xref: /freebsd/sys/contrib/device-tree/src/arm/xilinx/zynq-ebaz4205.dts (revision 5b56413d04e608379c9a306373554a8e4d321bc0) 
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2021 Michael Walle <michael@walle.cc>
4 */
5/dts-v1/;
6/include/ "zynq-7000.dtsi"
7
8/ {
9	model = "Ebang EBAZ4205";
10	compatible = "ebang,ebaz4205", "xlnx,zynq-7000";
11
12	aliases {
13		ethernet0 = &gem0;
14		serial0 = &uart1;
15	};
16
17	memory@0 {
18		device_type = "memory";
19		reg = <0x0 0x10000000>;
20	};
21
22	chosen {
23		stdout-path = "serial0:115200n8";
24	};
25};
26
27&clkc {
28	ps-clk-frequency = <33333333>;
29	fclk-enable = <8>;
30};
31
32&gem0 {
33	status = "okay";
34	phy-mode = "mii";
35	phy-handle = <&phy>;
36
37	/* PHY clock */
38	assigned-clocks = <&clkc 18>;
39	assigned-clock-rates = <25000000>;
40
41	phy: ethernet-phy@0 {
42		reg = <0>;
43	};
44};
45
46&gpio0 {
47	pinctrl-names = "default";
48	pinctrl-0 = <&pinctrl_gpio0_default>;
49};
50
51&nfc0 {
52	status = "okay";
53
54	nand@0 {
55		reg = <0>;
56	};
57};
58
59&pinctrl0 {
60	pinctrl_gpio0_default: gpio0-default {
61		mux {
62			groups = "gpio0_20_grp", "gpio0_32_grp";
63			function = "gpio0";
64		};
65
66		conf {
67			groups = "gpio0_20_grp", "gpio0_32_grp";
68			io-standard = <3>;
69			slew-rate = <0>;
70		};
71
72		conf-pull-up {
73			pins = "MIO20", "MIO32";
74			bias-disable;
75		};
76	};
77
78	pinctrl_sdhci0_default: sdhci0-default {
79		mux {
80			groups = "sdio0_2_grp";
81			function = "sdio0";
82		};
83
84		conf {
85			groups = "sdio0_2_grp";
86			io-standard = <3>;
87			slew-rate = <0>;
88			bias-disable;
89		};
90
91		mux-cd {
92			groups = "gpio0_34_grp";
93			function = "sdio0_cd";
94		};
95
96		conf-cd {
97			groups = "gpio0_34_grp";
98			io-standard = <3>;
99			slew-rate = <0>;
100			bias-high-impedance;
101			bias-pull-up;
102		};
103	};
104
105	pinctrl_uart1_default: uart1-default {
106		mux {
107			groups = "uart1_4_grp";
108			function = "uart1";
109		};
110
111		conf {
112			groups = "uart1_4_grp";
113			io-standard = <3>;
114			slew-rate = <0>;
115		};
116
117		conf-rx {
118			pins = "MIO25";
119			bias-high-impedance;
120		};
121
122		conf-tx {
123			pins = "MIO24";
124			bias-disable;
125		};
126	};
127};
128
129&smcc {
130	status = "okay";
131};
132
133&sdhci0 {
134	status = "okay";
135	disable-wp;
136	pinctrl-names = "default";
137	pinctrl-0 = <&pinctrl_sdhci0_default>;
138};
139
140&uart1 {
141	status = "okay";
142	pinctrl-names = "default";
143	pinctrl-0 = <&pinctrl_uart1_default>;
144};
145