xref: /freebsd/sys/contrib/device-tree/src/arm/ti/omap/am335x-osd3358-sm-red.dts (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c)
1//SPDX-License-Identifier: GPL-2.0
2/* Copyright (C) 2018 Octavo Systems LLC - https://www.octavosystems.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9/dts-v1/;
10
11#include "am33xx.dtsi"
12#include "am335x-osd335x-common.dtsi"
13#include <dt-bindings/interrupt-controller/irq.h>
14
15#include <dt-bindings/display/tda998x.h>
16
17/ {
18	model = "Octavo Systems OSD3358-SM-RED";
19	compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
20};
21
22&ldo3_reg {
23	regulator-min-microvolt = <1800000>;
24	regulator-max-microvolt = <1800000>;
25	regulator-always-on;
26};
27
28&mmc2 {
29	vmmc-supply = <&vmmcsd_fixed>;
30	pinctrl-names = "default";
31	pinctrl-0 = <&emmc_pins>;
32	bus-width = <8>;
33	status = "okay";
34};
35
36&lcdc {
37	status = "okay";
38
39	/* If you want to get 24 bit RGB and 16 BGR mode instead of
40	 * current 16 bit RGB and 24 BGR modes, set the propety
41	 * below to "crossed" and uncomment the video-ports -property
42	 * in tda19988 node.
43	 * AM335x errata for wiring:
44	 * https://www.ti.com/lit/er/sprz360i/sprz360i.pdf
45	 */
46
47	blue-and-red-wiring = "straight";
48
49	port {
50		lcdc_0: endpoint {
51			remote-endpoint = <&hdmi_0>;
52		};
53	};
54};
55
56&i2c0 {
57	tda19988: hdmi-encoder@70 {
58		compatible = "nxp,tda998x";
59		reg = <0x70>;
60
61		pinctrl-names = "default", "off";
62		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
63		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
64
65		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
66		/* video-ports = <0x234501>; */
67
68		#sound-dai-cells = <0>;
69		audio-ports = <	TDA998x_I2S	0x03>;
70
71		port {
72			hdmi_0: endpoint {
73				remote-endpoint = <&lcdc_0>;
74			};
75		};
76	};
77
78	mpu9250: imu@68 {
79		compatible = "invensense,mpu6050";
80		reg = <0x68>;
81		interrupt-parent = <&gpio3>;
82		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
83		i2c-gate {
84			#address-cells = <1>;
85			#size-cells = <0>;
86			ax8975@c {
87				compatible = "asahi-kasei,ak8975";
88				reg = <0x0c>;
89			};
90		};
91		/*invensense,int_config = <0x10>;
92		invensense,level_shifter = <0>;
93		invensense,orientation = [01 00 00 00 01 00 00 00 01];
94		invensense,sec_slave_type = <0>;
95		invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
96	};
97
98	bmp280: pressure@76 {
99		compatible = "bosch,bmp280";
100		reg = <0x76>;
101	};
102};
103
104&mcasp0 {
105	#sound-dai-cells = <0>;
106	pinctrl-names = "default";
107	pinctrl-0 = <&mcasp0_pins>;
108	status = "okay";
109	op-mode = <0>;	/* MCASP_IIS_MODE */
110	tdm-slots = <2>;
111	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
112			0 0 1 0
113		>;
114	tx-num-evt = <32>;
115	rx-num-evt = <32>;
116};
117
118/ {
119	clk_mcasp0_fixed: clk-mcasp0-fixed {
120		#clock-cells = <0>;
121		compatible = "fixed-clock";
122		clock-frequency = <24576000>;
123	};
124
125	clk_mcasp0: clk-mcasp0 {
126		#clock-cells = <0>;
127		compatible = "gpio-gate-clock";
128		clocks = <&clk_mcasp0_fixed>;
129		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
130	};
131
132	sound {
133		compatible = "simple-audio-card";
134		simple-audio-card,name = "TI BeagleBone Black";
135		simple-audio-card,format = "i2s";
136		simple-audio-card,bitclock-master = <&dailink0_master>;
137		simple-audio-card,frame-master = <&dailink0_master>;
138
139		dailink0_master: simple-audio-card,cpu {
140			sound-dai = <&mcasp0>;
141			clocks = <&clk_mcasp0>;
142		};
143
144		simple-audio-card,codec {
145			sound-dai = <&tda19988>;
146		};
147	};
148
149	chosen {
150		stdout-path = &uart0;
151	};
152
153	leds {
154		pinctrl-names = "default";
155		pinctrl-0 = <&user_leds_s0>;
156
157		compatible = "gpio-leds";
158
159		led2 {
160			label = "beaglebone:green:usr0";
161			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
162			linux,default-trigger = "heartbeat";
163			default-state = "off";
164		};
165
166		led3 {
167			label = "beaglebone:green:usr1";
168			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
169			linux,default-trigger = "mmc0";
170			default-state = "off";
171		};
172
173		led4 {
174			label = "beaglebone:green:usr2";
175			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
176			linux,default-trigger = "cpu0";
177			default-state = "off";
178		};
179
180		led5 {
181			label = "beaglebone:green:usr3";
182			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
183			linux,default-trigger = "mmc1";
184			default-state = "off";
185		};
186	};
187
188	vmmcsd_fixed: fixedregulator0 {
189		compatible = "regulator-fixed";
190		regulator-name = "vmmcsd_fixed";
191		regulator-min-microvolt = <3300000>;
192		regulator-max-microvolt = <3300000>;
193	};
194};
195
196&am33xx_pinmux {
197	pinctrl-names = "default";
198	pinctrl-0 = <&clkout2_pin>;
199
200	nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
201		pinctrl-single,pins = <
202			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
203			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
204			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
205			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
206			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
207			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
208			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
209			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
210			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
211			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
212			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
213			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
214			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
215			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
216			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
217			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
218			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
219			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
220			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
221			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
222			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
223		>;
224	};
225
226	nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
227		pinctrl-single,pins = <
228			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
229		>;
230	};
231
232	mcasp0_pins: mcasp0-pins {
233		pinctrl-single,pins = <
234			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
235			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
236			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
237			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
238			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
239		>;
240	};
241
242	flash_enable: flash-enable-pins {
243		pinctrl-single,pins = <
244			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* rmii1_ref_clk.gpio0_29 */
245		>;
246	};
247
248	imu_interrupt: imu-interrupt-pins {
249		pinctrl-single,pins = <
250			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mii1_rx_er.gpio3_2 */
251		>;
252	};
253
254	ethernet_interrupt: ethernet-interrupt-pins {
255		pinctrl-single,pins = <
256			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mii1_col.gpio3_0 */
257		>;
258	};
259
260	user_leds_s0: user-leds-s0-pins {
261		pinctrl-single,pins = <
262			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
263			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
264			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
265			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
266		>;
267	};
268
269	i2c2_pins: pinmux-i2c2-pins {
270		pinctrl-single,pins = <
271			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
272			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
273		>;
274	};
275
276	uart0_pins: pinmux-uart0-pins {
277		pinctrl-single,pins = <
278			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
279			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
280		>;
281	};
282
283	clkout2_pin: pinmux-clkout2-pins {
284		pinctrl-single,pins = <
285			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
286		>;
287	};
288
289	cpsw_default: cpsw-default-pins {
290		pinctrl-single,pins = <
291			/* Slave 1 */
292			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
293			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* mii1_rxdv.rgmii1_rctl */
294			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
295			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
296			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
297			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
298			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
299			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
300			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
301			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
302			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
303			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
304		>;
305	};
306
307	cpsw_sleep: cpsw-sleep-pins {
308		pinctrl-single,pins = <
309			/* Slave 1 reset value */
310			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
311			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
312			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
313			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
314			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
315			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
316			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
317			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
318			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
319			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
320			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
321			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
322		>;
323	};
324
325	davinci_mdio_default: davinci-mdio-default-pins {
326		pinctrl-single,pins = <
327			/* MDIO */
328			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
329			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
330		>;
331	};
332
333	davinci_mdio_sleep: davinci-mdio-sleep-pins {
334		pinctrl-single,pins = <
335			/* MDIO reset value */
336			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
337			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
338		>;
339	};
340
341	mmc1_pins: pinmux-mmc1-pins {
342		pinctrl-single,pins = <
343			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
344			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
345			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
346			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
347			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
348			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
349			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
350		>;
351	};
352
353	emmc_pins: pinmux-emmc-pins {
354		pinctrl-single,pins = <
355			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
356			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
357			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
358			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
359			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
360			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
361			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
362			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
363			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
364			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
365		>;
366	};
367};
368
369
370&uart0 {
371	pinctrl-names = "default";
372	pinctrl-0 = <&uart0_pins>;
373
374	status = "okay";
375};
376
377&usb0 {
378	dr_mode = "peripheral";
379	interrupts-extended = <&intc 18 &tps 0>;
380	interrupt-names = "mc", "vbus";
381};
382
383&usb1 {
384	dr_mode = "host";
385};
386
387&i2c2 {
388	pinctrl-names = "default";
389	pinctrl-0 = <&i2c2_pins>;
390	status = "okay";
391	clock-frequency = <100000>;
392};
393
394&cpsw_port1 {
395	phy-handle = <&ethphy0>;
396	phy-mode = "rgmii-txid";
397	ti,dual-emac-pvid = <1>;
398};
399
400&cpsw_port2 {
401	status = "disabled";
402};
403
404&mac_sw {
405	pinctrl-names = "default", "sleep";
406	pinctrl-0 = <&cpsw_default>;
407	pinctrl-1 = <&cpsw_sleep>;
408	status = "okay";
409};
410
411&davinci_mdio_sw {
412	pinctrl-names = "default", "sleep";
413	pinctrl-0 = <&davinci_mdio_default>;
414	pinctrl-1 = <&davinci_mdio_sleep>;
415
416	ethphy0: ethernet-phy@4 {
417		reg = <4>;
418	};
419};
420
421&mmc1 {
422	status = "okay";
423	vmmc-supply = <&vmmcsd_fixed>;
424	bus-width = <0x4>;
425	pinctrl-names = "default";
426	pinctrl-0 = <&mmc1_pins>;
427	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
428};
429
430&rtc {
431	system-power-controller;
432	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
433	clock-names = "ext-clk", "int-clk";
434};
435