1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Suppport for CompuLab SBC-T3517 with CM-T3517 4 */ 5 6#include "omap3-cm-t3517.dts" 7#include "omap3-sb-t35.dtsi" 8 9/ { 10 model = "CompuLab SBC-T3517 with CM-T3517"; 11 compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3"; 12 13 aliases { 14 display0 = &dvi0; 15 display1 = &tv0; 16 }; 17 18 /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */ 19 vddvario: regulator-vddvario-sb-t35 { 20 compatible = "regulator-fixed"; 21 regulator-name = "vddvario"; 22 regulator-always-on; 23 }; 24 25 vdd33a: regulator-vdd33a-sb-t35 { 26 compatible = "regulator-fixed"; 27 regulator-name = "vdd33a"; 28 regulator-always-on; 29 }; 30}; 31 32&omap3_pmx_core { 33 pinctrl-names = "default"; 34 pinctrl-0 = < 35 &sb_t35_usb_hub_pins 36 &usb_hub_pins 37 >; 38 39 mmc1_aux_pins: mmc1-aux-pins { 40 pinctrl-single,pins = < 41 OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59 */ 42 OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */ 43 >; 44 }; 45 46 sb_t35_usb_hub_pins: sb-t35-usb-hub-pins { 47 pinctrl-single,pins = < 48 OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */ 49 >; 50 }; 51}; 52 53&mmc1 { 54 pinctrl-names = "default"; 55 pinctrl-0 = < 56 &mmc1_pins 57 &mmc1_aux_pins 58 >; 59 60 wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */ 61 cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ 62}; 63 64&dss { 65 port { 66 dpi_out: endpoint { 67 remote-endpoint = <&tfp410_in>; 68 data-lines = <24>; 69 }; 70 }; 71}; 72 73&gpmc { 74 ranges = <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */ 75 <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */ 76}; 77