xref: /freebsd/sys/contrib/device-tree/src/arm64/allwinner/sun50i-h6-tanix-tx6.dts (revision c66ec88fed842fbaad62c30d510644ceb7bd2d71) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
3
4/dts-v1/;
5
6#include "sun50i-h6.dtsi"
7#include "sun50i-h6-cpu-opp.dtsi"
8
9#include <dt-bindings/gpio/gpio.h>
10
11/ {
12	model = "Tanix TX6";
13	compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
14
15	aliases {
16		serial0 = &uart0;
17	};
18
19	chosen {
20		stdout-path = "serial0:115200n8";
21	};
22
23	connector {
24		compatible = "hdmi-connector";
25		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
26		type = "a";
27
28		port {
29			hdmi_con_in: endpoint {
30				remote-endpoint = <&hdmi_out_con>;
31			};
32		};
33	};
34
35	reg_vcc3v3: vcc3v3 {
36		compatible = "regulator-fixed";
37		regulator-name = "vcc3v3";
38		regulator-min-microvolt = <3300000>;
39		regulator-max-microvolt = <3300000>;
40	};
41
42	reg_vdd_cpu_gpu: vdd-cpu-gpu {
43		compatible = "regulator-fixed";
44		regulator-name = "vdd-cpu-gpu";
45		regulator-min-microvolt = <1135000>;
46		regulator-max-microvolt = <1135000>;
47	};
48};
49
50&cpu0 {
51	cpu-supply = <&reg_vdd_cpu_gpu>;
52};
53
54&de {
55	status = "okay";
56};
57
58&dwc3 {
59	status = "okay";
60};
61
62&ehci0 {
63	status = "okay";
64};
65
66&ehci3 {
67	status = "okay";
68};
69
70&gpu {
71	mali-supply = <&reg_vdd_cpu_gpu>;
72	status = "okay";
73};
74
75&hdmi {
76	status = "okay";
77};
78
79&hdmi_out {
80	hdmi_out_con: endpoint {
81		remote-endpoint = <&hdmi_con_in>;
82	};
83};
84
85&mmc0 {
86	pinctrl-names = "default";
87	pinctrl-0 = <&mmc0_pins>;
88	vmmc-supply = <&reg_vcc3v3>;
89	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
90	bus-width = <4>;
91	status = "okay";
92};
93
94&ohci0 {
95	status = "okay";
96};
97
98&ohci3 {
99	status = "okay";
100};
101
102&r_ir {
103	linux,rc-map-name = "rc-tanix-tx5max";
104	status = "okay";
105};
106
107&uart0 {
108	pinctrl-names = "default";
109	pinctrl-0 = <&uart0_ph_pins>;
110	status = "okay";
111};
112
113&usb2otg {
114	dr_mode = "host";
115	status = "okay";
116};
117
118&usb2phy {
119	status = "okay";
120};
121
122&usb3phy {
123	status = "okay";
124};
125