1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Support for CompuLab CM-T3730 4 */ 5/dts-v1/; 6 7#include "omap36xx.dtsi" 8#include "omap3-cm-t3x30.dtsi" 9 10/ { 11 model = "CompuLab CM-T3730"; 12 compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3"; 13 14 wl12xx_vmmc2: wl12xx_vmmc2 { 15 compatible = "regulator-fixed"; 16 regulator-name = "vw1271"; 17 pinctrl-names = "default"; 18 pinctrl-0 = <&wl12xx_gpio>; 19 regulator-min-microvolt = <1800000>; 20 regulator-max-microvolt = <1800000>; 21 gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; /* gpio73 */ 22 startup-delay-us = <20000>; 23 enable-active-high; 24 }; 25 26 wl12xx_vaux2: wl12xx_vaux2 { 27 compatible = "regulator-fixed"; 28 regulator-name = "vwl1271_vaux2"; 29 regulator-min-microvolt = <1800000>; 30 regulator-max-microvolt = <1800000>; 31 vin-supply = <&vaux2>; 32 }; 33}; 34 35&omap3_pmx_wkup { 36 dss_dpi_pins_cm_t3730: dss-dpi-cm-t3730-pins { 37 pinctrl-single,pins = < 38 OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ 39 OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ 40 OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ 41 OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ 42 OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ 43 OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ 44 >; 45 }; 46}; 47 48&omap3_pmx_core { 49 50 mmc2_pins: mmc2-pins { 51 pinctrl-single,pins = < 52 OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ 53 OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ 54 OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ 55 OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ 56 OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ 57 OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ 58 >; 59 }; 60 61 wl12xx_gpio: wl12xx-gpio-pins { 62 pinctrl-single,pins = < 63 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */ 64 OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 */ 65 >; 66 }; 67}; 68 69&mmc2 { 70 pinctrl-names = "default"; 71 pinctrl-0 = <&mmc2_pins>; 72 vmmc-supply = <&wl12xx_vmmc2>; 73 vqmmc-supply = <&wl12xx_vaux2>; 74 non-removable; 75 bus-width = <4>; 76 cap-power-off-card; 77 78 #address-cells = <1>; 79 #size-cells = <0>; 80 wlcore: wlcore@2 { 81 compatible = "ti,wl1271"; 82 reg = <2>; 83 interrupt-parent = <&gpio5>; 84 interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */ 85 ref-clock-frequency = <38400000>; 86 }; 87}; 88 89&dss { 90 status = "okay"; 91 92 pinctrl-names = "default"; 93 pinctrl-0 = < 94 &dss_dpi_pins_common 95 &dss_dpi_pins_cm_t3730 96 >; 97}; 98 99