microamp = <4000>; 310 }; 311 312 mux-1 { 313 groups = "emmc_clk"; 314 function = "emmc"; 315 bias-disable; 316 drive-strength-microamp = <4000>; 317 }; 318 }; 319 320 emmc_data_4b_pins: emmc-data-4b { 321 mux-0 { 322 groups = "emmc_nand_d0", 323 "emmc_nand_d1", 324 "emmc_nand_d2", 325 "emmc_nand_d3"; 326 function = "emmc"; 327 bias-pull-up; 328 drive-strength-microamp = <4000>; 329 }; 330 }; 331 332 emmc_data_8b_pins: emmc-data-8b { 333 mux-0 { 334 groups = "emmc_nand_d0", 335 "emmc_nand_d1", 336 "emmc_nand_d2", 337 "emmc_nand_d3", 338 "emmc_nand_d4", 339 "emmc_nand_d5", 340 "emmc_nand_d6", 341 "emmc_nand_d7"; 342 function = "emmc"; 343 bias-pull-up; 344 drive-strength-microamp = <4000>; 345 }; 346 }; 347 348 emmc_ds_pins: emmc-ds { 349 mux { 350 groups = "emmc_nand_ds"; 351 function = "emmc"; 352 bias-pull-down; 353 drive-strength-microamp = <4000>; 354 }; 355 }; 356 357 emmc_clk_gate_pins: emmc_clk_gate { 358 mux { 359 groups = "BOOT_8"; 360 function = "gpio_periphs"; 361 bias-pull-down; 362 drive-strength-microamp = <4000>; 363 }; 364 }; 365 366 hdmitx_ddc_pins: hdmitx_ddc { 367 mux { 368 groups = "hdmitx_sda", 369 "hdmitx_sck"; 370 function = "hdmitx"; 371 bias-disable; 372 drive-strength-microamp = <4000>; 373 }; 374 }; 375 376 hdmitx_hpd_pins: hdmitx_hpd { 377 mux { 378 groups = "hdmitx_hpd_in"; 379 function = "hdmitx"; 380 bias-disable; 381 }; 382 }; 383 384 385 i2c0_sda_c_pins: i2c0-sda-c { 386 mux { 387 groups = "i2c0_sda_c"; 388 function = "i2c0"; 389 bias-disable; 390 drive-strength-microamp = <3000>; 391 392 }; 393 }; 394 395 i2c0_sck_c_pins: i2c0-sck-c { 396 mux { 397 groups = "i2c0_sck_c"; 398 function = "i2c0"; 399 bias-disable; 400 drive-strength-microamp = <3000>; 401 }; 402 }; 403 404 i2c0_sda_z0_pins: i2c0-sda-z0 { 405 mux { 406 groups = "i2c0_sda_z0"; 407 function = "i2c0"; 408 bias-disable; 409 drive-strength-microamp = <3000>; 410 }; 411 }; 412 413 i2c0_sck_z1_pins: i2c0-sck-z1 { 414 mux { 415 groups = "i2c0_sck_z1"; 416 function = "i2c0"; 417 bias-disable; 418 drive-strength-microamp = <3000>; 419 }; 420 }; 421 422 i2c0_sda_z7_pins: i2c0-sda-z7 { 423 mux { 424 groups = "i2c0_sda_z7"; 425 function = "i2c0"; 426 bias-disable; 427 drive-strength-microamp = <3000>; 428 }; 429 }; 430 431 i2c0_sda_z8_pins: i2c0-sda-z8 { 432 mux { 433 groups = "i2c0_sda_z8"; 434 function = "i2c0"; 435 bias-disable; 436 drive-strength-microamp = <3000>; 437 }; 438 }; 439 440 i2c1_sda_x_pins: i2c1-sda-x { 441 mux { 442 groups = "i2c1_sda_x"; 443 function = "i2c1"; 444 bias-disable; 445 drive-strength-microamp = <3000>; 446 }; 447 }; 448 449 i2c1_sck_x_pins: i2c1-sck-x { 450 mux { 451 groups = "i2c1_sck_x"; 452 function = "i2c1"; 453 bias-disable; 454 drive-strength-microamp = <3000>; 455 }; 456 }; 457 458 i2c1_sda_h2_pins: i2c1-sda-h2 { 459 mux { 460 groups = "i2c1_sda_h2"; 461 function = "i2c1"; 462 bias-disable; 463 drive-strength-microamp = <3000>; 464 }; 465 }; 466 467 i2c1_sck_h3_pins: i2c1-sck-h3 { 468 mux { 469 groups = "i2c1_sck_h3"; 470 function = "i2c1"; 471 bias-disable; 472 drive-strength-microamp = <3000>; 473 }; 474 }; 475 476 i2c1_sda_h6_pins: i2c1-sda-h6 { 477 mux { 478 groups = "i2c1_sda_h6"; 479 function = "i2c1"; 480 bias-disable; 481 drive-strength-microamp = <3000>; 482 }; 483 }; 484 485 i2c1_sck_h7_pins: i2c1-sck-h7 { 486 mux { 487 groups = "i2c1_sck_h7"; 488 function = "i2c1"; 489 bias-disable; 490 drive-strength-microamp = <3000>; 491 }; 492 }; 493 494 i2c2_sda_x_pins: i2c2-sda-x { 495 mux { 496 groups = "i2c2_sda_x"; 497 function = "i2c2"; 498 bias-disable; 499 drive-strength-microamp = <3000>; 500 }; 501 }; 502 503 i2c2_sck_x_pins: i2c2-sck-x { 504 mux { 505 groups = "i2c2_sck_x"; 506 function = "i2c2"; 507 bias-disable; 508 drive-strength-microamp = <3000>; 509 }; 510 }; 511 512 i2c2_sda_z_pins: i2c2-sda-z { 513 mux { 514 groups = "i2c2_sda_z"; 515 function = "i2c2"; 516 bias-disable; 517 drive-strength-microamp = <3000>; 518 }; 519 }; 520 521 i2c2_sck_z_pins: i2c2-sck-z { 522 mux { 523 groups = "i2c2_sck_z"; 524 function = "i2c2"; 525 bias-disable; 526 drive-strength-microamp = <3000>; 527 }; 528 }; 529 530 i2c3_sda_h_pins: i2c3-sda-h { 531 mux { 532 groups = "i2c3_sda_h"; 533 function = "i2c3"; 534 bias-disable; 535 drive-strength-microamp = <3000>; 536 }; 537 }; 538 539 i2c3_sck_h_pins: i2c3-sck-h { 540 mux { 541 groups = "i2c3_sck_h"; 542 function = "i2c3"; 543 bias-disable; 544 drive-strength-microamp = <3000>; 545 }; 546 }; 547 548 i2c3_sda_a_pins: i2c3-sda-a { 549 mux { 550 groups = "i2c3_sda_a"; 551 function = "i2c3"; 552 bias-disable; 553 drive-strength-microamp = <3000>; 554 }; 555 }; 556 557 i2c3_sck_a_pins: i2c3-sck-a { 558 mux { 559 groups = "i2c3_sck_a"; 560 function = "i2c3"; 561 bias-disable; 562 drive-strength-microamp = <3000>; 563 }; 564 }; 565 566 mclk0_a_pins: mclk0-a { 567 mux { 568 groups = "mclk0_a"; 569 function = "mclk0"; 570 bias-disable; 571 drive-strength-microamp = <3000>; 572 }; 573 }; 574 575 mclk1_a_pins: mclk1-a { 576 mux { 577 groups = "mclk1_a"; 578 function = "mclk1"; 579 bias-disable; 580 drive-strength-microamp = <3000>; 581 }; 582 }; 583 584 mclk1_x_pins: mclk1-x { 585 mux { 586 groups = "mclk1_x"; 587 function = "mclk1"; 588 bias-disable; 589 drive-strength-microamp = <3000>; 590 }; 591 }; 592 593 mclk1_z_pins: mclk1-z { 594 mux { 595 groups = "mclk1_z"; 596 function = "mclk1"; 597 bias-disable; 598 drive-strength-microamp = <3000>; 599 }; 600 }; 601 602 nor_pins: nor { 603 mux { 604 groups = "nor_d", 605 "nor_q", 606 "nor_c", 607 "nor_cs"; 608 function = "nor"; 609 bias-disable; 610 }; 611 }; 612 613 pdm_din0_a_pins: pdm-din0-a { 614 mux { 615 groups = "pdm_din0_a"; 616 function = "pdm"; 617 bias-disable; 618 }; 619 }; 620 621 pdm_din0_c_pins: pdm-din0-c { 622 mux { 623 groups = "pdm_din0_c"; 624 function = "pdm"; 625 bias-disable; 626 }; 627 }; 628 629 pdm_din0_x_pins: pdm-din0-x { 630 mux { 631 groups = "pdm_din0_x"; 632 function = "pdm"; 633 bias-disable; 634 }; 635 }; 636 637 pdm_din0_z_pins: pdm-din0-z { 638 mux { 639 groups = "pdm_din0_z"; 640 function = "pdm"; 641 bias-disable; 642 }; 643 }; 644 645 pdm_din1_a_pins: pdm-din1-a { 646 mux { 647 groups = "pdm_din1_a"; 648 function = "pdm"; 649 bias-disable; 650 }; 651 }; 652 653 pdm_din1_c_pins: pdm-din1-c { 654 mux { 655 groups = "pdm_din1_c"; 656 function = "pdm"; 657 bias-disable; 658 }; 659 }; 660 661 pdm_din1_x_pins: pdm-din1-x { 662 mux { 663 groups = "pdm_din1_x"; 664 function = "pdm"; 665 bias-disable; 666 }; 667 }; 668 669 pdm_din1_z_pins: pdm-din1-z { 670 mux { 671 groups = "pdm_din1_z"; 672 function = "pdm"; 673 bias-disable; 674 }; 675 }; 676 677 pdm_din2_a_pins: pdm-din2-a { 678 mux { 679 groups = "pdm_din2_a"; 680 function = "pdm"; 681 bias-disable; 682 }; 683 }; 684 685 pdm_din2_c_pins: pdm-din2-c { 686 mux { 687 groups = "pdm_din2_c"; 688 function = "pdm"; 689 bias-disable; 690 }; 691 }; 692 693 pdm_din2_x_pins: pdm-din2-x { 694 mux { 695 groups = "pdm_din2_x"; 696 function = "pdm"; 697 bias-disable; 698 }; 699 }; 700 701 pdm_din2_z_pins: pdm-din2-z { 702 mux { 703 groups = "pdm_din2_z"; 704 function = "pdm"; 705 bias-disable; 706 }; 707 }; 708 709 pdm_din3_a_pins: pdm-din3-a { 710 mux { 711 groups = "pdm_din3_a"; 712 function = "pdm"; 713 bias-disable; 714 }; 715 }; 716 717 pdm_din3_c_pins: pdm-din3-c { 718 mux { 719 groups = "pdm_din3_c"; 720 function = "pdm"; 721 bias-disable; 722 }; 723 }; 724 725 pdm_din3_x_pins: pdm-din3-x { 726 mux { 727 groups = "pdm_din3_x"; 728 function = "pdm"; 729 bias-disable; 730 }; 731 }; 732 733 pdm_din3_z_pins: pdm-din3-z { 734 mux { 735 groups = "pdm_din3_z"; 736 function = "pdm"; 737 bias-disable; 738 }; 739 }; 740 741 pdm_dclk_a_pins: pdm-dclk-a { 742 mux { 743 groups = "pdm_dclk_a"; 744 function = "pdm"; 745 bias-disable; 746 drive-strength-microamp = <500>; 747 }; 748 }; 749 750 pdm_dclk_c_pins: pdm-dclk-c { 751 mux { 752 groups = "pdm_dclk_c"; 753 function = "pdm"; 754 bias-disable; 755 drive-strength-microamp = <500>; 756 }; 757 }; 758 759 pdm_dclk_x_pins: pdm-dclk-x { 760 mux { 761 groups = "pdm_dclk_x"; 762 function = "pdm"; 763 bias-disable; 764 drive-strength-microamp = <500>; 765 }; 766 }; 767 768 pdm_dclk_z_pins: pdm-dclk-z { 769 mux { 770 groups = "pdm_dclk_z"; 771 function = "pdm"; 772 bias-disable; 773 drive-strength-microamp = <500>; 774 }; 775 }; 776 777 pwm_a_pins: pwm-a { 778 mux { 779 groups = "pwm_a"; 780 function = "pwm_a"; 781 bias-disable; 782 }; 783 }; 784 785 pwm_b_x7_pins: pwm-b-x7 { 786 mux { 787 groups = "pwm_b_x7"; 788 function = "pwm_b"; 789 bias-disable; 790 }; 791 }; 792 793 pwm_b_x19_pins: pwm-b-x19 { 794 mux { 795 groups = "pwm_b_x19"; 796 function = "pwm_b"; 797 bias-disable; 798 }; 799 }; 800 801 pwm_c_c_pins: pwm-c-c { 802 mux { 803 groups = "pwm_c_c"; 804 function = "pwm_c"; 805 bias-disable; 806 }; 807 }; 808 809 pwm_c_x5_pins: pwm-c-x5 { 810 mux { 811 groups = "pwm_c_x5"; 812 function = "pwm_c"; 813 bias-disable; 814 }; 815 }; 816 817 pwm_c_x8_pins: pwm-c-x8 { 818 mux { 819 groups = "pwm_c_x8"; 820 function = "pwm_c"; 821 bias-disable; 822 }; 823 }; 824 825 pwm_d_x3_pins: pwm-d-x3 { 826 mux { 827 groups = "pwm_d_x3"; 828 function = "pwm_d"; 829 bias-disable; 830 }; 831 }; 832 833 pwm_d_x6_pins: pwm-d-x6 { 834 mux { 835 groups = "pwm_d_x6"; 836 function = "pwm_d"; 837 bias-disable; 838 }; 839 }; 840 841 pwm_e_pins: pwm-e { 842 mux { 843 groups = "pwm_e"; 844 function = "pwm_e"; 845 bias-disable; 846 }; 847 }; 848 849 pwm_f_z_pins: pwm-f-z { 850 mux { 851 groups = "pwm_f_z"; 852 function = "pwm_f"; 853 bias-disable; 854 }; 855 }; 856 857 pwm_f_a_pins: pwm-f-a { 858 mux { 859 groups = "pwm_f_a"; 860 function = "pwm_f"; 861 bias-disable; 862 }; 863 }; 864 865 pwm_f_x_pins: pwm-f-x { 866 mux { 867 groups = "pwm_f_x"; 868 function = "pwm_f"; 869 bias-disable; 870 }; 871 }; 872 873 pwm_f_h_pins: pwm-f-h { 874 mux { 875 groups = "pwm_f_h"; 876 function = "pwm_f"; 877 bias-disable; 878 }; 879 }; 880 881 sdcard_c_pins: sdcard_c { 882 mux-0 { 883 groups = "sdcard_d0_c", 884 "sdcard_d1_c", 885 "sdcard_d2_c", 886 "sdcard_d3_c", 887 "sdcard_cmd_c"; 888 function = "sdcard"; 889 bias-pull-up; 890 drive-strength-microamp = <4000>; 891 }; 892 893 mux-1 { 894 groups = "sdcard_clk_c"; 895 function = "sdcard"; 896 bias-disable; 897 drive-strength-microamp = <4000>; 898 }; 899 }; 900 901 sdcard_clk_gate_c_pins: sdcard_clk_gate_c { 902 mux { 903 groups = "GPIOC_4"; 904 function = "gpio_periphs"; 905 bias-pull-down; 906 drive-strength-microamp = <4000>; 907 }; 908 }; 909 910 sdcard_z_pins: sdcard_z { 911 mux-0 { 912 groups = "sdcard_d0_z", 913 "sdcard_d1_z", 914 "sdcard_d2_z", 915 "sdcard_d3_z", 916 "sdcard_cmd_z"; 917 function = "sdcard"; 918 bias-pull-up; 919 drive-strength-microamp = <4000>; 920 }; 921 922 mux-1 { 923 groups = "sdcard_clk_z"; 924 function = "sdcard"; 925 bias-disable; 926 drive-strength-microamp = <4000>; 927 }; 928 }; 929 930 sdcard_clk_gate_z_pins: sdcard_clk_gate_z { 931 mux { 932 groups = "GPIOZ_6"; 933 function = "gpio_periphs"; 934 bias-pull-down; 935 drive-strength-microamp = <4000>; 936 }; 937 }; 938 939 sdio_pins: sdio { 940 mux { 941 groups = "sdio_d0", 942 "sdio_d1", 943 "sdio_d2", 944 "sdio_d3", 945 "sdio_clk", 946 "sdio_cmd"; 947 function = "sdio"; 948 bias-disable; 949 drive-strength-microamp = <4000>; 950 }; 951 }; 952 953 sdio_clk_gate_pins: sdio_clk_gate { 954 mux { 955 groups = "GPIOX_4"; 956 function = "gpio_periphs"; 957 bias-pull-down; 958 drive-strength-microamp = <4000>; 959 }; 960 }; 961 962 spdif_in_a10_pins: spdif-in-a10 { 963 mux { 964 groups = "spdif_in_a10"; 965 function = "spdif_in"; 966 bias-disable; 967 }; 968 }; 969 970 spdif_in_a12_pins: spdif-in-a12 { 971 mux { 972 groups = "spdif_in_a12"; 973 function = "spdif_in"; 974 bias-disable; 975 }; 976 }; 977 978 spdif_in_h_pins: spdif-in-h { 979 mux { 980 groups = "spdif_in_h"; 981 function = "spdif_in"; 982 bias-disable; 983 }; 984 }; 985 986 spdif_out_h_pins: spdif-out-h { 987 mux { 988 groups = "spdif_out_h"; 989 function = "spdif_out"; 990 drive-strength-microamp = <500>; 991 bias-disable; 992 }; 993 }; 994 995 spdif_out_a11_pins: spdif-out-a11 { 996 mux { 997 groups = "spdif_out_a11"; 998 function = "spdif_out"; 999 drive-strength-microamp = <500>; 1000 bias-disable; 1001 }; 1002 }; 1003 1004 spdif_out_a13_pins: spdif-out-a13 { 1005 mux { 1006 groups = "spdif_out_a13"; 1007 function = "spdif_out"; 1008 drive-strength-microamp = <500>; 1009 bias-disable; 1010 }; 1011 }; 1012 1013 spicc0_x_pins: spicc0-x { 1014 mux { 1015 groups = "spi0_mosi_x", 1016 "spi0_miso_x", 1017 "spi0_clk_x"; 1018 function = "spi0"; 1019 drive-strength-microamp = <4000>; 1020 bias-disable; 1021 }; 1022 }; 1023 1024 spicc0_ss0_x_pins: spicc0-ss0-x { 1025 mux { 1026 groups = "spi0_ss0_x"; 1027 function = "spi0"; 1028 drive-strength-microamp = <4000>; 1029 bias-disable; 1030 }; 1031 }; 1032 1033 spicc0_c_pins: spicc0-c { 1034 mux { 1035 groups = "spi0_mosi_c", 1036 "spi0_miso_c", 1037 "spi0_ss0_c", 1038 "spi0_clk_c"; 1039 function = "spi0"; 1040 drive-strength-microamp = <4000>; 1041 bias-disable; 1042 }; 1043 }; 1044 1045 spicc1_pins: spicc1 { 1046 mux { 1047 groups = "spi1_mosi", 1048 "spi1_miso", 1049 "spi1_clk"; 1050 function = "spi1"; 1051 drive-strength-microamp = <4000>; 1052 }; 1053 }; 1054 1055 spicc1_ss0_pins: spicc1-ss0 { 1056 mux { 1057 groups = "spi1_ss0"; 1058 function = "spi1"; 1059 drive-strength-microamp = <4000>; 1060 bias-disable; 1061 }; 1062 }; 1063 1064 tdm_a_din0_pins: tdm-a-din0 { 1065 mux { 1066 groups = "tdm_a_din0"; 1067 function = "tdm_a"; 1068 bias-disable; 1069 }; 1070 }; 1071 1072 1073 tdm_a_din1_pins: tdm-a-din1 { 1074 mux { 1075 groups = "tdm_a_din1"; 1076 function = "tdm_a"; 1077 bias-disable; 1078 }; 1079 }; 1080 1081 tdm_a_dout0_pins: tdm-a-dout0 { 1082 mux { 1083 groups = "tdm_a_dout0"; 1084 function = "tdm_a"; 1085 bias-disable; 1086 drive-strength-microamp = <3000>; 1087 }; 1088 }; 1089 1090 tdm_a_dout1_pins: tdm-a-dout1 { 1091 mux { 1092 groups = "tdm_a_dout1"; 1093 function = "tdm_a"; 1094 bias-disable; 1095 drive-strength-microamp = <3000>; 1096 }; 1097 }; 1098 1099 tdm_a_fs_pins: tdm-a-fs { 1100 mux { 1101 groups = "tdm_a_fs"; 1102 function = "tdm_a"; 1103 bias-disable; 1104 drive-strength-microamp = <3000>; 1105 }; 1106 }; 1107 1108 tdm_a_sclk_pins: tdm-a-sclk { 1109 mux { 1110 groups = "tdm_a_sclk"; 1111 function = "tdm_a"; 1112 bias-disable; 1113 drive-strength-microamp = <3000>; 1114 }; 1115 }; 1116 1117 tdm_a_slv_fs_pins: tdm-a-slv-fs { 1118 mux { 1119 groups = "tdm_a_slv_fs"; 1120 function = "tdm_a"; 1121 bias-disable; 1122 }; 1123 }; 1124 1125 1126 tdm_a_slv_sclk_pins: tdm-a-slv-sclk { 1127 mux { 1128 groups = "tdm_a_slv_sclk"; 1129 function = "tdm_a"; 1130 bias-disable; 1131 }; 1132 }; 1133 1134 tdm_b_din0_pins: tdm-b-din0 { 1135 mux { 1136 groups = "tdm_b_din0"; 1137 function = "tdm_b"; 1138 bias-disable; 1139 }; 1140 }; 1141 1142 tdm_b_din1_pins: tdm-b-din1 { 1143 mux { 1144 groups = "tdm_b_din1"; 1145 function = "tdm_b"; 1146 bias-disable; 1147 }; 1148 }; 1149 1150 tdm_b_din2_pins: tdm-b-din2 { 1151 mux { 1152 groups = "tdm_b_din2"; 1153 function = "tdm_b"; 1154 bias-disable; 1155 }; 1156 }; 1157 1158 tdm_b_din3_a_pins: tdm-b-din3-a { 1159 mux { 1160 groups = "tdm_b_din3_a"; 1161 function = "tdm_b"; 1162 bias-disable; 1163 }; 1164 }; 1165 1166 tdm_b_din3_h_pins: tdm-b-din3-h { 1167 mux { 1168 groups = "tdm_b_din3_h"; 1169 function = "tdm_b"; 1170 bias-disable; 1171 }; 1172 }; 1173 1174 tdm_b_dout0_pins: tdm-b-dout0 { 1175 mux { 1176 groups = "tdm_b_dout0"; 1177 function = "tdm_b"; 1178 bias-disable; 1179 drive-strength-microamp = <3000>; 1180 }; 1181 }; 1182 1183 tdm_b_dout1_pins: tdm-b-dout1 { 1184 mux { 1185 groups = "tdm_b_dout1"; 1186 function = "tdm_b"; 1187 bias-disable; 1188 drive-strength-microamp = <3000>; 1189 }; 1190 }; 1191 1192 tdm_b_dout2_pins: tdm-b-dout2 { 1193 mux { 1194 groups = "tdm_b_dout2"; 1195 function = "tdm_b"; 1196 bias-disable; 1197 drive-strength-microamp = <3000>; 1198 }; 1199 }; 1200 1201 tdm_b_dout3_a_pins: tdm-b-dout3-a { 1202 mux { 1203 groups = "tdm_b_dout3_a"; 1204 function = "tdm_b"; 1205 bias-disable; 1206 drive-strength-microamp = <3000>; 1207 }; 1208 }; 1209 1210 tdm_b_dout3_h_pins: tdm-b-dout3-h { 1211 mux { 1212 groups = "tdm_b_dout3_h"; 1213 function = "tdm_b"; 1214 bias-disable; 1215 drive-strength-microamp = <3000>; 1216 }; 1217 }; 1218 1219 tdm_b_fs_pins: tdm-b-fs { 1220 mux { 1221 groups = "tdm_b_fs"; 1222 function = "tdm_b"; 1223 bias-disable; 1224 drive-strength-microamp = <3000>; 1225 }; 1226 }; 1227 1228 tdm_b_sclk_pins: tdm-b-sclk { 1229 mux { 1230 groups = "tdm_b_sclk"; 1231 function = "tdm_b"; 1232 bias-disable; 1233 drive-strength-microamp = <3000>; 1234 }; 1235 }; 1236 1237 tdm_b_slv_fs_pins: tdm-b-slv-fs { 1238 mux { 1239 groups = "tdm_b_slv_fs"; 1240 function = "tdm_b"; 1241 bias-disable; 1242 }; 1243 }; 1244 1245 tdm_b_slv_sclk_pins: tdm-b-slv-sclk { 1246 mux { 1247 groups = "tdm_b_slv_sclk"; 1248 function = "tdm_b"; 1249 bias-disable; 1250 }; 1251 }; 1252 1253 tdm_c_din0_a_pins: tdm-c-din0-a { 1254 mux { 1255 groups = "tdm_c_din0_a"; 1256 function = "tdm_c"; 1257 bias-disable; 1258 }; 1259 }; 1260 1261 tdm_c_din0_z_pins: tdm-c-din0-z { 1262 mux { 1263 groups = "tdm_c_din0_z"; 1264 function = "tdm_c"; 1265 bias-disable; 1266 }; 1267 }; 1268 1269 tdm_c_din1_a_pins: tdm-c-din1-a { 1270 mux { 1271 groups = "tdm_c_din1_a"; 1272 function = "tdm_c"; 1273 bias-disable; 1274 }; 1275 }; 1276 1277 tdm_c_din1_z_pins: tdm-c-din1-z { 1278 mux { 1279 groups = "tdm_c_din1_z"; 1280 function = "tdm_c"; 1281 bias-disable; 1282 }; 1283 }; 1284 1285 tdm_c_din2_a_pins: tdm-c-din2-a { 1286 mux { 1287 groups = "tdm_c_din2_a"; 1288 function = "tdm_c"; 1289 bias-disable; 1290 }; 1291 }; 1292 1293 eth_leds_pins: eth-leds { 1294 mux { 1295 groups = "eth_link_led", 1296 "eth_act_led"; 1297 function = "eth"; 1298 bias-disable; 1299 }; 1300 }; 1301 1302 eth_pins: eth { 1303 mux { 1304 groups = "eth_mdio", 1305 "eth_mdc", 1306 "eth_rgmii_rx_clk", 1307 "eth_rx_dv", 1308 "eth_rxd0", 1309 "eth_rxd1", 1310 "eth_txen", 1311 "eth_txd0", 1312 "eth_txd1"; 1313 function = "eth"; 1314 drive-strength-microamp = <4000>; 1315 bias-disable; 1316 }; 1317 }; 1318 1319 eth_rgmii_pins: eth-rgmii { 1320 mux { 1321 groups = "eth_rxd2_rgmii", 1322 "eth_rxd3_rgmii", 1323 "eth_rgmii_tx_clk", 1324 "eth_txd2_rgmii", 1325 "eth_txd3_rgmii"; 1326 function = "eth"; 1327 drive-strength-microamp = <4000>; 1328 bias-disable; 1329 }; 1330 }; 1331 1332 tdm_c_din2_z_pins: tdm-c-din2-z { 1333 mux { 1334 groups = "tdm_c_din2_z"; 1335 function = "tdm_c"; 1336 bias-disable; 1337 }; 1338 }; 1339 1340 tdm_c_din3_a_pins: tdm-c-din3-a { 1341 mux { 1342 groups = "tdm_c_din3_a"; 1343 function = "tdm_c"; 1344 bias-disable; 1345 }; 1346 }; 1347 1348 tdm_c_din3_z_pins: tdm-c-din3-z { 1349 mux { 1350 groups = "tdm_c_din3_z"; 1351 function = "tdm_c"; 1352 bias-disable; 1353 }; 1354 }; 1355 1356 tdm_c_dout0_a_pins: tdm-c-dout0-a { 1357 mux { 1358 groups = "tdm_c_dout0_a"; 1359 function = "tdm_c"; 1360 bias-disable; 1361 drive-strength-microamp = <3000>; 1362 }; 1363 }; 1364 1365 tdm_c_dout0_z_pins: tdm-c-dout0-z { 1366 mux { 1367 groups = "tdm_c_dout0_z"; 1368 function = "tdm_c"; 1369 bias-disable; 1370 drive-strength-microamp = <3000>; 1371 }; 1372 }; 1373 1374 tdm_c_dout1_a_pins: tdm-c-dout1-a { 1375 mux { 1376 groups = "tdm_c_dout1_a"; 1377 function = "tdm_c"; 1378 bias-disable; 1379 drive-strength-microamp = <3000>; 1380 }; 1381 }; 1382 1383 tdm_c_dout1_z_pins: tdm-c-dout1-z { 1384 mux { 1385 groups = "tdm_c_dout1_z"; 1386 function = "tdm_c"; 1387 bias-disable; 1388 drive-strength-microamp = <3000>; 1389 }; 1390 }; 1391 1392 tdm_c_dout2_a_pins: tdm-c-dout2-a { 1393 mux { 1394 groups = "tdm_c_dout2_a"; 1395 function = "tdm_c"; 1396 bias-disable; 1397 drive-strength-microamp = <3000>; 1398 }; 1399 }; 1400 1401 tdm_c_dout2_z_pins: tdm-c-dout2-z { 1402 mux { 1403 groups = "tdm_c_dout2_z"; 1404 function = "tdm_c"; 1405 bias-disable; 1406 drive-strength-microamp = <3000>; 1407 }; 1408 }; 1409 1410 tdm_c_dout3_a_pins: tdm-c-dout3-a { 1411 mux { 1412 groups = "tdm_c_dout3_a"; 1413 function = "tdm_c"; 1414 bias-disable; 1415 drive-strength-microamp = <3000>; 1416 }; 1417 }; 1418 1419 tdm_c_dout3_z_pins: tdm-c-dout3-z { 1420 mux { 1421 groups = "tdm_c_dout3_z"; 1422 function = "tdm_c"; 1423 bias-disable; 1424 drive-strength-microamp = <3000>; 1425 }; 1426 }; 1427 1428 tdm_c_fs_a_pins: tdm-c-fs-a { 1429 mux { 1430 groups = "tdm_c_fs_a"; 1431 function = "tdm_c"; 1432 bias-disable; 1433 drive-strength-microamp = <3000>; 1434 }; 1435 }; 1436 1437 tdm_c_fs_z_pins: tdm-c-fs-z { 1438 mux { 1439 groups = "tdm_c_fs_z"; 1440 function = "tdm_c"; 1441 bias-disable; 1442 drive-strength-microamp = <3000>; 1443 }; 1444 }; 1445 1446 tdm_c_sclk_a_pins: tdm-c-sclk-a { 1447 mux { 1448 groups = "tdm_c_sclk_a"; 1449 function = "tdm_c"; 1450 bias-disable; 1451 drive-strength-microamp = <3000>; 1452 }; 1453 }; 1454 1455 tdm_c_sclk_z_pins: tdm-c-sclk-z { 1456 mux { 1457 groups = "tdm_c_sclk_z"; 1458 function = "tdm_c"; 1459 bias-disable; 1460 drive-strength-microamp = <3000>; 1461 }; 1462 }; 1463 1464 tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a { 1465 mux { 1466 groups = "tdm_c_slv_fs_a"; 1467 function = "tdm_c"; 1468 bias-disable; 1469 }; 1470 }; 1471 1472 tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z { 1473 mux { 1474 groups = "tdm_c_slv_fs_z"; 1475 function = "tdm_c"; 1476 bias-disable; 1477 }; 1478 }; 1479 1480 tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a { 1481 mux { 1482 groups = "tdm_c_slv_sclk_a"; 1483 function = "tdm_c"; 1484 bias-disable; 1485 }; 1486 }; 1487 1488 tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z { 1489 mux { 1490 groups = "tdm_c_slv_sclk_z"; 1491 function = "tdm_c"; 1492 bias-disable; 1493 }; 1494 }; 1495 1496 uart_a_pins: uart-a { 1497 mux { 1498 groups = "uart_a_tx", 1499 "uart_a_rx"; 1500 function = "uart_a"; 1501 bias-disable; 1502 }; 1503 }; 1504 1505 uart_a_cts_rts_pins: uart-a-cts-rts { 1506 mux { 1507 groups = "uart_a_cts", 1508 "uart_a_rts"; 1509 function = "uart_a"; 1510 bias-disable; 1511 }; 1512 }; 1513 1514 uart_b_pins: uart-b { 1515 mux { 1516 groups = "uart_b_tx", 1517 "uart_b_rx"; 1518 function = "uart_b"; 1519 bias-disable; 1520 }; 1521 }; 1522 1523 uart_c_pins: uart-c { 1524 mux { 1525 groups = "uart_c_tx", 1526 "uart_c_rx"; 1527 function = "uart_c"; 1528 bias-disable; 1529 }; 1530 }; 1531 1532 uart_c_cts_rts_pins: uart-c-cts-rts { 1533 mux { 1534 groups = "uart_c_cts", 1535 "uart_c_rts"; 1536 function = "uart_c"; 1537 bias-disable; 1538 }; 1539 }; 1540 }; 1541 }; 1542 1543 cpu_temp: temperature-sensor@34800 { 1544 compatible = "amlogic,g12a-cpu-thermal", 1545 "amlogic,g12a-thermal"; 1546 reg = <0x0 0x34800 0x0 0x50>; 1547 interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; 1548 clocks = <&clkc CLKID_TS>; 1549 #thermal-sensor-cells = <0>; 1550 amlogic,ao-secure = <&sec_AO>; 1551 }; 1552 1553 ddr_temp: temperature-sensor@34c00 { 1554 compatible = "amlogic,g12a-ddr-thermal", 1555 "amlogic,g12a-thermal"; 1556 reg = <0x0 0x34c00 0x0 0x50>; 1557 interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>; 1558 clocks = <&clkc CLKID_TS>; 1559 #thermal-sensor-cells = <0>; 1560 amlogic,ao-secure = <&sec_AO>; 1561 }; 1562 1563 usb2_phy0: phy@36000 { 1564 compatible = "amlogic,g12a-usb2-phy"; 1565 reg = <0x0 0x36000 0x0 0x2000>; 1566 clocks = <&xtal>; 1567 clock-names = "xtal"; 1568 resets = <&reset RESET_USB_PHY20>; 1569 reset-names = "phy"; 1570 #phy-cells = <0>; 1571 }; 1572 1573 dmc: bus@38000 { 1574 compatible = "simple-bus"; 1575 #address-cells = <2>; 1576 #size-cells = <2>; 1577 ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>; 1578 1579 canvas: video-lut@48 { 1580 compatible = "amlogic,canvas"; 1581 reg = <0x0 0x48 0x0 0x14>; 1582 }; 1583 1584 pmu: pmu@80 { 1585 reg = <0x0 0x80 0x0 0x40>, 1586 <0x0 0xc00 0x0 0x40>; 1587 interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>; 1588 }; 1589 }; 1590 1591 usb2_phy1: phy@3a000 { 1592 compatible = "amlogic,g12a-usb2-phy"; 1593 reg = <0x0 0x3a000 0x0 0x2000>; 1594 clocks = <&xtal>; 1595 clock-names = "xtal"; 1596 resets = <&reset RESET_USB_PHY21>; 1597 reset-names = "phy"; 1598 #phy-cells = <0>; 1599 }; 1600 1601 hiu: bus@3c000 { 1602 compatible = "simple-bus"; 1603 reg = <0x0 0x3c000 0x0 0x1400>; 1604 #address-cells = <2>; 1605 #size-cells = <2>; 1606 ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; 1607 1608 hhi: system-controller@0 { 1609 compatible = "amlogic,meson-gx-hhi-sysctrl", 1610 "simple-mfd", "syscon"; 1611 reg = <0 0 0 0x400>; 1612 1613 clkc: clock-controller { 1614 compatible = "amlogic,g12a-clkc"; 1615 #clock-cells = <1>; 1616 clocks = <&xtal>; 1617 clock-names = "xtal"; 1618 }; 1619 1620 pwrc: power-controller { 1621 compatible = "amlogic,meson-g12a-pwrc"; 1622 #power-domain-cells = <1>; 1623 amlogic,ao-sysctrl = <&rti>; 1624 resets = <&reset RESET_VIU>, 1625 <&reset RESET_VENC>, 1626 <&reset RESET_VCBUS>, 1627 <&reset RESET_BT656>, 1628 <&reset RESET_RDMA>, 1629 <&reset RESET_VENCI>, 1630 <&reset RESET_VENCP>, 1631 <&reset RESET_VDAC>, 1632 <&reset RESET_VDI6>, 1633 <&reset RESET_VENCL>, 1634 <&reset RESET_VID_LOCK>; 1635 reset-names = "viu", "venc", "vcbus", "bt656", 1636 "rdma", "venci", "vencp", "vdac", 1637 "vdi6", "vencl", "vid_lock"; 1638 clocks = <&clkc CLKID_VPU>, 1639 <&clkc CLKID_VAPB>; 1640 clock-names = "vpu", "vapb"; 1641 /* 1642 * VPU clocking is provided by two identical clock paths 1643 * VPU_0 and VPU_1 muxed to a single clock by a glitch 1644 * free mux to safely change frequency while running. 1645 * Same for VAPB but with a final gate after the glitch free mux. 1646 */ 1647 assigned-clocks = <&clkc CLKID_VPU_0_SEL>, 1648 <&clkc CLKID_VPU_0>, 1649 <&clkc CLKID_VPU>, /* Glitch free mux */ 1650 <&clkc CLKID_VAPB_0_SEL>, 1651 <&clkc CLKID_VAPB_0>, 1652 <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ 1653 assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, 1654 <0>, /* Do Nothing */ 1655 <&clkc CLKID_VPU_0>, 1656 <&clkc CLKID_FCLK_DIV4>, 1657 <0>, /* Do Nothing */ 1658 <&clkc CLKID_VAPB_0>; 1659 assigned-clock-rates = <0>, /* Do Nothing */ 1660 <666666666>, 1661 <0>, /* Do Nothing */ 1662 <0>, /* Do Nothing */ 1663 <250000000>, 1664 <0>; /* Do Nothing */ 1665 }; 1666 }; 1667 }; 1668 1669 usb3_pcie_phy: phy@46000 { 1670 compatible = "amlogic,g12a-usb3-pcie-phy"; 1671 reg = <0x0 0x46000 0x0 0x2000>; 1672 clocks = <&clkc CLKID_PCIE_PLL>; 1673 clock-names = "ref_clk"; 1674 resets = <&reset RESET_PCIE_PHY>; 1675 reset-names = "phy"; 1676 assigned-clocks = <&clkc CLKID_PCIE_PLL>; 1677 assigned-clock-rates = <100000000>; 1678 #phy-cells = <1>; 1679 }; 1680 1681 eth_phy: mdio-multiplexer@4c000 { 1682 compatible = "amlogic,g12a-mdio-mux"; 1683 reg = <0x0 0x4c000 0x0 0xa4>; 1684 clocks = <&clkc CLKID_ETH_PHY>, 1685 <&xtal>, 1686 <&clkc CLKID_MPLL_50M>; 1687 clock-names = "pclk", "clkin0", "clkin1"; 1688 mdio-parent-bus = <&mdio0>; 1689 #address-cells = <1>; 1690 #size-cells = <0>; 1691 1692 ext_mdio: mdio@0 { 1693 reg = <0>; 1694 #address-cells = <1>; 1695 #size-cells = <0>; 1696 }; 1697 1698 int_mdio: mdio@1 { 1699 reg = <1>; 1700 #address-cells = <1>; 1701 #size-cells = <0>; 1702 1703 internal_ephy: ethernet-phy@8 { 1704 compatible = "ethernet-phy-id0180.3301", 1705 "ethernet-phy-ieee802.3-c22"; 1706 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 1707 reg = <8>; 1708 max-speed = <100>; 1709 }; 1710 }; 1711 }; 1712 }; 1713 1714 aobus: bus@ff800000 { 1715 compatible = "simple-bus"; 1716 reg = <0x0 0xff800000 0x0 0x100000>; 1717 #address-cells = <2>; 1718 #size-cells = <2>; 1719 ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; 1720 1721 rti: sys-ctrl@0 { 1722 compatible = "amlogic,meson-gx-ao-sysctrl", 1723 "simple-mfd", "syscon"; 1724 reg = <0x0 0x0 0x0 0x100>; 1725 #address-cells = <2>; 1726 #size-cells = <2>; 1727 ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; 1728 1729 clkc_AO: clock-controller { 1730 compatible = "amlogic,meson-g12a-aoclkc"; 1731 #clock-cells = <1>; 1732 #reset-cells = <1>; 1733 clocks = <&xtal>, <&clkc CLKID_CLK81>; 1734 clock-names = "xtal", "mpeg-clk"; 1735 }; 1736 1737 ao_pinctrl: pinctrl { 1738 compatible = "amlogic,meson-g12a-aobus-pinctrl"; 1739 #address-cells = <2>; 1740 #size-cells = <2>; 1741 ranges; 1742 1743 gpio_ao: bank@14 { 1744 reg = <0x0 0x14 0x0 0x8>, 1745 <0x0 0x1c 0x0 0x8>, 1746 <0x0 0x24 0x0 0x14>; 1747 reg-names = "mux", 1748 "ds", 1749 "gpio"; 1750 gpio-controller; 1751 #gpio-cells = <2>; 1752 gpio-ranges = <&ao_pinctrl 0 0 15>; 1753 }; 1754 1755 i2c_ao_sck_pins: i2c_ao_sck_pins { 1756 mux { 1757 groups = "i2c_ao_sck"; 1758 function = "i2c_ao"; 1759 bias-disable; 1760 drive-strength-microamp = <3000>; 1761 }; 1762 }; 1763 1764 i2c_ao_sda_pins: i2c_ao_sda { 1765 mux { 1766 groups = "i2c_ao_sda"; 1767 function = "i2c_ao"; 1768 bias-disable; 1769 drive-strength-microamp = <3000>; 1770 }; 1771 }; 1772 1773 i2c_ao_sck_e_pins: i2c_ao_sck_e { 1774 mux { 1775 groups = "i2c_ao_sck_e"; 1776 function = "i2c_ao"; 1777 bias-disable; 1778 drive-strength-microamp = <3000>; 1779 }; 1780 }; 1781 1782 i2c_ao_sda_e_pins: i2c_ao_sda_e { 1783 mux { 1784 groups = "i2c_ao_sda_e"; 1785 function = "i2c_ao"; 1786 bias-disable; 1787 drive-strength-microamp = <3000>; 1788 }; 1789 }; 1790 1791 mclk0_ao_pins: mclk0-ao { 1792 mux { 1793 groups = "mclk0_ao"; 1794 function = "mclk0_ao"; 1795 bias-disable; 1796 drive-strength-microamp = <3000>; 1797 }; 1798 }; 1799 1800 tdm_ao_b_din0_pins: tdm-ao-b-din0 { 1801 mux { 1802 groups = "tdm_ao_b_din0"; 1803 function = "tdm_ao_b"; 1804 bias-disable; 1805 }; 1806 }; 1807 1808 spdif_ao_out_pins: spdif-ao-out { 1809 mux { 1810 groups = "spdif_ao_out"; 1811 function = "spdif_ao_out"; 1812 drive-strength-microamp = <500>; 1813 bias-disable; 1814 }; 1815 }; 1816 1817 tdm_ao_b_din1_pins: tdm-ao-b-din1 { 1818 mux { 1819 groups = "tdm_ao_b_din1"; 1820 function = "tdm_ao_b"; 1821 bias-disable; 1822 }; 1823 }; 1824 1825 tdm_ao_b_din2_pins: tdm-ao-b-din2 { 1826 mux { 1827 groups = "tdm_ao_b_din2"; 1828 function = "tdm_ao_b"; 1829 bias-disable; 1830 }; 1831 }; 1832 1833 tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { 1834 mux { 1835 groups = "tdm_ao_b_dout0"; 1836 function = "tdm_ao_b"; 1837 bias-disable; 1838 drive-strength-microamp = <3000>; 1839 }; 1840 }; 1841 1842 tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { 1843 mux { 1844 groups = "tdm_ao_b_dout1"; 1845 function = "tdm_ao_b"; 1846 bias-disable; 1847 drive-strength-microamp = <3000>; 1848 }; 1849 }; 1850 1851 tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { 1852 mux { 1853 groups = "tdm_ao_b_dout2"; 1854 function = "tdm_ao_b"; 1855 bias-disable; 1856 drive-strength-microamp = <3000>; 1857 }; 1858 }; 1859 1860 tdm_ao_b_fs_pins: tdm-ao-b-fs { 1861 mux { 1862 groups = "tdm_ao_b_fs"; 1863 function = "tdm_ao_b"; 1864 bias-disable; 1865 drive-strength-microamp = <3000>; 1866 }; 1867 }; 1868 1869 tdm_ao_b_sclk_pins: tdm-ao-b-sclk { 1870 mux { 1871 groups = "tdm_ao_b_sclk"; 1872 function = "tdm_ao_b"; 1873 bias-disable; 1874 drive-strength-microamp = <3000>; 1875 }; 1876 }; 1877 1878 tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { 1879 mux { 1880 groups = "tdm_ao_b_slv_fs"; 1881 function = "tdm_ao_b"; 1882 bias-disable; 1883 }; 1884 }; 1885 1886 tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { 1887 mux { 1888 groups = "tdm_ao_b_slv_sclk"; 1889 function = "tdm_ao_b"; 1890 bias-disable; 1891 }; 1892 }; 1893 1894 uart_ao_a_pins: uart-a-ao { 1895 mux { 1896 groups = "uart_ao_a_tx", 1897 "uart_ao_a_rx"; 1898 function = "uart_ao_a"; 1899 bias-disable; 1900 }; 1901 }; 1902 1903 uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { 1904 mux { 1905 groups = "uart_ao_a_cts", 1906 "uart_ao_a_rts"; 1907 function = "uart_ao_a"; 1908 bias-disable; 1909 }; 1910 }; 1911 1912 uart_ao_b_2_3_pins: uart-ao-b-2-3 { 1913 mux { 1914 groups = "uart_ao_b_tx_2", 1915 "uart_ao_b_rx_3"; 1916 function = "uart_ao_b"; 1917 bias-disable; 1918 }; 1919 }; 1920 1921 uart_ao_b_8_9_pins: uart-ao-b-8-9 { 1922 mux { 1923 groups = "uart_ao_b_tx_8", 1924 "uart_ao_b_rx_9"; 1925 function = "uart_ao_b"; 1926 bias-disable; 1927 }; 1928 }; 1929 1930 uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts { 1931 mux { 1932 groups = "uart_ao_b_cts", 1933 "uart_ao_b_rts"; 1934 function = "uart_ao_b"; 1935 bias-disable; 1936 }; 1937 }; 1938 1939 pwm_a_e_pins: pwm-a-e { 1940 mux { 1941 groups = "pwm_a_e"; 1942 function = "pwm_a_e"; 1943 bias-disable; 1944 }; 1945 }; 1946 1947 pwm_ao_a_pins: pwm-ao-a { 1948 mux { 1949 groups = "pwm_ao_a"; 1950 function = "pwm_ao_a"; 1951 bias-disable; 1952 }; 1953 }; 1954 1955 pwm_ao_b_pins: pwm-ao-b { 1956 mux { 1957 groups = "pwm_ao_b"; 1958 function = "pwm_ao_b"; 1959 bias-disable; 1960 }; 1961 }; 1962 1963 pwm_ao_c_4_pins: pwm-ao-c-4 { 1964 mux { 1965 groups = "pwm_ao_c_4"; 1966 function = "pwm_ao_c"; 1967 bias-disable; 1968 }; 1969 }; 1970 1971 pwm_ao_c_6_pins: pwm-ao-c-6 { 1972 mux { 1973 groups = "pwm_ao_c_6"; 1974 function = "pwm_ao_c"; 1975 bias-disable; 1976 }; 1977 }; 1978 1979 pwm_ao_d_5_pins: pwm-ao-d-5 { 1980 mux { 1981 groups = "pwm_ao_d_5"; 1982 function = "pwm_ao_d"; 1983 bias-disable; 1984 }; 1985 }; 1986 1987 pwm_ao_d_10_pins: pwm-ao-d-10 { 1988 mux { 1989 groups = "pwm_ao_d_10"; 1990 function = "pwm_ao_d"; 1991 bias-disable; 1992 }; 1993 }; 1994 1995 pwm_ao_d_e_pins: pwm-ao-d-e { 1996 mux { 1997 groups = "pwm_ao_d_e"; 1998 function = "pwm_ao_d"; 1999 }; 2000 }; 2001 2002 remote_input_ao_pins: remote-input-ao { 2003 mux { 2004 groups = "remote_ao_input"; 2005 function = "remote_ao_input"; 2006 bias-disable; 2007 }; 2008 }; 2009 }; 2010 }; 2011 2012 vrtc: rtc@a8 { 2013 compatible = "amlogic,meson-vrtc"; 2014 reg = <0x0 0x000a8 0x0 0x4>; 2015 }; 2016 2017 cec_AO: cec@100 { 2018 compatible = "amlogic,meson-gx-ao-cec"; 2019 reg = <0x0 0x00100 0x0 0x14>; 2020 interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; 2021 clocks = <&clkc_AO CLKID_AO_CEC>; 2022 clock-names = "core"; 2023 status = "disabled"; 2024 }; 2025 2026 sec_AO: ao-secure@140 { 2027 compatible = "amlogic,meson-gx-ao-secure", "syscon"; 2028 reg = <0x0 0x140 0x0 0x140>; 2029 amlogic,has-chip-id; 2030 }; 2031 2032 cecb_AO: cec@280 { 2033 compatible = "amlogic,meson-g12a-ao-cec"; 2034 reg = <0x0 0x00280 0x0 0x1c>; 2035 interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; 2036 clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>; 2037 clock-names = "oscin"; 2038 status = "disabled"; 2039 }; 2040 2041 pwm_AO_cd: pwm@2000 { 2042 compatible = "amlogic,meson-g12a-ao-pwm-cd"; 2043 reg = <0x0 0x2000 0x0 0x20>; 2044 #pwm-cells = <3>; 2045 status = "disabled"; 2046 }; 2047 2048 uart_AO: serial@3000 { 2049 compatible = "amlogic,meson-g12a-uart", 2050 "amlogic,meson-gx-uart", 2051 "amlogic,meson-ao-uart"; 2052 reg = <0x0 0x3000 0x0 0x18>; 2053 interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; 2054 clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>; 2055 clock-names = "xtal", "pclk", "baud"; 2056 status = "disabled"; 2057 }; 2058 2059 uart_AO_B: serial@4000 { 2060 compatible = "amlogic,meson-g12a-uart", 2061 "amlogic,meson-gx-uart", 2062 "amlogic,meson-ao-uart"; 2063 reg = <0x0 0x4000 0x0 0x18>; 2064 interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; 2065 clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; 2066 clock-names = "xtal", "pclk", "baud"; 2067 status = "disabled"; 2068 }; 2069 2070 i2c_AO: i2c@5000 { 2071 compatible = "amlogic,meson-axg-i2c"; 2072 status = "disabled"; 2073 reg = <0x0 0x05000 0x0 0x20>; 2074 interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; 2075 #address-cells = <1>; 2076 #size-cells = <0>; 2077 clocks = <&clkc CLKID_I2C>; 2078 }; 2079 2080 pwm_AO_ab: pwm@7000 { 2081 compatible = "amlogic,meson-g12a-ao-pwm-ab"; 2082 reg = <0x0 0x7000 0x0 0x20>; 2083 #pwm-cells = <3>; 2084 status = "disabled"; 2085 }; 2086 2087 ir: ir@8000 { 2088 compatible = "amlogic,meson-gxbb-ir"; 2089 reg = <0x0 0x8000 0x0 0x20>; 2090 interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; 2091 status = "disabled"; 2092 }; 2093 2094 saradc: adc@9000 { 2095 compatible = "amlogic,meson-g12a-saradc", 2096 "amlogic,meson-saradc"; 2097 reg = <0x0 0x9000 0x0 0x48>; 2098 #io-channel-cells = <1>; 2099 interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>; 2100 clocks = <&xtal>, 2101 <&clkc_AO CLKID_AO_SAR_ADC>, 2102 <&clkc_AO CLKID_AO_SAR_ADC_CLK>, 2103 <&clkc_AO CLKID_AO_SAR_ADC_SEL>; 2104 clock-names = "clkin", "core", "adc_clk", "adc_sel"; 2105 status = "disabled"; 2106 }; 2107 }; 2108 2109 vdec: video-decoder@ff620000 { 2110 compatible = "amlogic,g12a-vdec"; 2111 reg = <0x0 0xff620000 0x0 0x10000>, 2112 <0x0 0xffd0e180 0x0 0xe4>; 2113 reg-names = "dos", "esparser"; 2114 interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, 2115 <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; 2116 interrupt-names = "vdec", "esparser"; 2117 2118 amlogic,ao-sysctrl = <&rti>; 2119 amlogic,canvas = <&canvas>; 2120 2121 clocks = <&clkc CLKID_PARSER>, 2122 <&clkc CLKID_DOS>, 2123 <&clkc CLKID_VDEC_1>, 2124 <&clkc CLKID_VDEC_HEVC>, 2125 <&clkc CLKID_VDEC_HEVCF>; 2126 clock-names = "dos_parser", "dos", "vdec_1", 2127 "vdec_hevc", "vdec_hevcf"; 2128 resets = <&reset RESET_PARSER>; 2129 reset-names = "esparser"; 2130 }; 2131 2132 vpu: vpu@ff900000 { 2133 compatible = "amlogic,meson-g12a-vpu"; 2134 reg = <0x0 0xff900000 0x0 0x100000>, 2135 <0x0 0xff63c000 0x0 0x1000>; 2136 reg-names = "vpu", "hhi"; 2137 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; 2138 #address-cells = <1>; 2139 #size-cells = <0>; 2140 amlogic,canvas = <&canvas>; 2141 2142 /* CVBS VDAC output port */ 2143 cvbs_vdac_port: port@0 { 2144 reg = <0>; 2145 }; 2146 2147 /* HDMI-TX output port */ 2148 hdmi_tx_port: port@1 { 2149 reg = <1>; 2150 2151 hdmi_tx_out: endpoint { 2152 remote-endpoint = <&hdmi_tx_in>; 2153 }; 2154 }; 2155 }; 2156 2157 gic: interrupt-controller@ffc01000 { 2158 compatible = "arm,gic-400"; 2159 reg = <0x0 0xffc01000 0 0x1000>, 2160 <0x0 0xffc02000 0 0x2000>, 2161 <0x0 0xffc04000 0 0x2000>, 2162 <0x0 0xffc06000 0 0x2000>; 2163 interrupt-controller; 2164 interrupts = <GIC_PPI 9 2165 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; 2166 #interrupt-cells = <3>; 2167 #address-cells = <0>; 2168 }; 2169 2170 cbus: bus@ffd00000 { 2171 compatible = "simple-bus"; 2172 reg = <0x0 0xffd00000 0x0 0x100000>; 2173 #address-cells = <2>; 2174 #size-cells = <2>; 2175 ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; 2176 2177 reset: reset-controller@1004 { 2178 compatible = "amlogic,meson-axg-reset"; 2179 reg = <0x0 0x1004 0x0 0x9c>; 2180 #reset-cells = <1>; 2181 }; 2182 2183 gpio_intc: interrupt-controller@f080 { 2184 compatible = "amlogic,meson-g12a-gpio-intc", 2185 "amlogic,meson-gpio-intc"; 2186 reg = <0x0 0xf080 0x0 0x10>; 2187 interrupt-controller; 2188 #interrupt-cells = <2>; 2189 amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; 2190 }; 2191 2192 watchdog: watchdog@f0d0 { 2193 compatible = "amlogic,meson-gxbb-wdt"; 2194 reg = <0x0 0xf0d0 0x0 0x10>; 2195 clocks = <&xtal>; 2196 }; 2197 2198 spicc0: spi@13000 { 2199 compatible = "amlogic,meson-g12a-spicc"; 2200 reg = <0x0 0x13000 0x0 0x44>; 2201 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 2202 clocks = <&clkc CLKID_SPICC0>, 2203 <&clkc CLKID_SPICC0_SCLK>; 2204 clock-names = "core", "pclk"; 2205 #address-cells = <1>; 2206 #size-cells = <0>; 2207 status = "disabled"; 2208 }; 2209 2210 spicc1: spi@15000 { 2211 compatible = "amlogic,meson-g12a-spicc"; 2212 reg = <0x0 0x15000 0x0 0x44>; 2213 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 2214 clocks = <&clkc CLKID_SPICC1>, 2215 <&clkc CLKID_SPICC1_SCLK>; 2216 clock-names = "core", "pclk"; 2217 #address-cells = <1>; 2218 #size-cells = <0>; 2219 status = "disabled"; 2220 }; 2221 2222 spifc: spi@14000 { 2223 compatible = "amlogic,meson-gxbb-spifc"; 2224 status = "disabled"; 2225 reg = <0x0 0x14000 0x0 0x80>; 2226 #address-cells = <1>; 2227 #size-cells = <0>; 2228 clocks = <&clkc CLKID_CLK81>; 2229 }; 2230 2231 pwm_ef: pwm@19000 { 2232 compatible = "amlogic,meson-g12a-ee-pwm"; 2233 reg = <0x0 0x19000 0x0 0x20>; 2234 #pwm-cells = <3>; 2235 status = "disabled"; 2236 }; 2237 2238 pwm_cd: pwm@1a000 { 2239 compatible = "amlogic,meson-g12a-ee-pwm"; 2240 reg = <0x0 0x1a000 0x0 0x20>; 2241 #pwm-cells = <3>; 2242 status = "disabled"; 2243 }; 2244 2245 pwm_ab: pwm@1b000 { 2246 compatible = "amlogic,meson-g12a-ee-pwm"; 2247 reg = <0x0 0x1b000 0x0 0x20>; 2248 #pwm-cells = <3>; 2249 status = "disabled"; 2250 }; 2251 2252 i2c3: i2c@1c000 { 2253 compatible = "amlogic,meson-axg-i2c"; 2254 status = "disabled"; 2255 reg = <0x0 0x1c000 0x0 0x20>; 2256 interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; 2257 #address-cells = <1>; 2258 #size-cells = <0>; 2259 clocks = <&clkc CLKID_I2C>; 2260 }; 2261 2262 i2c2: i2c@1d000 { 2263 compatible = "amlogic,meson-axg-i2c"; 2264 status = "disabled"; 2265 reg = <0x0 0x1d000 0x0 0x20>; 2266 interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; 2267 #address-cells = <1>; 2268 #size-cells = <0>; 2269 clocks = <&clkc CLKID_I2C>; 2270 }; 2271 2272 i2c1: i2c@1e000 { 2273 compatible = "amlogic,meson-axg-i2c"; 2274 status = "disabled"; 2275 reg = <0x0 0x1e000 0x0 0x20>; 2276 interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; 2277 #address-cells = <1>; 2278 #size-cells = <0>; 2279 clocks = <&clkc CLKID_I2C>; 2280 }; 2281 2282 i2c0: i2c@1f000 { 2283 compatible = "amlogic,meson-axg-i2c"; 2284 status = "disabled"; 2285 reg = <0x0 0x1f000 0x0 0x20>; 2286 interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; 2287 #address-cells = <1>; 2288 #size-cells = <0>; 2289 clocks = <&clkc CLKID_I2C>; 2290 }; 2291 2292 clk_msr: clock-measure@18000 { 2293 compatible = "amlogic,meson-g12a-clk-measure"; 2294 reg = <0x0 0x18000 0x0 0x10>; 2295 }; 2296 2297 uart_C: serial@22000 { 2298 compatible = "amlogic,meson-g12a-uart", 2299 "amlogic,meson-gx-uart"; 2300 reg = <0x0 0x22000 0x0 0x18>; 2301 interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; 2302 clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; 2303 clock-names = "xtal", "pclk", "baud"; 2304 status = "disabled"; 2305 }; 2306 2307 uart_B: serial@23000 { 2308 compatible = "amlogic,meson-g12a-uart", 2309 "amlogic,meson-gx-uart"; 2310 reg = <0x0 0x23000 0x0 0x18>; 2311 interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; 2312 clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; 2313 clock-names = "xtal", "pclk", "baud"; 2314 status = "disabled"; 2315 }; 2316 2317 uart_A: serial@24000 { 2318 compatible = "amlogic,meson-g12a-uart", 2319 "amlogic,meson-gx-uart"; 2320 reg = <0x0 0x24000 0x0 0x18>; 2321 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; 2322 clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; 2323 clock-names = "xtal", "pclk", "baud"; 2324 status = "disabled"; 2325 fifo-size = <128>; 2326 }; 2327 }; 2328 2329 sd_emmc_a: mmc@ffe03000 { 2330 compatible = "amlogic,meson-axg-mmc"; 2331 reg = <0x0 0xffe03000 0x0 0x800>; 2332 interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; 2333 status = "disabled"; 2334 clocks = <&clkc CLKID_SD_EMMC_A>, 2335 <&clkc CLKID_SD_EMMC_A_CLK0>, 2336 <&clkc CLKID_FCLK_DIV2>; 2337 clock-names = "core", "clkin0", "clkin1"; 2338 resets = <&reset RESET_SD_EMMC_A>; 2339 }; 2340 2341 sd_emmc_b: mmc@ffe05000 { 2342 compatible = "amlogic,meson-axg-mmc"; 2343 reg = <0x0 0xffe05000 0x0 0x800>; 2344 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 2345 status = "disabled"; 2346 clocks = <&clkc CLKID_SD_EMMC_B>, 2347 <&clkc CLKID_SD_EMMC_B_CLK0>, 2348 <&clkc CLKID_FCLK_DIV2>; 2349 clock-names = "core", "clkin0", "clkin1"; 2350 resets = <&reset RESET_SD_EMMC_B>; 2351 }; 2352 2353 sd_emmc_c: mmc@ffe07000 { 2354 compatible = "amlogic,meson-axg-mmc"; 2355 reg = <0x0 0xffe07000 0x0 0x800>; 2356 interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; 2357 status = "disabled"; 2358 clocks = <&clkc CLKID_SD_EMMC_C>, 2359 <&clkc CLKID_SD_EMMC_C_CLK0>, 2360 <&clkc CLKID_FCLK_DIV2>; 2361 clock-names = "core", "clkin0", "clkin1"; 2362 resets = <&reset RESET_SD_EMMC_C>; 2363 }; 2364 2365 usb: usb@ffe09000 { 2366 status = "disabled"; 2367 compatible = "amlogic,meson-g12a-usb-ctrl"; 2368 reg = <0x0 0xffe09000 0x0 0xa0>; 2369 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; 2370 #address-cells = <2>; 2371 #size-cells = <2>; 2372 ranges; 2373 2374 clocks = <&clkc CLKID_USB>; 2375 resets = <&reset RESET_USB>; 2376 2377 dr_mode = "otg"; 2378 2379 phys = <&usb2_phy0>, <&usb2_phy1>, 2380 <&usb3_pcie_phy PHY_TYPE_USB3>; 2381 phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; 2382 2383 dwc2: usb@ff400000 { 2384 compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; 2385 reg = <0x0 0xff400000 0x0 0x40000>; 2386 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; 2387 clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; 2388 clock-names = "otg"; 2389 phys = <&usb2_phy1>; 2390 phy-names = "usb2-phy"; 2391 dr_mode = "peripheral"; 2392 g-rx-fifo-size = <192>; 2393 g-np-tx-fifo-size = <128>; 2394 g-tx-fifo-size = <128 128 16 16 16>; 2395 }; 2396 2397 dwc3: usb@ff500000 { 2398 compatible = "snps,dwc3"; 2399 reg = <0x0 0xff500000 0x0 0x100000>; 2400 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; 2401 dr_mode = "host"; 2402 snps,dis_u2_susphy_quirk; 2403 snps,quirk-frame-length-adjustment = <0x20>; 2404 snps,parkmode-disable-ss-quirk; 2405 }; 2406 }; 2407 2408 mali: gpu@ffe40000 { 2409 compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; 2410 reg = <0x0 0xffe40000 0x0 0x40000>; 2411 interrupt-parent = <&gic>; 2412 interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, 2413 <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, 2414 <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; 2415 interrupt-names = "job", "mmu", "gpu"; 2416 clocks = <&clkc CLKID_MALI>; 2417 resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; 2418 operating-points-v2 = <&gpu_opp_table>; 2419 #cooling-cells = <2>; 2420 }; 2421 }; 2422 2423 thermal-zones { 2424 cpu_thermal: cpu-thermal { 2425 polling-delay = <1000>; 2426 polling-delay-passive = <100>; 2427 thermal-sensors = <&cpu_temp>; 2428 2429 trips { 2430 cpu_passive: cpu-passive { 2431 temperature = <85000>; /* millicelsius */ 2432 hysteresis = <2000>; /* millicelsius */ 2433 type = "passive"; 2434 }; 2435 2436 cpu_hot: cpu-hot { 2437 temperature = <95000>; /* millicelsius */ 2438 hysteresis = <2000>; /* millicelsius */ 2439 type = "hot"; 2440 }; 2441 2442 cpu_critical: cpu-critical { 2443 temperature = <110000>; /* millicelsius */ 2444 hysteresis = <2000>; /* millicelsius */ 2445 type = "critical"; 2446 }; 2447 }; 2448 }; 2449 2450 ddr_thermal: ddr-thermal { 2451 polling-delay = <1000>; 2452 polling-delay-passive = <100>; 2453 thermal-sensors = <&ddr_temp>; 2454 2455 trips { 2456 ddr_passive: ddr-passive { 2457 temperature = <85000>; /* millicelsius */ 2458 hysteresis = <2000>; /* millicelsius */ 2459 type = "passive"; 2460 }; 2461 2462 ddr_critical: ddr-critical { 2463 temperature = <110000>; /* millicelsius */ 2464 hysteresis = <2000>; /* millicelsius */ 2465 type = "critical"; 2466 }; 2467 }; 2468 2469 cooling-maps { 2470 map { 2471 trip = <&ddr_passive>; 2472 cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2473 }; 2474 }; 2475 }; 2476 }; 2477 2478 timer { 2479 compatible = "arm,armv8-timer"; 2480 interrupts = <GIC_PPI 13 2481 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, 2482 <GIC_PPI 14 2483 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, 2484 <GIC_PPI 11 2485 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, 2486 <GIC_PPI 10 2487 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; 2488 arm,no-tick-in-suspend; 2489 }; 2490 2491 xtal: xtal-clk { 2492 compatible = "fixed-clock"; 2493 clock-frequency = <24000000>; 2494 clock-output-names = "xtal"; 2495 #clock-cells = <0>; 2496 }; 2497 2498 npu: npu@ff100000 { 2499 compatible = "vivante,gc"; 2500 reg = <0x0 0xff100000 0x0 0x20000>; 2501 interrupts = <0 147 4>; 2502 clocks = <&clkc CLKID_NNA_CORE_CLK>, 2503 <&clkc CLKID_NNA_AXI_CLK>; 2504 clock-names = "core", "bus"; 2505 resets = <&reset RESET_NNA>; 2506 status = "disabled"; 2507 }; 2508}; 2509