1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2012 Stefan Roese <sr@denx.de> 4 */ 5 6/dts-v1/; 7/include/ "spear600.dtsi" 8 9/ { 10 model = "ST SPEAr600 Evaluation Board"; 11 compatible = "st,spear600-evb", "st,spear600"; 12 #address-cells = <1>; 13 #size-cells = <1>; 14 15 memory { 16 device_type = "memory"; 17 reg = <0 0x10000000>; 18 }; 19}; 20 21&clcd { 22 status = "okay"; 23}; 24 25&dmac { 26 status = "okay"; 27}; 28 29&ehci_usb0 { 30 status = "okay"; 31}; 32 33&ehci_usb1 { 34 status = "okay"; 35}; 36 37&gmac { 38 phy-mode = "gmii"; 39 status = "okay"; 40}; 41 42&ohci_usb0 { 43 status = "okay"; 44}; 45 46&ohci_usb1 { 47 status = "okay"; 48}; 49 50&smi { 51 status = "okay"; 52 clock-rate = <50000000>; 53 54 flash@f8000000 { 55 reg = <0xf8000000 0x800000>; 56 st,smi-fast-mode; 57 58 partitions { 59 compatible = "fixed-partitions"; 60 #address-cells = <1>; 61 #size-cells = <1>; 62 63 partition@0 { 64 label = "xloader"; 65 reg = <0x0 0x10000>; 66 }; 67 partition@10000 { 68 label = "u-boot"; 69 reg = <0x10000 0x50000>; 70 }; 71 partition@60000 { 72 label = "environment"; 73 reg = <0x60000 0x10000>; 74 }; 75 partition@70000 { 76 label = "dtb"; 77 reg = <0x70000 0x10000>; 78 }; 79 partition@80000 { 80 label = "linux"; 81 reg = <0x80000 0x310000>; 82 }; 83 partition@390000 { 84 label = "rootfs"; 85 reg = <0x390000 0x0>; 86 }; 87 }; 88 }; 89}; 90 91&uart0 { 92 status = "okay"; 93}; 94 95&uart1 { 96 status = "okay"; 97}; 98 99&rtc { 100 status = "okay"; 101}; 102 103&i2c { 104 clock-frequency = <400000>; 105 status = "okay"; 106}; 107