xref: /freebsd/sys/contrib/device-tree/src/arm64/allwinner/sun50i-h616.dtsi (revision 7ef62cebc2f965b0f640263e179276928885e33d)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2// Copyright (C) 2020 Arm Ltd.
3// based on the H6 dtsi, which is:
4//   Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
5
6#include <dt-bindings/interrupt-controller/arm-gic.h>
7#include <dt-bindings/clock/sun50i-h616-ccu.h>
8#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
9#include <dt-bindings/clock/sun6i-rtc.h>
10#include <dt-bindings/reset/sun50i-h616-ccu.h>
11#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
12
13/ {
14	interrupt-parent = <&gic>;
15	#address-cells = <2>;
16	#size-cells = <2>;
17
18	cpus {
19		#address-cells = <1>;
20		#size-cells = <0>;
21
22		cpu0: cpu@0 {
23			compatible = "arm,cortex-a53";
24			device_type = "cpu";
25			reg = <0>;
26			enable-method = "psci";
27			clocks = <&ccu CLK_CPUX>;
28		};
29
30		cpu1: cpu@1 {
31			compatible = "arm,cortex-a53";
32			device_type = "cpu";
33			reg = <1>;
34			enable-method = "psci";
35			clocks = <&ccu CLK_CPUX>;
36		};
37
38		cpu2: cpu@2 {
39			compatible = "arm,cortex-a53";
40			device_type = "cpu";
41			reg = <2>;
42			enable-method = "psci";
43			clocks = <&ccu CLK_CPUX>;
44		};
45
46		cpu3: cpu@3 {
47			compatible = "arm,cortex-a53";
48			device_type = "cpu";
49			reg = <3>;
50			enable-method = "psci";
51			clocks = <&ccu CLK_CPUX>;
52		};
53	};
54
55	reserved-memory {
56		#address-cells = <2>;
57		#size-cells = <2>;
58		ranges;
59
60		/*
61		 * 256 KiB reserved for Trusted Firmware-A (BL31).
62		 * This is added by BL31 itself, but some bootloaders fail
63		 * to propagate this into the DTB handed to kernels.
64		 */
65		secmon@40000000 {
66			reg = <0x0 0x40000000 0x0 0x40000>;
67			no-map;
68		};
69	};
70
71	osc24M: osc24M-clk {
72		#clock-cells = <0>;
73		compatible = "fixed-clock";
74		clock-frequency = <24000000>;
75		clock-output-names = "osc24M";
76	};
77
78	pmu {
79		compatible = "arm,cortex-a53-pmu";
80		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
81			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
82			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
83			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
84		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
85	};
86
87	psci {
88		compatible = "arm,psci-0.2";
89		method = "smc";
90	};
91
92	timer {
93		compatible = "arm,armv8-timer";
94		arm,no-tick-in-suspend;
95		interrupts = <GIC_PPI 13
96			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
97			     <GIC_PPI 14
98			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
99			     <GIC_PPI 11
100			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
101			     <GIC_PPI 10
102			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
103	};
104
105	soc {
106		compatible = "simple-bus";
107		#address-cells = <1>;
108		#size-cells = <1>;
109		ranges = <0x0 0x0 0x0 0x40000000>;
110
111		syscon: syscon@3000000 {
112			compatible = "allwinner,sun50i-h616-system-control";
113			reg = <0x03000000 0x1000>;
114			#address-cells = <1>;
115			#size-cells = <1>;
116			ranges;
117
118			sram_c: sram@28000 {
119				compatible = "mmio-sram";
120				reg = <0x00028000 0x30000>;
121				#address-cells = <1>;
122				#size-cells = <1>;
123				ranges = <0 0x00028000 0x30000>;
124			};
125		};
126
127		ccu: clock@3001000 {
128			compatible = "allwinner,sun50i-h616-ccu";
129			reg = <0x03001000 0x1000>;
130			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
131			clock-names = "hosc", "losc", "iosc";
132			#clock-cells = <1>;
133			#reset-cells = <1>;
134		};
135
136		watchdog: watchdog@30090a0 {
137			compatible = "allwinner,sun50i-h616-wdt",
138				     "allwinner,sun6i-a31-wdt";
139			reg = <0x030090a0 0x20>;
140			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
141			clocks = <&osc24M>;
142		};
143
144		pio: pinctrl@300b000 {
145			compatible = "allwinner,sun50i-h616-pinctrl";
146			reg = <0x0300b000 0x400>;
147			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
148				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
149				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
150				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
151				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
152				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
153				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
154				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
155			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
156			clock-names = "apb", "hosc", "losc";
157			gpio-controller;
158			#gpio-cells = <3>;
159			interrupt-controller;
160			#interrupt-cells = <3>;
161
162			ext_rgmii_pins: rgmii-pins {
163				pins = "PI0", "PI1", "PI2", "PI3", "PI4",
164				       "PI5", "PI7", "PI8", "PI9", "PI10",
165				       "PI11", "PI12", "PI13", "PI14", "PI15",
166				       "PI16";
167				function = "emac0";
168				drive-strength = <40>;
169			};
170
171			i2c0_pins: i2c0-pins {
172				pins = "PI6", "PI7";
173				function = "i2c0";
174			};
175
176			i2c3_ph_pins: i2c3-ph-pins {
177				pins = "PH4", "PH5";
178				function = "i2c3";
179			};
180
181			ir_rx_pin: ir-rx-pin {
182				pins = "PH10";
183				function = "ir_rx";
184			};
185
186			mmc0_pins: mmc0-pins {
187				pins = "PF0", "PF1", "PF2", "PF3",
188				       "PF4", "PF5";
189				function = "mmc0";
190				drive-strength = <30>;
191				bias-pull-up;
192			};
193
194			/omit-if-no-ref/
195			mmc1_pins: mmc1-pins {
196				pins = "PG0", "PG1", "PG2", "PG3",
197				       "PG4", "PG5";
198				function = "mmc1";
199				drive-strength = <30>;
200				bias-pull-up;
201			};
202
203			mmc2_pins: mmc2-pins {
204				pins = "PC0", "PC1", "PC5", "PC6",
205				       "PC8", "PC9", "PC10", "PC11",
206				       "PC13", "PC14", "PC15", "PC16";
207				function = "mmc2";
208				drive-strength = <30>;
209				bias-pull-up;
210			};
211
212			/omit-if-no-ref/
213			spi0_pins: spi0-pins {
214				pins = "PC0", "PC2", "PC4";
215				function = "spi0";
216			};
217
218			/omit-if-no-ref/
219			spi0_cs0_pin: spi0-cs0-pin {
220				pins = "PC3";
221				function = "spi0";
222			};
223
224			/omit-if-no-ref/
225			spi1_pins: spi1-pins {
226				pins = "PH6", "PH7", "PH8";
227				function = "spi1";
228			};
229
230			/omit-if-no-ref/
231			spi1_cs0_pin: spi1-cs0-pin {
232				pins = "PH5";
233				function = "spi1";
234			};
235
236			uart0_ph_pins: uart0-ph-pins {
237				pins = "PH0", "PH1";
238				function = "uart0";
239			};
240
241			/omit-if-no-ref/
242			uart1_pins: uart1-pins {
243				pins = "PG6", "PG7";
244				function = "uart1";
245			};
246
247			/omit-if-no-ref/
248			uart1_rts_cts_pins: uart1-rts-cts-pins {
249				pins = "PG8", "PG9";
250				function = "uart1";
251			};
252		};
253
254		gic: interrupt-controller@3021000 {
255			compatible = "arm,gic-400";
256			reg = <0x03021000 0x1000>,
257			      <0x03022000 0x2000>,
258			      <0x03024000 0x2000>,
259			      <0x03026000 0x2000>;
260			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
261			interrupt-controller;
262			#interrupt-cells = <3>;
263		};
264
265		mmc0: mmc@4020000 {
266			compatible = "allwinner,sun50i-h616-mmc",
267				     "allwinner,sun50i-a100-mmc";
268			reg = <0x04020000 0x1000>;
269			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
270			clock-names = "ahb", "mmc";
271			resets = <&ccu RST_BUS_MMC0>;
272			reset-names = "ahb";
273			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
274			pinctrl-names = "default";
275			pinctrl-0 = <&mmc0_pins>;
276			status = "disabled";
277			max-frequency = <150000000>;
278			cap-sd-highspeed;
279			cap-mmc-highspeed;
280			mmc-ddr-3_3v;
281			cap-sdio-irq;
282			#address-cells = <1>;
283			#size-cells = <0>;
284		};
285
286		mmc1: mmc@4021000 {
287			compatible = "allwinner,sun50i-h616-mmc",
288				     "allwinner,sun50i-a100-mmc";
289			reg = <0x04021000 0x1000>;
290			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
291			clock-names = "ahb", "mmc";
292			resets = <&ccu RST_BUS_MMC1>;
293			reset-names = "ahb";
294			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
295			pinctrl-names = "default";
296			pinctrl-0 = <&mmc1_pins>;
297			status = "disabled";
298			max-frequency = <150000000>;
299			cap-sd-highspeed;
300			cap-mmc-highspeed;
301			mmc-ddr-3_3v;
302			cap-sdio-irq;
303			#address-cells = <1>;
304			#size-cells = <0>;
305		};
306
307		mmc2: mmc@4022000 {
308			compatible = "allwinner,sun50i-h616-emmc",
309				     "allwinner,sun50i-a100-emmc";
310			reg = <0x04022000 0x1000>;
311			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
312			clock-names = "ahb", "mmc";
313			resets = <&ccu RST_BUS_MMC2>;
314			reset-names = "ahb";
315			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
316			pinctrl-names = "default";
317			pinctrl-0 = <&mmc2_pins>;
318			status = "disabled";
319			max-frequency = <150000000>;
320			cap-sd-highspeed;
321			cap-mmc-highspeed;
322			mmc-ddr-3_3v;
323			cap-sdio-irq;
324			#address-cells = <1>;
325			#size-cells = <0>;
326		};
327
328		uart0: serial@5000000 {
329			compatible = "snps,dw-apb-uart";
330			reg = <0x05000000 0x400>;
331			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
332			reg-shift = <2>;
333			reg-io-width = <4>;
334			clocks = <&ccu CLK_BUS_UART0>;
335			resets = <&ccu RST_BUS_UART0>;
336			status = "disabled";
337		};
338
339		uart1: serial@5000400 {
340			compatible = "snps,dw-apb-uart";
341			reg = <0x05000400 0x400>;
342			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
343			reg-shift = <2>;
344			reg-io-width = <4>;
345			clocks = <&ccu CLK_BUS_UART1>;
346			resets = <&ccu RST_BUS_UART1>;
347			status = "disabled";
348		};
349
350		uart2: serial@5000800 {
351			compatible = "snps,dw-apb-uart";
352			reg = <0x05000800 0x400>;
353			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
354			reg-shift = <2>;
355			reg-io-width = <4>;
356			clocks = <&ccu CLK_BUS_UART2>;
357			resets = <&ccu RST_BUS_UART2>;
358			status = "disabled";
359		};
360
361		uart3: serial@5000c00 {
362			compatible = "snps,dw-apb-uart";
363			reg = <0x05000c00 0x400>;
364			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
365			reg-shift = <2>;
366			reg-io-width = <4>;
367			clocks = <&ccu CLK_BUS_UART3>;
368			resets = <&ccu RST_BUS_UART3>;
369			status = "disabled";
370		};
371
372		uart4: serial@5001000 {
373			compatible = "snps,dw-apb-uart";
374			reg = <0x05001000 0x400>;
375			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
376			reg-shift = <2>;
377			reg-io-width = <4>;
378			clocks = <&ccu CLK_BUS_UART4>;
379			resets = <&ccu RST_BUS_UART4>;
380			status = "disabled";
381		};
382
383		uart5: serial@5001400 {
384			compatible = "snps,dw-apb-uart";
385			reg = <0x05001400 0x400>;
386			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
387			reg-shift = <2>;
388			reg-io-width = <4>;
389			clocks = <&ccu CLK_BUS_UART5>;
390			resets = <&ccu RST_BUS_UART5>;
391			status = "disabled";
392		};
393
394		i2c0: i2c@5002000 {
395			compatible = "allwinner,sun50i-h616-i2c",
396				     "allwinner,sun8i-v536-i2c",
397				     "allwinner,sun6i-a31-i2c";
398			reg = <0x05002000 0x400>;
399			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
400			clocks = <&ccu CLK_BUS_I2C0>;
401			resets = <&ccu RST_BUS_I2C0>;
402			pinctrl-names = "default";
403			pinctrl-0 = <&i2c0_pins>;
404			status = "disabled";
405			#address-cells = <1>;
406			#size-cells = <0>;
407		};
408
409		i2c1: i2c@5002400 {
410			compatible = "allwinner,sun50i-h616-i2c",
411				     "allwinner,sun8i-v536-i2c",
412				     "allwinner,sun6i-a31-i2c";
413			reg = <0x05002400 0x400>;
414			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
415			clocks = <&ccu CLK_BUS_I2C1>;
416			resets = <&ccu RST_BUS_I2C1>;
417			status = "disabled";
418			#address-cells = <1>;
419			#size-cells = <0>;
420		};
421
422		i2c2: i2c@5002800 {
423			compatible = "allwinner,sun50i-h616-i2c",
424				     "allwinner,sun8i-v536-i2c",
425				     "allwinner,sun6i-a31-i2c";
426			reg = <0x05002800 0x400>;
427			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
428			clocks = <&ccu CLK_BUS_I2C2>;
429			resets = <&ccu RST_BUS_I2C2>;
430			status = "disabled";
431			#address-cells = <1>;
432			#size-cells = <0>;
433		};
434
435		i2c3: i2c@5002c00 {
436			compatible = "allwinner,sun50i-h616-i2c",
437				     "allwinner,sun8i-v536-i2c",
438				     "allwinner,sun6i-a31-i2c";
439			reg = <0x05002c00 0x400>;
440			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
441			clocks = <&ccu CLK_BUS_I2C3>;
442			resets = <&ccu RST_BUS_I2C3>;
443			status = "disabled";
444			#address-cells = <1>;
445			#size-cells = <0>;
446		};
447
448		i2c4: i2c@5003000 {
449			compatible = "allwinner,sun50i-h616-i2c",
450				     "allwinner,sun8i-v536-i2c",
451				     "allwinner,sun6i-a31-i2c";
452			reg = <0x05003000 0x400>;
453			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
454			clocks = <&ccu CLK_BUS_I2C4>;
455			resets = <&ccu RST_BUS_I2C4>;
456			status = "disabled";
457			#address-cells = <1>;
458			#size-cells = <0>;
459		};
460
461		spi0: spi@5010000 {
462			compatible = "allwinner,sun50i-h616-spi",
463				     "allwinner,sun8i-h3-spi";
464			reg = <0x05010000 0x1000>;
465			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
466			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
467			clock-names = "ahb", "mod";
468			resets = <&ccu RST_BUS_SPI0>;
469			status = "disabled";
470			#address-cells = <1>;
471			#size-cells = <0>;
472		};
473
474		spi1: spi@5011000 {
475			compatible = "allwinner,sun50i-h616-spi",
476				     "allwinner,sun8i-h3-spi";
477			reg = <0x05011000 0x1000>;
478			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
479			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
480			clock-names = "ahb", "mod";
481			resets = <&ccu RST_BUS_SPI1>;
482			status = "disabled";
483			#address-cells = <1>;
484			#size-cells = <0>;
485		};
486
487		emac0: ethernet@5020000 {
488			compatible = "allwinner,sun50i-h616-emac0",
489				     "allwinner,sun50i-a64-emac";
490			reg = <0x05020000 0x10000>;
491			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
492			interrupt-names = "macirq";
493			clocks = <&ccu CLK_BUS_EMAC0>;
494			clock-names = "stmmaceth";
495			resets = <&ccu RST_BUS_EMAC0>;
496			reset-names = "stmmaceth";
497			syscon = <&syscon>;
498			status = "disabled";
499
500			mdio0: mdio {
501				compatible = "snps,dwmac-mdio";
502				#address-cells = <1>;
503				#size-cells = <0>;
504			};
505		};
506
507		rtc: rtc@7000000 {
508			compatible = "allwinner,sun50i-h616-rtc";
509			reg = <0x07000000 0x400>;
510			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
511			clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>,
512				 <&ccu CLK_PLL_SYSTEM_32K>;
513			clock-names = "bus", "hosc",
514				      "pll-32k";
515			#clock-cells = <1>;
516		};
517
518		r_ccu: clock@7010000 {
519			compatible = "allwinner,sun50i-h616-r-ccu";
520			reg = <0x07010000 0x210>;
521			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
522				 <&ccu CLK_PLL_PERIPH0>;
523			clock-names = "hosc", "losc", "iosc", "pll-periph";
524			#clock-cells = <1>;
525			#reset-cells = <1>;
526		};
527
528		r_pio: pinctrl@7022000 {
529			compatible = "allwinner,sun50i-h616-r-pinctrl";
530			reg = <0x07022000 0x400>;
531			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
532				 <&rtc CLK_OSC32K>;
533			clock-names = "apb", "hosc", "losc";
534			gpio-controller;
535			#gpio-cells = <3>;
536
537			/omit-if-no-ref/
538			r_i2c_pins: r-i2c-pins {
539				pins = "PL0", "PL1";
540				function = "s_i2c";
541			};
542
543			r_rsb_pins: r-rsb-pins {
544				pins = "PL0", "PL1";
545				function = "s_rsb";
546			};
547		};
548
549		ir: ir@7040000 {
550			compatible = "allwinner,sun50i-h616-ir",
551				     "allwinner,sun6i-a31-ir";
552			reg = <0x07040000 0x400>;
553			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
554			clocks = <&r_ccu CLK_R_APB1_IR>,
555				 <&r_ccu CLK_IR>;
556			clock-names = "apb", "ir";
557			resets = <&r_ccu RST_R_APB1_IR>;
558			pinctrl-names = "default";
559			pinctrl-0 = <&ir_rx_pin>;
560			status = "disabled";
561		};
562
563		r_i2c: i2c@7081400 {
564			compatible = "allwinner,sun50i-h616-i2c",
565				     "allwinner,sun8i-v536-i2c",
566				     "allwinner,sun6i-a31-i2c";
567			reg = <0x07081400 0x400>;
568			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
569			clocks = <&r_ccu CLK_R_APB2_I2C>;
570			resets = <&r_ccu RST_R_APB2_I2C>;
571			status = "disabled";
572			#address-cells = <1>;
573			#size-cells = <0>;
574		};
575
576		r_rsb: rsb@7083000 {
577			compatible = "allwinner,sun50i-h616-rsb",
578				     "allwinner,sun8i-a23-rsb";
579			reg = <0x07083000 0x400>;
580			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
581			clocks = <&r_ccu CLK_R_APB2_RSB>;
582			clock-frequency = <3000000>;
583			resets = <&r_ccu RST_R_APB2_RSB>;
584			pinctrl-names = "default";
585			pinctrl-0 = <&r_rsb_pins>;
586			status = "disabled";
587			#address-cells = <1>;
588			#size-cells = <0>;
589		};
590	};
591};
592