1// SPDX-License-Identifier: (GPL-2.0 OR MIT) 2// 3// Copyright (c) 2021 emtrion GmbH 4// Author: Reinhold Müller <reinhold.mueller@emtrion.de>. 5// 6 7#include "stm32mp157.dtsi" 8#include "stm32mp15xc.dtsi" 9#include "stm32mp15-pinctrl.dtsi" 10#include "stm32mp15xxac-pinctrl.dtsi" 11#include <dt-bindings/gpio/gpio.h> 12#include <dt-bindings/mfd/st,stpmic1.h> 13 14/ { 15 aliases { 16 ethernet0 = ðernet0; 17 serial0 = &uart4; 18 serial1 = &usart2; 19 serial2 = &usart3; 20 }; 21 22 chosen { 23 stdout-path = "serial0:115200n8"; 24 }; 25 26 memory@c0000000 { 27 device_type = "memory"; 28 reg = <0xc0000000 0x20000000>; 29 }; 30 31 reserved-memory { 32 #address-cells = <1>; 33 #size-cells = <1>; 34 ranges; 35 36 mcuram2: mcuram2@10000000 { 37 compatible = "shared-dma-pool"; 38 reg = <0x10000000 0x40000>; 39 no-map; 40 }; 41 42 vdev0vring0: vdev0vring0@10040000 { 43 compatible = "shared-dma-pool"; 44 reg = <0x10040000 0x2000>; 45 no-map; 46 }; 47 48 vdev0vring1: vdev0vring1@10042000 { 49 compatible = "shared-dma-pool"; 50 reg = <0x10042000 0x2000>; 51 no-map; 52 }; 53 54 vdev0buffer: vdev0buffer@10044000 { 55 compatible = "shared-dma-pool"; 56 reg = <0x10044000 0x4000>; 57 no-map; 58 }; 59 60 mcuram: mcuram@30000000 { 61 compatible = "shared-dma-pool"; 62 reg = <0x30000000 0x40000>; 63 no-map; 64 }; 65 66 retram: retram@38000000 { 67 compatible = "shared-dma-pool"; 68 reg = <0x38000000 0x10000>; 69 no-map; 70 }; 71 }; 72 73 led: gpio_leds { 74 compatible = "gpio-leds"; 75 led-0 { 76 label = "panic"; 77 gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; 78 linux,default-trigger = "none"; 79 default-state = "off"; 80 panic-indicator; 81 }; 82 led-1 { 83 label = "heartbeat"; 84 gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; 85 linux,default-trigger = "heartbeat"; 86 default-state = "on"; 87 }; 88 }; 89}; 90 91&adc { 92 vdd-supply = <&vdd>; 93 vdda-supply = <&vdd>; 94 vref-supply = <&vrefbuf>; 95 status = "okay"; 96 97 adc1: adc@0 { 98 pinctrl-names = "default"; 99 pinctrl-0 = <&adc1_in6_pins_a>; 100 status = "disabled"; 101 channel@6 { 102 reg = <6>; 103 st,min-sample-time-ns = <5000>; 104 }; 105 }; 106 107 adc2: adc@100 { 108 #address-cells = <1>; 109 #size-cells = <0>; 110 status = "okay"; 111 channel@12 { 112 reg = <12>; 113 label = "sense_temp"; 114 st,min-sample-time-ns = <9000>; 115 }; 116 channel@15 { 117 reg = <15>; 118 label = "vbat"; 119 st,min-sample-time-ns = <9000>; 120 }; 121 channel@16 { 122 reg = <16>; 123 label = "dac_out1"; 124 st,min-sample-time-ns = <9000>; 125 }; 126 channel@17 { 127 reg = <17>; 128 label = "dac_out1"; 129 st,min-sample-time-ns = <9000>; 130 }; 131 }; 132}; 133 134&crc1 { 135 status = "okay"; 136}; 137 138&cryp1 { 139 status = "okay"; 140}; 141 142&dac { 143 pinctrl-names = "default"; 144 pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; 145 vref-supply = <&vdda>; 146 status = "disabled"; 147 148 dac1: dac@1 { 149 status = "okay"; 150 }; 151 dac2: dac@2 { 152 status = "okay"; 153 }; 154}; 155 156&dts { 157 status = "okay"; 158}; 159 160ðernet0 { 161 status = "okay"; 162 snps,reset-gpio = <&gpioa 1 GPIO_ACTIVE_LOW>; 163 snps,reset-active-low; 164 snps,reset-delays-us = <0 30000 50000>; 165 pinctrl-0 = <ðernet0_rmii_pins_b>; 166 pinctrl-1 = <ðernet0_rmii_sleep_pins_b>; 167 pinctrl-names = "default", "sleep"; 168 phy-mode = "rmii"; 169 max-speed = <100>; 170 phy-handle = <&phy0>; 171 st,eth-ref-clk-sel; 172 173 mdio { 174 #address-cells = <1>; 175 #size-cells = <0>; 176 compatible = "snps,dwmac-mdio"; 177 phy0: ethernet-phy@0 { 178 reg = <0>; 179 }; 180 }; 181}; 182 183&hash1 { 184 status = "okay"; 185}; 186 187&i2c1 { 188 pinctrl-names = "default", "sleep"; 189 pinctrl-0 = <&i2c1_pins_a>; 190 pinctrl-1 = <&i2c1_sleep_pins_a>; 191 i2c-scl-rising-time-ns = <100>; 192 i2c-scl-falling-time-ns = <7>; 193 status = "disabled"; 194 /delete-property/dmas; 195 /delete-property/dma-names; 196}; 197 198&i2c4 { 199 pinctrl-names = "default", "sleep"; 200 pinctrl-0 = <&i2c4_pins_a>; 201 pinctrl-1 = <&i2c4_sleep_pins_a>; 202 i2c-scl-rising-time-ns = <185>; 203 i2c-scl-falling-time-ns = <20>; 204 status = "okay"; 205 /delete-property/dmas; 206 /delete-property/dma-names; 207 208 pmic: stpmic@33 { 209 compatible = "st,stpmic1"; 210 reg = <0x33>; 211 interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; 212 interrupt-controller; 213 #interrupt-cells = <2>; 214 status = "okay"; 215 216 regulators { 217 compatible = "st,stpmic1-regulators"; 218 219 ldo1-supply = <&v3v3>; 220 ldo3-supply = <&vdd_ddr>; 221 ldo6-supply = <&v3v3>; 222 pwr_sw1-supply = <&bst_out>; 223 pwr_sw2-supply = <&bst_out>; 224 225 vddcore: buck1 { 226 regulator-name = "vddcore"; 227 regulator-min-microvolt = <1200000>; 228 regulator-max-microvolt = <1350000>; 229 regulator-always-on; 230 regulator-initial-mode = <0>; 231 regulator-over-current-protection; 232 }; 233 234 vdd_ddr: buck2 { 235 regulator-name = "vdd_ddr"; 236 regulator-min-microvolt = <1350000>; 237 regulator-max-microvolt = <1350000>; 238 regulator-always-on; 239 regulator-initial-mode = <0>; 240 regulator-over-current-protection; 241 }; 242 243 vdd: buck3 { 244 regulator-name = "vdd"; 245 regulator-min-microvolt = <3300000>; 246 regulator-max-microvolt = <3300000>; 247 regulator-always-on; 248 st,mask-reset; 249 regulator-initial-mode = <0>; 250 regulator-over-current-protection; 251 }; 252 253 v3v3: buck4 { 254 regulator-name = "v3v3"; 255 regulator-min-microvolt = <3300000>; 256 regulator-max-microvolt = <3300000>; 257 regulator-always-on; 258 regulator-over-current-protection; 259 regulator-initial-mode = <0>; 260 }; 261 262 v1v8_audio: ldo1 { 263 regulator-name = "v1v8_audio"; 264 regulator-min-microvolt = <1800000>; 265 regulator-max-microvolt = <1800000>; 266 regulator-always-on; 267 interrupts = <IT_CURLIM_LDO1 0>; 268 }; 269 270 v3v3_hdmi: ldo2 { 271 regulator-name = "v3v3_hdmi"; 272 regulator-min-microvolt = <3300000>; 273 regulator-max-microvolt = <3300000>; 274 regulator-always-on; 275 interrupts = <IT_CURLIM_LDO2 0>; 276 }; 277 278 vtt_ddr: ldo3 { 279 regulator-name = "vtt_ddr"; 280 regulator-min-microvolt = <500000>; 281 regulator-max-microvolt = <750000>; 282 regulator-always-on; 283 regulator-over-current-protection; 284 }; 285 286 vdd_usb: ldo4 { 287 regulator-name = "vdd_usb"; 288 regulator-min-microvolt = <3300000>; 289 regulator-max-microvolt = <3300000>; 290 interrupts = <IT_CURLIM_LDO4 0>; 291 }; 292 293 vdd_sd: ldo5 { 294 regulator-name = "vdd_sd"; 295 regulator-min-microvolt = <3300000>; 296 regulator-max-microvolt = <3300000>; 297 interrupts = <IT_CURLIM_LDO5 0>; 298 regulator-always-on; 299 }; 300 301 vdda: ldo6 { 302 regulator-name = "vdda"; 303 regulator-min-microvolt = <2900000>; 304 regulator-max-microvolt = <2900000>; 305 regulator-always-on; 306 interrupts = <IT_CURLIM_LDO6 0>; 307 regulator-boot-on; 308 }; 309 310 vref_ddr: vref_ddr { 311 regulator-name = "vref_ddr"; 312 regulator-always-on; 313 }; 314 315 bst_out: boost { 316 regulator-name = "bst_out"; 317 interrupts = <IT_OCP_BOOST 0>; 318 }; 319 320 vbus_otg: pwr_sw1 { 321 regulator-name = "vbus_otg"; 322 interrupts = <IT_OCP_OTG 0>; 323 regulator-active-discharge = <1>; 324 }; 325 326 vbus_usbh: pwr_sw2 { 327 regulator-name = "usbh_vbus"; 328 interrupts = <IT_OCP_SWOUT 0>; 329 regulator-always-on; 330 regulator-boot-on; 331 }; 332 }; 333 334 onkey { 335 compatible = "st,stpmic1-onkey"; 336 interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; 337 interrupt-names = "onkey-falling", "onkey-rising"; 338 status = "okay"; 339 }; 340 341 watchdog { 342 compatible = "st,stpmic1-wdt"; 343 status = "disabled"; 344 }; 345 }; 346}; 347 348&i2c5 { 349 pinctrl-names = "default", "sleep"; 350 pinctrl-0 = <&i2c5_pins_a>; 351 pinctrl-1 = <&i2c5_sleep_pins_a>; 352 i2c-scl-rising-time-ns = <185>; 353 i2c-scl-falling-time-ns = <20>; 354 /delete-property/dmas; 355 /delete-property/dma-names; 356}; 357 358&ipcc { 359 status = "okay"; 360}; 361 362&iwdg2 { 363 timeout-sec = <32>; 364 status = "okay"; 365}; 366 367&m4_rproc { 368 memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, 369 <&vdev0vring1>, <&vdev0buffer>; 370 mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; 371 mbox-names = "vq0", "vq1", "shutdown", "detach"; 372 interrupt-parent = <&exti>; 373 interrupts = <68 1>; 374 interrupt-names = "wdg"; 375 recovery; 376 status = "okay"; 377}; 378 379&pwr_regulators { 380 vdd-supply = <&vdd>; 381 vdd_3v3_usbfs-supply = <&vdd_usb>; 382}; 383 384&qspi { 385 pinctrl-names = "default", "sleep"; 386 pinctrl-0 = <&qspi_clk_pins_a 387 &qspi_bk1_pins_a 388 &qspi_cs1_pins_a>; 389 pinctrl-1 = <&qspi_clk_sleep_pins_a 390 &qspi_bk1_sleep_pins_a 391 &qspi_cs1_sleep_pins_a>; 392 reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; 393 #address-cells = <1>; 394 #size-cells = <0>; 395 status = "okay"; 396 397 flash0: flash@0 { 398 compatible = "jedec,spi-nor"; 399 reg = <0>; 400 spi-max-frequency = <133000000>; 401 spi-rx-bus-width = <1>; 402 spi-tx-bus-width = <1>; 403 #address-cells = <1>; 404 #size-cells = <1>; 405 }; 406}; 407 408&rng1 { 409 status = "okay"; 410}; 411 412&rtc { 413 status = "okay"; 414}; 415 416&sdmmc2 { 417 arm,primecell-periphid = <0x10153180>; 418 pinctrl-names = "default", "opendrain", "sleep"; 419 pinctrl-0 = <&sdmmc2_b4_pins_b>; 420 pinctrl-1 = <&sdmmc2_b4_od_pins_b>; 421 pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>; 422 non-removable; 423 st,neg-edge; 424 bus-width = <4>; 425 vmmc-supply = <&v3v3>; 426 status = "okay"; 427}; 428 429&spi1 { 430 pinctrl-names = "default"; 431 pinctrl-0 = <&spi1_pins_a>; 432 cs-gpios = <&gpioz 3 0>; 433 status = "disabled"; 434}; 435 436&timers1 { 437 /* spare dmas for other usage */ 438 /delete-property/dmas; 439 /delete-property/dma-names; 440 pwm { 441 pinctrl-0 = <&pwm1_pins_b>; 442 pinctrl-1 = <&pwm1_sleep_pins_b>; 443 pinctrl-names = "default", "sleep"; 444 status = "okay"; 445 }; 446 timer@0 { 447 status = "okay"; 448 }; 449}; 450 451&timers4 { 452 /delete-property/dmas; 453 /delete-property/dma-names; 454 pwm { 455 pinctrl-0 = <&pwm4_pins_b>; 456 pinctrl-1 = <&pwm4_sleep_pins_b>; 457 pinctrl-names = "default", "sleep"; 458 status = "okay"; 459 }; 460 timer@3 { 461 status = "okay"; 462 }; 463}; 464 465&timers5 { 466 /delete-property/dmas; 467 /delete-property/dma-names; 468 pwm { 469 pinctrl-0 = <&pwm5_pins_a>; 470 pinctrl-1 = <&pwm5_sleep_pins_a>; 471 pinctrl-names = "default", "sleep"; 472 status = "okay"; 473 }; 474 timer@4 { 475 status = "okay"; 476 }; 477}; 478 479&uart4 { 480 pinctrl-names = "default", "sleep", "idle"; 481 pinctrl-0 = <&uart4_pins_a>; 482 pinctrl-1 = <&uart4_sleep_pins_a>; 483 pinctrl-2 = <&uart4_idle_pins_a>; 484 status = "okay"; 485}; 486 487&usart2 { 488 pinctrl-names = "default", "sleep"; 489 pinctrl-0 = <&usart2_pins_a>; 490 pinctrl-1 = <&usart2_sleep_pins_a>; 491 status = "okay"; 492}; 493 494&usart3 { 495 pinctrl-names = "default", "sleep", "idle"; 496 pinctrl-0 = <&usart3_pins_d>; 497 pinctrl-1 = <&usart3_sleep_pins_d>; 498 pinctrl-2 = <&usart3_idle_pins_d>; 499 status = "okay"; 500}; 501 502&usbh_ehci { 503 phys = <&usbphyc_port0>; 504 phy-names = "usb"; 505 status = "okay"; 506}; 507 508&usbh_ohci { 509 phys = <&usbphyc_port0>; 510 phy-names = "usb"; 511 status = "okay"; 512}; 513 514&usbotg_hs { 515 dr_mode = "peripheral"; 516 pinctrl-names = "default"; 517 pinctrl-0 = <&usbotg_hs_pins_a>; 518 phy-names = "usb2-phy"; 519 phys = <&usbphyc_port1 0>; 520 vbus-supply = <&vbus_otg>; 521 status = "okay"; 522}; 523 524&usbphyc { 525 status = "okay"; 526}; 527 528&usbphyc_port0 { 529 phy-supply = <&vdd_usb>; 530}; 531 532&usbphyc_port1 { 533 phy-supply = <&vdd_usb>; 534}; 535 536&vrefbuf { 537 regulator-min-microvolt = <2500000>; 538 regulator-max-microvolt = <2500000>; 539 vdda-supply = <&vdd>; 540 status = "okay"; 541}; 542 543