1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 4 * Copyright (C) 2014 Stefan Roese <sr@denx.de> 5 */ 6 7#include "omap3-tao3530.dtsi" 8 9/ { 10 gpio_poweroff { 11 pinctrl-names = "default"; 12 pinctrl-0 = <&poweroff_pins>; 13 14 compatible = "gpio-poweroff"; 15 gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; /* GPIO 168 */ 16 }; 17}; 18 19&omap3_pmx_core { 20 sound2_pins: sound2-pins { 21 pinctrl-single,pins = < 22 OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4) /* gpmc_d8 gpio_44 */ 23 >; 24 }; 25 26 led_blue_pins: led-blue-pins { 27 pinctrl-single,pins = < 28 OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4) /* cam_xclka gpio_96, LED blue */ 29 >; 30 }; 31 32 led_green_pins: led-green-pins { 33 pinctrl-single,pins = < 34 OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4) /* cam_d8 gpio_107, LED green */ 35 >; 36 }; 37 38 led_red_pins: led-red-pins { 39 pinctrl-single,pins = < 40 OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* cam_xclkb gpio_111, LED red */ 41 >; 42 }; 43 44 poweroff_pins: poweroff-pins { 45 pinctrl-single,pins = < 46 OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4) /* i2c2_scl gpio_168 */ 47 >; 48 }; 49 50 powerdown_input_pins: powerdown-input-pins { 51 pinctrl-single,pins = < 52 OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4) /* i2c2_sda gpio_183 */ 53 >; 54 }; 55 56 fpga_boot0_pins: fpga-boot0-pins { 57 pinctrl-single,pins = < 58 OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2 gpio_101 */ 59 OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4) /* cam_d3 gpio_102 */ 60 OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4) /* cam_d4 gpio_103 */ 61 OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d5 gpio_104 */ 62 >; 63 }; 64 65 fpga_boot1_pins: fpga-boot1-pins { 66 pinctrl-single,pins = < 67 OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4) /* gpmc_d10 gpio_46 */ 68 OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4) /* gpmc_d11 gpio_47 */ 69 OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4) /* gpmc_d12 gpio_48 */ 70 OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_d13 gpio_49 */ 71 >; 72 }; 73}; 74 75/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */ 76&i2c2 { 77 status = "disabled"; 78}; 79 80&i2c3 { 81 clock-frequency = <100000>; 82 83 pinctrl-names = "default"; 84 pinctrl-0 = <&i2c3_pins>; 85}; 86