1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5/dts-v1/; 6 7#include "am3517.dtsi" 8#include "am3517-som.dtsi" 9#include "am3517-evm-ui.dtsi" 10#include <dt-bindings/input/input.h> 11 12/ { 13 model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)"; 14 compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3"; 15 16 aliases { 17 display0 = &lcd0; 18 }; 19 20 chosen { 21 stdout-path = &uart3; 22 }; 23 24 memory@80000000 { 25 device_type = "memory"; 26 reg = <0x80000000 0x10000000>; /* 256 MB */ 27 }; 28 29 vmmc_fixed: vmmc { 30 compatible = "regulator-fixed"; 31 regulator-name = "vmmc_fixed"; 32 regulator-min-microvolt = <3300000>; 33 regulator-max-microvolt = <3300000>; 34 }; 35 36 gpio-keys { 37 compatible = "gpio-keys-polled"; 38 poll-interval = <100>; 39 40 button-user { 41 label = "User Push Button"; 42 linux,code = <BTN_0>; 43 gpios = <&tca6416 5 GPIO_ACTIVE_LOW>; 44 }; 45 46 switch-1 { 47 label = "User Switch 1"; 48 linux,code = <BTN_1>; 49 gpios = <&tca6416 8 GPIO_ACTIVE_LOW>; 50 }; 51 52 switch-2 { 53 label = "User Switch 2"; 54 linux,code = <BTN_2>; 55 gpios = <&tca6416 9 GPIO_ACTIVE_LOW>; 56 }; 57 58 switch-3 { 59 label = "User Switch 3"; 60 linux,code = <BTN_3>; 61 gpios = <&tca6416 10 GPIO_ACTIVE_LOW>; 62 }; 63 64 switch-4 { 65 label = "User Switch 4"; 66 linux,code = <BTN_4>; 67 gpios = <&tca6416 11 GPIO_ACTIVE_LOW>; 68 }; 69 70 switch-5 { 71 label = "User Switch 5"; 72 linux,code = <BTN_5>; 73 gpios = <&tca6416 12 GPIO_ACTIVE_LOW>; 74 }; 75 76 switch-6 { 77 label = "User Switch 6"; 78 linux,code = <BTN_6>; 79 gpios = <&tca6416 13 GPIO_ACTIVE_LOW>; 80 }; 81 82 switch-7 { 83 label = "User Switch 7"; 84 linux,code = <BTN_7>; 85 gpios = <&tca6416 14 GPIO_ACTIVE_LOW>; 86 }; 87 88 switch-8 { 89 label = "User Switch 8"; 90 linux,code = <BTN_8>; 91 gpios = <&tca6416 15 GPIO_ACTIVE_LOW>; 92 }; 93 }; 94 95 gpio-leds { 96 compatible = "gpio-leds"; 97 98 pinctrl-names = "default"; 99 pinctrl-0 = <&leds_pins>; 100 101 user_led_1 { 102 label = "am3517evm:green:user_led_1"; 103 gpios = <&tca6416 7 GPIO_ACTIVE_LOW>; 104 default-state = "on"; 105 }; 106 107 user_led_2 { 108 label = "am3517evm:green:user_led_2"; 109 gpios = <&tca6416 6 GPIO_ACTIVE_LOW>; 110 default-state = "on"; 111 }; 112 113 user_led_3 { 114 label = "am3517evm:green:user_led_3"; 115 gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; 116 linux,default-trigger = "mmc0"; /* SD/MMC card activity */ 117 }; 118 119 user_led_4 { 120 label = "am3517evm:green:user_led_4"; 121 gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; 122 linux,default-trigger = "heartbeat"; 123 }; 124 }; 125 126 lcd0: display@0 { 127 /* This isn't the exact LCD, but the timings meet spec */ 128 /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */ 129 compatible = "newhaven,nhd-4.3-480272ef-atxl"; 130 label = "15"; 131 backlight = <&bl>; 132 enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */ 133 vcc-supply = <&vdd_io_reg>; 134 135 port { 136 lcd_in: endpoint { 137 remote-endpoint = <&dpi_out>; 138 }; 139 }; 140 }; 141 142 bl: backlight { 143 compatible = "pwm-backlight"; 144 pinctrl-names = "default"; 145 power-supply = <&vdd_io_reg>; 146 pinctrl-0 = <&backlight_pins>; 147 pwms = <&pwm11 0 5000000 0>; 148 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; 149 default-brightness-level = <7>; 150 enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */ 151 }; 152 153 pwm11: pwm-11 { 154 compatible = "ti,omap-dmtimer-pwm"; 155 pinctrl-names = "default"; 156 pinctrl-0 = <&pwm_pins>; 157 ti,timers = <&timer11>; 158 #pwm-cells = <3>; 159 ti,clock-source = <0x01>; 160 }; 161 162 /* HS USB Host PHY on PORT 1 */ 163 hsusb1_phy: hsusb1_phy { 164 pinctrl-names = "default"; 165 pinctrl-0 = <&hsusb1_rst_pins>; 166 compatible = "usb-nop-xceiv"; 167 reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ 168 #phy-cells = <0>; 169 }; 170}; 171 172&davinci_emac { 173 pinctrl-names = "default"; 174 pinctrl-0 = <ðernet_pins>; 175 phy-mode = "rmii"; 176 phy-handle = <ðphy0>; 177 status = "okay"; 178}; 179 180&davinci_mdio { 181 #address-cells = <1>; 182 #size-cells = <0>; 183 status = "okay"; 184 185 ethphy0: ethernet-phy@0 { 186 pinctrl-names = "default"; 187 pinctrl-0 = <&enet_phy_pins>; 188 compatible = "ethernet-phy-ieee802.3-c22"; 189 reg = <0>; 190 interrupt-parent = <&gpio2>; 191 interrupts = <26 IRQ_TYPE_LEVEL_LOW>; /* gpio_58 */ 192 }; 193}; 194 195&dss { 196 status = "okay"; 197 198 pinctrl-names = "default"; 199 pinctrl-0 = <&dss_dpi_pins>; 200 201 vdds_dsi-supply = <&vdd_io_reg>; 202 vdda_video-supply = <&vdd_io_reg>; 203 204 port { 205 dpi_out: endpoint { 206 remote-endpoint = <&lcd_in>; 207 data-lines = <16>; 208 }; 209 }; 210}; 211 212&i2c2 { 213 pinctrl-names = "default"; 214 pinctrl-0 = <&i2c2_pins>; 215 clock-frequency = <400000>; 216 /* User DIP swithes [1:8] / User LEDS [1:2] */ 217 tca6416: gpio@21 { 218 compatible = "ti,tca6416"; 219 reg = <0x21>; 220 gpio-controller; 221 #gpio-cells = <2>; 222 vcc-supply = <&vdd_io_reg>; 223 }; 224}; 225 226&i2c3 { 227 pinctrl-names = "default"; 228 pinctrl-0 = <&i2c3_pins>; 229 clock-frequency = <400000>; 230}; 231 232&mmc1 { 233 status = "okay"; 234 pinctrl-names = "default"; 235 pinctrl-0 = <&mmc1_pins>; 236 vmmc-supply = <&vmmc_fixed>; 237 bus-width = <4>; 238 wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ 239 cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */ 240}; 241 242&mmc3 { 243 status = "disabled"; 244}; 245 246&usbhshost { 247 pinctrl-names = "default"; 248 pinctrl-0 = <&hsusb1_pins>; 249 port1-mode = "ehci-phy"; 250}; 251 252&usbhsehci { 253 phys = <&hsusb1_phy>; 254}; 255 256&omap3_pmx_core { 257 258 ethernet_pins: ethernet-pins { 259 pinctrl-single,pins = < 260 OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */ 261 OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */ 262 OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */ 263 OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */ 264 OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */ 265 OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */ 266 OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */ 267 OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */ 268 OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */ 269 OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */ 270 >; 271 }; 272 273 enet_phy_pins: ethernet-phy-pins { 274 pinctrl-single,pins = < 275 OMAP3_CORE1_IOPAD(0x20bc, PIN_INPUT | MUX_MODE4) /* gpmc_ncs7.gpio_57 */ 276 >; 277 }; 278 279 i2c2_pins: i2c2-pins { 280 pinctrl-single,pins = < 281 OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ 282 OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ 283 >; 284 }; 285 286 i2c3_pins: i2c3-pins { 287 pinctrl-single,pins = < 288 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ 289 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ 290 >; 291 }; 292 293 mmc1_pins: mmc1-pins { 294 pinctrl-single,pins = < 295 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ 296 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ 297 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ 298 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 299 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 300 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ 301 OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */ 302 OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */ 303 >; 304 }; 305 306 pwm_pins: pwm-pins { 307 pinctrl-single,pins = < 308 OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1) /* mcspi2_cs0.gpt11_pwm */ 309 >; 310 }; 311 312 backlight_pins: backlight-pins { 313 pinctrl-single,pins = < 314 OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */ 315 >; 316 }; 317 318 dss_dpi_pins: dss-dpi-pins { 319 pinctrl-single,pins = < 320 OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ 321 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ 322 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ 323 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ 324 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ 325 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ 326 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ 327 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ 328 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ 329 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ 330 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ 331 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ 332 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ 333 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ 334 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ 335 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ 336 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ 337 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ 338 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ 339 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ 340 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ 341 >; 342 }; 343 344 hsusb1_rst_pins: hsusb1-rst-pins { 345 pinctrl-single,pins = < 346 OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ 347 >; 348 }; 349}; 350 351&omap3_pmx_core2 { 352 353 hsusb1_pins: hsusb1-pins { 354 pinctrl-single,pins = < 355 OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ 356 OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ 357 OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */ 358 OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */ 359 OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */ 360 OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */ 361 OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */ 362 OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */ 363 OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */ 364 OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */ 365 OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */ 366 OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */ 367 >; 368 }; 369}; 370 371&omap3_pmx_wkup { 372 leds_pins: leds-pins { 373 pinctrl-single,pins = < 374 OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */ 375 OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */ 376 >; 377 }; 378}; 379