xref: /freebsd/sys/contrib/device-tree/src/arm/ti/omap/am335x-baltos-ir5221.dts (revision f126890ac5386406dadf7c4cfa9566cbb56537c5)
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
4 */
5
6/*
7 * VScom OnRISC
8 * http://www.vscom.de
9 */
10
11/dts-v1/;
12
13#include "am335x-baltos.dtsi"
14#include "am335x-baltos-leds.dtsi"
15
16/ {
17	model = "OnRISC Baltos iR 5221";
18};
19
20&am33xx_pinmux {
21	tca6416_pins: tca6416-pins {
22		pinctrl-single,pins = <
23			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
24		>;
25	};
26
27
28	dcan1_pins: dcan1-pins {
29		pinctrl-single,pins = <
30			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
31			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
32		>;
33	};
34
35	uart1_pins: uart1-pins {
36		pinctrl-single,pins = <
37			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
38			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
39			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
40			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
41			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
42			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
43			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
44			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
45		>;
46	};
47
48	uart2_pins: uart2-pins {
49		pinctrl-single,pins = <
50			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
51			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
52			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
53			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
54			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
55			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
56			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
57			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
58
59			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
60		>;
61	};
62
63	mmc1_pins: mmc1-pins {
64		pinctrl-single,pins = <
65			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
66		>;
67	};
68};
69
70&uart1 {
71	pinctrl-names = "default";
72	pinctrl-0 = <&uart1_pins>;
73	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
74	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
75	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
76	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
77
78	status = "okay";
79};
80
81&uart2 {
82	pinctrl-names = "default";
83	pinctrl-0 = <&uart2_pins>;
84	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
85	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
86	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
87	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
88
89	status = "okay";
90};
91
92&i2c1 {
93	tca6416: gpio@20 {
94		compatible = "ti,tca6416";
95		reg = <0x20>;
96		gpio-controller;
97		#gpio-cells = <2>;
98		interrupt-parent = <&gpio0>;
99		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
100		pinctrl-names = "default";
101		pinctrl-0 = <&tca6416_pins>;
102		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
103				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
104				  "ModeA0", "ModeA1", "ModeA2", "ModeA3",
105				  "ModeB0", "ModeB1", "ModeB2", "ModeB3";
106	};
107};
108
109&usb0_phy {
110	status = "okay";
111};
112
113&usb1_phy {
114	status = "okay";
115};
116
117&usb0 {
118	status = "okay";
119	dr_mode = "host";
120};
121
122&usb1 {
123	status = "okay";
124	dr_mode = "host";
125};
126
127&cpsw_port1 {
128	phy-mode = "rmii";
129	ti,dual-emac-pvid = <1>;
130	fixed-link {
131		speed = <100>;
132		full-duplex;
133	};
134};
135
136&cpsw_port2 {
137	phy-mode = "rgmii-id";
138	ti,dual-emac-pvid = <2>;
139	phy-handle = <&phy1>;
140};
141
142&dcan1 {
143	pinctrl-names = "default";
144	pinctrl-0 = <&dcan1_pins>;
145
146	status = "okay";
147};
148
149&mmc1 {
150	pinctrl-names = "default";
151	pinctrl-0 = <&mmc1_pins>;
152	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
153};
154
155&gpio0 {
156	gpio-line-names =
157		"MDIO",
158		"MDC",
159		"UART2_RX",
160		"UART2_TX",
161		"I2C1_SDA",
162		"I2C1_SCL",
163		"WLAN_BTN",
164		"W_DISABLE",
165		"NC",
166		"NC",
167		"NC",
168		"NC",
169		"UART1_CTSN",
170		"UART1_RTSN",
171		"UART1_RX",
172		"UART1_TX",
173		"onrisc:blue:wlan",
174		"onrisc:green:app",
175		"USB0_DRVVBUS",
176		"ETH2_INT",
177		"TCA6416_INT",
178		"RMII1_TXD1",
179		"MMC1_DAT0",
180		"MMC1_DAT1",
181		"NC",
182		"NC",
183		"MMC1_DAT2",
184		"MMC1_DAT3",
185		"RMII1_TXD0",
186		"NC",
187		"GPMC_WAIT0",
188		"GPMC_WP_N";
189};
190
191&gpio1 {
192	gpio-line-names =
193		"GPMC_AD0",
194		"GPMC_AD1",
195		"GPMC_AD2",
196		"GPMC_AD3",
197		"GPMC_AD4",
198		"GPMC_AD5",
199		"GPMC_AD6",
200		"GPMC_AD7",
201		"DCAN1_TX",
202		"DCAN1_RX",
203		"CONSOLE_RX",
204		"CONSOLE_TX",
205		"UART2_DTR",
206		"UART2_DSR",
207		"UART2_DCD",
208		"UART2_RI",
209		"RGMII2_TCTL",
210		"RGMII2_RCTL",
211		"RGMII2_TD3",
212		"RGMII2_TD2",
213		"RGMII2_TD1",
214		"RGMII2_TD0",
215		"RGMII2_TCLK",
216		"RGMII2_RCLK",
217		"RGMII2_RD3",
218		"RGMII2_RD2",
219		"RGMII2_RD1",
220		"RGMII2_RD0",
221		"PMIC_INT1",
222		"GPMC_CSN0_Flash",
223		"MMC1_CLK",
224		"MMC1_CMD";
225};
226
227&gpio2 {
228	gpio-line-names =
229		"GPMC_CSN3_BUS",
230		"GPMC_CLK",
231		"GPMC_ADVN_ALE",
232		"GPMC_OEN_RE_N",
233		"GPMC_WE_N",
234		"GPMC_BEN0_CLE",
235		"NC",
236		"NC",
237		"NC",
238		"NC",
239		"NC",
240		"NC",
241		"NC",
242		"NC",
243		"NC",
244		"NC",
245		"NC",
246		"NC",
247		"SD_CD",
248		"SD_WP",
249		"RMII1_RXD1",
250		"RMII1_RXD0",
251		"UART1_DTR",
252		"UART1_DSR",
253		"UART1_DCD",
254		"UART1_RI",
255		"MMC0_DAT3",
256		"MMC0_DAT2",
257		"MMC0_DAT1",
258		"MMC0_DAT0",
259		"MMC0_CLK",
260		"MMC0_CMD";
261};
262
263&gpio3 {
264	gpio-line-names =
265		"onrisc:red:power",
266		"RMII1_CRS_DV",
267		"RMII1_RXER",
268		"RMII1_TXEN",
269		"3G_PWR_EN",
270		"UART2_CTSN",
271		"UART2_RTSN",
272		"WLAN_IRQ",
273		"WLAN_EN",
274		"NC",
275		"NC",
276		"NC",
277		"NC",
278		"USB1_DRVVBUS",
279		"NC",
280		"NC",
281		"NC",
282		"NC",
283		"NC",
284		"NC",
285		"NC",
286		"NC",
287		"NC",
288		"NC",
289		"NC",
290		"NC",
291		"NC",
292		"NC",
293		"NC",
294		"NC",
295		"NC",
296		"NC";
297};
298