1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Xilinx ZC770 XM010 board DTS 4 * 5 * Copyright (C) 2013-2018 Xilinx, Inc. 6 */ 7/dts-v1/; 8#include "zynq-7000.dtsi" 9 10/ { 11 model = "Xilinx ZC770 XM010 board"; 12 compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; 13 14 aliases { 15 ethernet0 = &gem0; 16 i2c0 = &i2c0; 17 serial0 = &uart1; 18 spi1 = &spi1; 19 }; 20 21 chosen { 22 bootargs = ""; 23 stdout-path = "serial0:115200n8"; 24 }; 25 26 memory@0 { 27 device_type = "memory"; 28 reg = <0x0 0x40000000>; 29 }; 30 31 usb_phy0: phy0 { 32 compatible = "usb-nop-xceiv"; 33 #phy-cells = <0>; 34 }; 35}; 36 37&can0 { 38 status = "okay"; 39}; 40 41&gem0 { 42 status = "okay"; 43 phy-mode = "rgmii-id"; 44 phy-handle = <ðernet_phy>; 45 46 ethernet_phy: ethernet-phy@7 { 47 reg = <7>; 48 device_type = "ethernet-phy"; 49 }; 50}; 51 52&i2c0 { 53 status = "okay"; 54 clock-frequency = <400000>; 55 56 eeprom: eeprom@52 { 57 compatible = "atmel,24c02"; 58 reg = <0x52>; 59 }; 60 61}; 62 63&sdhci0 { 64 status = "okay"; 65}; 66 67&spi1 { 68 status = "okay"; 69 num-cs = <4>; 70 is-decoded-cs = <0>; 71 flash@1 { 72 compatible = "sst25wf080", "jedec,spi-nor"; 73 reg = <1>; 74 spi-max-frequency = <1000000>; 75 partitions { 76 compatible = "fixed-partitions"; 77 #address-cells = <1>; 78 #size-cells = <1>; 79 partition@0 { 80 label = "data"; 81 reg = <0x0 0x100000>; 82 }; 83 }; 84 }; 85}; 86 87&uart1 { 88 status = "okay"; 89}; 90 91&usb0 { 92 status = "okay"; 93 dr_mode = "host"; 94 usb-phy = <&usb_phy0>; 95}; 96