1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2// Copyright (C) 2018 Amarula Solutions 3// Author: Jagan Teki <jagan@amarulasolutions.com> 4 5/dts-v1/; 6 7#include "sun50i-h6.dtsi" 8 9#include <dt-bindings/gpio/gpio.h> 10 11/ { 12 model = "OrangePi One Plus"; 13 compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6"; 14 15 aliases { 16 serial0 = &uart0; 17 }; 18 19 chosen { 20 stdout-path = "serial0:115200n8"; 21 }; 22 23 connector { 24 compatible = "hdmi-connector"; 25 type = "a"; 26 ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ 27 28 port { 29 hdmi_con_in: endpoint { 30 remote-endpoint = <&hdmi_out_con>; 31 }; 32 }; 33 }; 34 35 ext_osc32k: ext_osc32k_clk { 36 #clock-cells = <0>; 37 compatible = "fixed-clock"; 38 clock-frequency = <32768>; 39 clock-output-names = "ext_osc32k"; 40 }; 41 42 leds { 43 compatible = "gpio-leds"; 44 45 led-0 { 46 label = "orangepi:red:power"; 47 gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ 48 default-state = "on"; 49 }; 50 51 led-1 { 52 label = "orangepi:green:status"; 53 gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ 54 }; 55 }; 56 57 reg_vcc5v: vcc5v { 58 /* board wide 5V supply directly from the DC jack */ 59 compatible = "regulator-fixed"; 60 regulator-name = "vcc-5v"; 61 regulator-min-microvolt = <5000000>; 62 regulator-max-microvolt = <5000000>; 63 regulator-always-on; 64 }; 65}; 66 67&de { 68 status = "okay"; 69}; 70 71&ehci0 { 72 status = "okay"; 73}; 74 75&ehci3 { 76 status = "okay"; 77}; 78 79&gpu { 80 mali-supply = <®_dcdcc>; 81 status = "okay"; 82}; 83 84&hdmi { 85 status = "okay"; 86}; 87 88&hdmi_out { 89 hdmi_out_con: endpoint { 90 remote-endpoint = <&hdmi_con_in>; 91 }; 92}; 93 94&mmc0 { 95 vmmc-supply = <®_cldo1>; 96 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; 97 bus-width = <4>; 98 status = "okay"; 99}; 100 101&ohci0 { 102 status = "okay"; 103}; 104 105&ohci3 { 106 status = "okay"; 107}; 108 109&pio { 110 vcc-pc-supply = <®_bldo2>; 111 vcc-pd-supply = <®_cldo1>; 112 vcc-pg-supply = <®_aldo1>; 113}; 114 115&r_ir { 116 status = "okay"; 117}; 118 119&r_pio { 120 vcc-pm-supply = <®_bldo3>; 121}; 122 123&r_rsb { 124 status = "okay"; 125 126 axp805: pmic@745 { 127 compatible = "x-powers,axp805", "x-powers,axp806"; 128 reg = <0x745>; 129 interrupt-parent = <&r_intc>; 130 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; 131 interrupt-controller; 132 #interrupt-cells = <1>; 133 x-powers,self-working-mode; 134 vina-supply = <®_vcc5v>; 135 vinb-supply = <®_vcc5v>; 136 vinc-supply = <®_vcc5v>; 137 vind-supply = <®_vcc5v>; 138 vine-supply = <®_vcc5v>; 139 aldoin-supply = <®_vcc5v>; 140 bldoin-supply = <®_vcc5v>; 141 cldoin-supply = <®_vcc5v>; 142 143 regulators { 144 reg_aldo1: aldo1 { 145 regulator-always-on; 146 regulator-min-microvolt = <3300000>; 147 regulator-max-microvolt = <3300000>; 148 regulator-name = "vcc-pl"; 149 }; 150 151 reg_aldo2: aldo2 { 152 regulator-min-microvolt = <3300000>; 153 regulator-max-microvolt = <3300000>; 154 regulator-name = "vcc-ac200"; 155 }; 156 157 reg_aldo3: aldo3 { 158 regulator-always-on; 159 regulator-min-microvolt = <3300000>; 160 regulator-max-microvolt = <3300000>; 161 regulator-name = "vcc25-dram"; 162 }; 163 164 reg_bldo1: bldo1 { 165 regulator-always-on; 166 regulator-min-microvolt = <1800000>; 167 regulator-max-microvolt = <1800000>; 168 regulator-name = "vcc-bias-pll"; 169 }; 170 171 reg_bldo2: bldo2 { 172 regulator-always-on; 173 regulator-min-microvolt = <1800000>; 174 regulator-max-microvolt = <1800000>; 175 regulator-name = "vcc-efuse-pcie-hdmi-io"; 176 }; 177 178 reg_bldo3: bldo3 { 179 regulator-always-on; 180 regulator-min-microvolt = <1800000>; 181 regulator-max-microvolt = <1800000>; 182 regulator-name = "vcc-dcxoio"; 183 }; 184 185 bldo4 { 186 /* unused */ 187 }; 188 189 reg_cldo1: cldo1 { 190 regulator-always-on; 191 regulator-min-microvolt = <3300000>; 192 regulator-max-microvolt = <3300000>; 193 regulator-name = "vcc-3v3"; 194 }; 195 196 reg_cldo2: cldo2 { 197 regulator-min-microvolt = <3300000>; 198 regulator-max-microvolt = <3300000>; 199 regulator-name = "vcc-wifi-1"; 200 }; 201 202 reg_cldo3: cldo3 { 203 regulator-min-microvolt = <3300000>; 204 regulator-max-microvolt = <3300000>; 205 regulator-name = "vcc-wifi-2"; 206 }; 207 208 reg_dcdca: dcdca { 209 regulator-always-on; 210 regulator-min-microvolt = <810000>; 211 regulator-max-microvolt = <1080000>; 212 regulator-name = "vdd-cpu"; 213 }; 214 215 reg_dcdcc: dcdcc { 216 regulator-enable-ramp-delay = <32000>; 217 regulator-min-microvolt = <810000>; 218 regulator-max-microvolt = <1080000>; 219 regulator-name = "vdd-gpu"; 220 }; 221 222 reg_dcdcd: dcdcd { 223 regulator-always-on; 224 regulator-min-microvolt = <960000>; 225 regulator-max-microvolt = <960000>; 226 regulator-name = "vdd-sys"; 227 }; 228 229 reg_dcdce: dcdce { 230 regulator-always-on; 231 regulator-min-microvolt = <1200000>; 232 regulator-max-microvolt = <1200000>; 233 regulator-name = "vcc-dram"; 234 }; 235 236 sw { 237 /* unused */ 238 }; 239 }; 240 }; 241}; 242 243&rtc { 244 clocks = <&ext_osc32k>; 245}; 246 247&uart0 { 248 pinctrl-names = "default"; 249 pinctrl-0 = <&uart0_ph_pins>; 250 status = "okay"; 251}; 252 253&usb2otg { 254 /* 255 * OrangePi Lite 2 and One Plus, where this DT is used, don't 256 * have a controllable VBUS even though they do have an ID pin. 257 * Using it as anything but a USB host is unsafe. 258 */ 259 dr_mode = "host"; 260 status = "okay"; 261}; 262 263&usb2phy { 264 usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */ 265 usb0_vbus-supply = <®_vcc5v>; 266 usb3_vbus-supply = <®_vcc5v>; 267 status = "okay"; 268}; 269