1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> 3// Based on sun50i-a64-pine64.dts, which is: 4// Copyright (c) 2016 ARM Ltd. 5 6/dts-v1/; 7 8#include "sun50i-a64-sopine.dtsi" 9 10/ { 11 model = "SoPine with baseboard"; 12 compatible = "pine64,sopine-baseboard", "pine64,sopine", 13 "allwinner,sun50i-a64"; 14 15 aliases { 16 ethernet0 = &emac; 17 serial0 = &uart0; 18 serial1 = &uart1; 19 serial2 = &uart2; 20 serial3 = &uart3; 21 serial4 = &uart4; 22 }; 23 24 chosen { 25 stdout-path = "serial0:115200n8"; 26 }; 27 28 hdmi-connector { 29 compatible = "hdmi-connector"; 30 type = "a"; 31 32 port { 33 hdmi_con_in: endpoint { 34 remote-endpoint = <&hdmi_out_con>; 35 }; 36 }; 37 }; 38 39 reg_vcc1v8: vcc1v8 { 40 compatible = "regulator-fixed"; 41 regulator-name = "vcc1v8"; 42 regulator-min-microvolt = <1800000>; 43 regulator-max-microvolt = <1800000>; 44 }; 45}; 46 47&ac_power_supply { 48 status = "okay"; 49}; 50 51&battery_power_supply { 52 status = "okay"; 53}; 54 55&codec { 56 status = "okay"; 57}; 58 59&codec_analog { 60 status = "okay"; 61}; 62 63&dai { 64 status = "okay"; 65}; 66 67&de { 68 status = "okay"; 69}; 70 71&ehci0 { 72 status = "okay"; 73}; 74 75&ehci1 { 76 status = "okay"; 77}; 78 79&emac { 80 pinctrl-names = "default"; 81 pinctrl-0 = <&rgmii_pins>; 82 phy-mode = "rgmii-txid"; 83 phy-handle = <&ext_rgmii_phy>; 84 phy-supply = <®_dc1sw>; 85 status = "okay"; 86}; 87 88&hdmi { 89 hvcc-supply = <®_dldo1>; 90 status = "okay"; 91}; 92 93&hdmi_out { 94 hdmi_out_con: endpoint { 95 remote-endpoint = <&hdmi_con_in>; 96 }; 97}; 98 99&mdio { 100 ext_rgmii_phy: ethernet-phy@1 { 101 compatible = "ethernet-phy-ieee802.3-c22"; 102 reg = <1>; 103 }; 104}; 105 106&mmc2 { 107 pinctrl-names = "default"; 108 pinctrl-0 = <&mmc2_pins>; 109 vmmc-supply = <®_dcdc1>; 110 vqmmc-supply = <®_vcc1v8>; 111 bus-width = <8>; 112 non-removable; 113 cap-mmc-hw-reset; 114 mmc-hs200-1_8v; 115 status = "okay"; 116}; 117 118&ohci0 { 119 status = "okay"; 120}; 121 122&ohci1 { 123 status = "okay"; 124}; 125 126®_dc1sw { 127 /* 128 * Ethernet PHY needs 30ms to properly power up and some more 129 * to initialize. 100ms should be plenty of time to finish 130 * whole process. 131 */ 132 regulator-enable-ramp-delay = <100000>; 133 regulator-name = "vcc-phy"; 134}; 135 136®_dldo1 { 137 regulator-min-microvolt = <3300000>; 138 regulator-max-microvolt = <3300000>; 139 regulator-name = "vcc-hdmi"; 140}; 141 142®_dldo2 { 143 regulator-min-microvolt = <3300000>; 144 regulator-max-microvolt = <3300000>; 145 regulator-name = "vcc-mipi"; 146}; 147 148®_dldo4 { 149 regulator-min-microvolt = <3300000>; 150 regulator-max-microvolt = <3300000>; 151 regulator-name = "vcc-wifi"; 152}; 153 154&simplefb_hdmi { 155 vcc-hdmi-supply = <®_dldo1>; 156}; 157 158&sound { 159 simple-audio-card,aux-devs = <&codec_analog>; 160 simple-audio-card,widgets = "Microphone", "Microphone Jack", 161 "Headphone", "Headphone Jack"; 162 simple-audio-card,routing = 163 "Left DAC", "DACL", 164 "Right DAC", "DACR", 165 "Headphone Jack", "HP", 166 "ADCL", "Left ADC", 167 "ADCR", "Right ADC", 168 "MIC2", "Microphone Jack"; 169 status = "okay"; 170}; 171 172&uart0 { 173 pinctrl-names = "default"; 174 pinctrl-0 = <&uart0_pb_pins>; 175 status = "okay"; 176}; 177 178/* On Pi-2 connector */ 179&uart2 { 180 pinctrl-names = "default"; 181 pinctrl-0 = <&uart2_pins>; 182 status = "disabled"; 183}; 184 185/* On Euler connector */ 186&uart3 { 187 pinctrl-names = "default"; 188 pinctrl-0 = <&uart3_pins>; 189 status = "disabled"; 190}; 191 192/* On Euler connector, RTS/CTS optional */ 193&uart4 { 194 pinctrl-names = "default"; 195 pinctrl-0 = <&uart4_pins>; 196 status = "disabled"; 197}; 198 199&usb_otg { 200 dr_mode = "host"; 201 status = "okay"; 202}; 203 204&usbphy { 205 status = "okay"; 206}; 207