xref: /freebsd/sys/contrib/device-tree/src/arm/socionext/uniphier-pxs2.dtsi (revision 96190b4fef3b4a0cc3ca0606b0c4e3e69a5e6717)
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2//
3// Device Tree Source for UniPhier PXs2 SoC
4//
5// Copyright (C) 2015-2016 Socionext Inc.
6//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
7
8#include <dt-bindings/gpio/uniphier-gpio.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/thermal/thermal.h>
11
12/ {
13	compatible = "socionext,uniphier-pxs2";
14	#address-cells = <1>;
15	#size-cells = <1>;
16
17	cpus {
18		#address-cells = <1>;
19		#size-cells = <0>;
20
21		cpu0: cpu@0 {
22			device_type = "cpu";
23			compatible = "arm,cortex-a9";
24			reg = <0>;
25			clocks = <&sys_clk 32>;
26			enable-method = "psci";
27			next-level-cache = <&l2>;
28			operating-points-v2 = <&cpu_opp>;
29			#cooling-cells = <2>;
30		};
31
32		cpu1: cpu@1 {
33			device_type = "cpu";
34			compatible = "arm,cortex-a9";
35			reg = <1>;
36			clocks = <&sys_clk 32>;
37			enable-method = "psci";
38			next-level-cache = <&l2>;
39			operating-points-v2 = <&cpu_opp>;
40			#cooling-cells = <2>;
41		};
42
43		cpu2: cpu@2 {
44			device_type = "cpu";
45			compatible = "arm,cortex-a9";
46			reg = <2>;
47			clocks = <&sys_clk 32>;
48			enable-method = "psci";
49			next-level-cache = <&l2>;
50			operating-points-v2 = <&cpu_opp>;
51			#cooling-cells = <2>;
52		};
53
54		cpu3: cpu@3 {
55			device_type = "cpu";
56			compatible = "arm,cortex-a9";
57			reg = <3>;
58			clocks = <&sys_clk 32>;
59			enable-method = "psci";
60			next-level-cache = <&l2>;
61			operating-points-v2 = <&cpu_opp>;
62			#cooling-cells = <2>;
63		};
64	};
65
66	cpu_opp: opp-table {
67		compatible = "operating-points-v2";
68		opp-shared;
69
70		opp-100000000 {
71			opp-hz = /bits/ 64 <100000000>;
72			clock-latency-ns = <300>;
73		};
74		opp-150000000 {
75			opp-hz = /bits/ 64 <150000000>;
76			clock-latency-ns = <300>;
77		};
78		opp-200000000 {
79			opp-hz = /bits/ 64 <200000000>;
80			clock-latency-ns = <300>;
81		};
82		opp-300000000 {
83			opp-hz = /bits/ 64 <300000000>;
84			clock-latency-ns = <300>;
85		};
86		opp-400000000 {
87			opp-hz = /bits/ 64 <400000000>;
88			clock-latency-ns = <300>;
89		};
90		opp-600000000 {
91			opp-hz = /bits/ 64 <600000000>;
92			clock-latency-ns = <300>;
93		};
94		opp-800000000 {
95			opp-hz = /bits/ 64 <800000000>;
96			clock-latency-ns = <300>;
97		};
98		opp-1200000000 {
99			opp-hz = /bits/ 64 <1200000000>;
100			clock-latency-ns = <300>;
101		};
102	};
103
104	psci {
105		compatible = "arm,psci-0.2";
106		method = "smc";
107	};
108
109	clocks {
110		refclk: ref {
111			compatible = "fixed-clock";
112			#clock-cells = <0>;
113			clock-frequency = <25000000>;
114		};
115
116		arm_timer_clk: arm-timer {
117			#clock-cells = <0>;
118			compatible = "fixed-clock";
119			clock-frequency = <50000000>;
120		};
121	};
122
123	thermal-zones {
124		cpu-thermal {
125			polling-delay-passive = <250>;	/* 250ms */
126			polling-delay = <1000>;		/* 1000ms */
127			thermal-sensors = <&pvtctl>;
128
129			trips {
130				cpu_crit: cpu-crit {
131					temperature = <95000>;	/* 95C */
132					hysteresis = <2000>;
133					type = "critical";
134				};
135				cpu_alert: cpu-alert {
136					temperature = <85000>;	/* 85C */
137					hysteresis = <2000>;
138					type = "passive";
139				};
140			};
141
142			cooling-maps {
143				map {
144					trip = <&cpu_alert>;
145					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
146							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
147							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
148							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
149				};
150			};
151		};
152	};
153
154	soc {
155		compatible = "simple-bus";
156		#address-cells = <1>;
157		#size-cells = <1>;
158		ranges;
159		interrupt-parent = <&intc>;
160
161		l2: cache-controller@500c0000 {
162			compatible = "socionext,uniphier-system-cache";
163			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
164			      <0x506c0000 0x400>;
165			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
166				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
167				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
168				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
169			cache-unified;
170			cache-size = <(1280 * 1024)>;
171			cache-sets = <512>;
172			cache-line-size = <128>;
173			cache-level = <2>;
174		};
175
176		spi0: spi@54006000 {
177			compatible = "socionext,uniphier-scssi";
178			status = "disabled";
179			reg = <0x54006000 0x100>;
180			#address-cells = <1>;
181			#size-cells = <0>;
182			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
183			pinctrl-names = "default";
184			pinctrl-0 = <&pinctrl_spi0>;
185			clocks = <&peri_clk 11>;
186			resets = <&peri_rst 11>;
187		};
188
189		spi1: spi@54006100 {
190			compatible = "socionext,uniphier-scssi";
191			status = "disabled";
192			reg = <0x54006100 0x100>;
193			#address-cells = <1>;
194			#size-cells = <0>;
195			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
196			pinctrl-names = "default";
197			pinctrl-0 = <&pinctrl_spi1>;
198			clocks = <&peri_clk 12>;
199			resets = <&peri_rst 12>;
200		};
201
202		serial0: serial@54006800 {
203			compatible = "socionext,uniphier-uart";
204			status = "disabled";
205			reg = <0x54006800 0x40>;
206			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
207			pinctrl-names = "default";
208			pinctrl-0 = <&pinctrl_uart0>;
209			clocks = <&peri_clk 0>;
210			resets = <&peri_rst 0>;
211		};
212
213		serial1: serial@54006900 {
214			compatible = "socionext,uniphier-uart";
215			status = "disabled";
216			reg = <0x54006900 0x40>;
217			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
218			pinctrl-names = "default";
219			pinctrl-0 = <&pinctrl_uart1>;
220			clocks = <&peri_clk 1>;
221			resets = <&peri_rst 1>;
222		};
223
224		serial2: serial@54006a00 {
225			compatible = "socionext,uniphier-uart";
226			status = "disabled";
227			reg = <0x54006a00 0x40>;
228			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
229			pinctrl-names = "default";
230			pinctrl-0 = <&pinctrl_uart2>;
231			clocks = <&peri_clk 2>;
232			resets = <&peri_rst 2>;
233		};
234
235		serial3: serial@54006b00 {
236			compatible = "socionext,uniphier-uart";
237			status = "disabled";
238			reg = <0x54006b00 0x40>;
239			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
240			pinctrl-names = "default";
241			pinctrl-0 = <&pinctrl_uart3>;
242			clocks = <&peri_clk 3>;
243			resets = <&peri_rst 3>;
244		};
245
246		gpio: gpio@55000000 {
247			compatible = "socionext,uniphier-gpio";
248			reg = <0x55000000 0x200>;
249			interrupt-parent = <&aidet>;
250			interrupt-controller;
251			#interrupt-cells = <2>;
252			gpio-controller;
253			#gpio-cells = <2>;
254			gpio-ranges = <&pinctrl 0 0 0>,
255				      <&pinctrl 96 0 0>;
256			gpio-ranges-group-names = "gpio_range0",
257						  "gpio_range1";
258			ngpios = <232>;
259			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
260						     <21 217 3>;
261		};
262
263		audio@56000000 {
264			compatible = "socionext,uniphier-pxs2-aio";
265			reg = <0x56000000 0x80000>;
266			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
267			pinctrl-names = "default";
268			pinctrl-0 = <&pinctrl_ain1>,
269				    <&pinctrl_ain2>,
270				    <&pinctrl_ainiec1>,
271				    <&pinctrl_aout2>,
272				    <&pinctrl_aout3>,
273				    <&pinctrl_aoutiec1>,
274				    <&pinctrl_aoutiec2>;
275			clock-names = "aio";
276			clocks = <&sys_clk 40>;
277			reset-names = "aio";
278			resets = <&sys_rst 40>;
279			#sound-dai-cells = <1>;
280			socionext,syscon = <&soc_glue>;
281
282			i2s_port0: port@0 {
283				i2s_hdmi: endpoint {
284				};
285			};
286
287			i2s_port1: port@1 {
288				i2s_line: endpoint {
289				};
290			};
291
292			i2s_port2: port@2 {
293				i2s_aux: endpoint {
294				};
295			};
296
297			spdif_port0: port@3 {
298				spdif_hiecout1: endpoint {
299				};
300			};
301
302			spdif_port1: port@4 {
303				spdif_iecout1: endpoint {
304				};
305			};
306
307			comp_spdif_port0: port@5 {
308				comp_spdif_hiecout1: endpoint {
309				};
310			};
311
312			comp_spdif_port1: port@6 {
313				comp_spdif_iecout1: endpoint {
314				};
315			};
316		};
317
318		i2c0: i2c@58780000 {
319			compatible = "socionext,uniphier-fi2c";
320			status = "disabled";
321			reg = <0x58780000 0x80>;
322			#address-cells = <1>;
323			#size-cells = <0>;
324			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
325			pinctrl-names = "default";
326			pinctrl-0 = <&pinctrl_i2c0>;
327			clocks = <&peri_clk 4>;
328			resets = <&peri_rst 4>;
329			clock-frequency = <100000>;
330		};
331
332		i2c1: i2c@58781000 {
333			compatible = "socionext,uniphier-fi2c";
334			status = "disabled";
335			reg = <0x58781000 0x80>;
336			#address-cells = <1>;
337			#size-cells = <0>;
338			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
339			pinctrl-names = "default";
340			pinctrl-0 = <&pinctrl_i2c1>;
341			clocks = <&peri_clk 5>;
342			resets = <&peri_rst 5>;
343			clock-frequency = <100000>;
344		};
345
346		i2c2: i2c@58782000 {
347			compatible = "socionext,uniphier-fi2c";
348			status = "disabled";
349			reg = <0x58782000 0x80>;
350			#address-cells = <1>;
351			#size-cells = <0>;
352			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
353			pinctrl-names = "default";
354			pinctrl-0 = <&pinctrl_i2c2>;
355			clocks = <&peri_clk 6>;
356			resets = <&peri_rst 6>;
357			clock-frequency = <100000>;
358		};
359
360		i2c3: i2c@58783000 {
361			compatible = "socionext,uniphier-fi2c";
362			status = "disabled";
363			reg = <0x58783000 0x80>;
364			#address-cells = <1>;
365			#size-cells = <0>;
366			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
367			pinctrl-names = "default";
368			pinctrl-0 = <&pinctrl_i2c3>;
369			clocks = <&peri_clk 7>;
370			resets = <&peri_rst 7>;
371			clock-frequency = <100000>;
372		};
373
374		/* chip-internal connection for DMD */
375		i2c4: i2c@58784000 {
376			compatible = "socionext,uniphier-fi2c";
377			reg = <0x58784000 0x80>;
378			#address-cells = <1>;
379			#size-cells = <0>;
380			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
381			clocks = <&peri_clk 8>;
382			resets = <&peri_rst 8>;
383			clock-frequency = <400000>;
384		};
385
386		/* chip-internal connection for STM */
387		i2c5: i2c@58785000 {
388			compatible = "socionext,uniphier-fi2c";
389			reg = <0x58785000 0x80>;
390			#address-cells = <1>;
391			#size-cells = <0>;
392			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
393			clocks = <&peri_clk 9>;
394			resets = <&peri_rst 9>;
395			clock-frequency = <400000>;
396		};
397
398		/* chip-internal connection for HDMI */
399		i2c6: i2c@58786000 {
400			compatible = "socionext,uniphier-fi2c";
401			reg = <0x58786000 0x80>;
402			#address-cells = <1>;
403			#size-cells = <0>;
404			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
405			clocks = <&peri_clk 10>;
406			resets = <&peri_rst 10>;
407			clock-frequency = <400000>;
408		};
409
410		system_bus: system-bus@58c00000 {
411			compatible = "socionext,uniphier-system-bus";
412			status = "disabled";
413			reg = <0x58c00000 0x400>;
414			#address-cells = <2>;
415			#size-cells = <1>;
416			pinctrl-names = "default";
417			pinctrl-0 = <&pinctrl_system_bus>;
418		};
419
420		smpctrl@59801000 {
421			compatible = "socionext,uniphier-smpctrl";
422			reg = <0x59801000 0x400>;
423		};
424
425		sdctrl: syscon@59810000 {
426			compatible = "socionext,uniphier-pxs2-sdctrl",
427				     "simple-mfd", "syscon";
428			reg = <0x59810000 0x400>;
429
430			sd_clk: clock-controller {
431				compatible = "socionext,uniphier-pxs2-sd-clock";
432				#clock-cells = <1>;
433			};
434
435			sd_rst: reset-controller {
436				compatible = "socionext,uniphier-pxs2-sd-reset";
437				#reset-cells = <1>;
438			};
439		};
440
441		syscon@59820000 {
442			compatible = "socionext,uniphier-pxs2-perictrl",
443				     "simple-mfd", "syscon";
444			reg = <0x59820000 0x200>;
445
446			peri_clk: clock-controller {
447				compatible = "socionext,uniphier-pxs2-peri-clock";
448				#clock-cells = <1>;
449			};
450
451			peri_rst: reset-controller {
452				compatible = "socionext,uniphier-pxs2-peri-reset";
453				#reset-cells = <1>;
454			};
455		};
456
457		emmc: mmc@5a000000 {
458			compatible = "socionext,uniphier-sd-v3.1.1";
459			status = "disabled";
460			reg = <0x5a000000 0x800>;
461			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
462			pinctrl-names = "default";
463			pinctrl-0 = <&pinctrl_emmc>;
464			clocks = <&sd_clk 1>;
465			reset-names = "host", "hw";
466			resets = <&sd_rst 1>, <&sd_rst 6>;
467			bus-width = <8>;
468			cap-mmc-highspeed;
469			cap-mmc-hw-reset;
470			non-removable;
471		};
472
473		sd: mmc@5a400000 {
474			compatible = "socionext,uniphier-sd-v3.1.1";
475			status = "disabled";
476			reg = <0x5a400000 0x800>;
477			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
478			pinctrl-names = "default", "uhs";
479			pinctrl-0 = <&pinctrl_sd>;
480			pinctrl-1 = <&pinctrl_sd_uhs>;
481			clocks = <&sd_clk 0>;
482			reset-names = "host";
483			resets = <&sd_rst 0>;
484			bus-width = <4>;
485			cap-sd-highspeed;
486			sd-uhs-sdr12;
487			sd-uhs-sdr25;
488			sd-uhs-sdr50;
489			socionext,syscon-uhs-mode = <&sdctrl 0>;
490		};
491
492		soc_glue: syscon@5f800000 {
493			compatible = "socionext,uniphier-pxs2-soc-glue",
494				     "simple-mfd", "syscon";
495			reg = <0x5f800000 0x2000>;
496
497			pinctrl: pinctrl {
498				compatible = "socionext,uniphier-pxs2-pinctrl";
499			};
500		};
501
502		syscon@5f900000 {
503			compatible = "socionext,uniphier-pxs2-soc-glue-debug",
504				     "simple-mfd", "syscon";
505			reg = <0x5f900000 0x2000>;
506			#address-cells = <1>;
507			#size-cells = <1>;
508			ranges = <0 0x5f900000 0x2000>;
509
510			efuse@100 {
511				compatible = "socionext,uniphier-efuse";
512				reg = <0x100 0x28>;
513			};
514
515			efuse@200 {
516				compatible = "socionext,uniphier-efuse";
517				reg = <0x200 0x58>;
518			};
519		};
520
521		xdmac: dma-controller@5fc10000 {
522			compatible = "socionext,uniphier-xdmac";
523			reg = <0x5fc10000 0x5300>;
524			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
525			dma-channels = <16>;
526			#dma-cells = <2>;
527		};
528
529		aidet: interrupt-controller@5fc20000 {
530			compatible = "socionext,uniphier-pxs2-aidet";
531			reg = <0x5fc20000 0x200>;
532			interrupt-controller;
533			#interrupt-cells = <2>;
534		};
535
536		timer@60000200 {
537			compatible = "arm,cortex-a9-global-timer";
538			reg = <0x60000200 0x20>;
539			interrupts = <GIC_PPI 11
540				(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>;
541			clocks = <&arm_timer_clk>;
542		};
543
544		timer@60000600 {
545			compatible = "arm,cortex-a9-twd-timer";
546			reg = <0x60000600 0x20>;
547			interrupts = <GIC_PPI 13
548				(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>;
549			clocks = <&arm_timer_clk>;
550		};
551
552		intc: interrupt-controller@60001000 {
553			compatible = "arm,cortex-a9-gic";
554			reg = <0x60001000 0x1000>,
555			      <0x60000100 0x100>;
556			#interrupt-cells = <3>;
557			interrupt-controller;
558		};
559
560		syscon@61840000 {
561			compatible = "socionext,uniphier-pxs2-sysctrl",
562				     "simple-mfd", "syscon";
563			reg = <0x61840000 0x10000>;
564
565			sys_clk: clock-controller {
566				compatible = "socionext,uniphier-pxs2-clock";
567				#clock-cells = <1>;
568			};
569
570			sys_rst: reset-controller {
571				compatible = "socionext,uniphier-pxs2-reset";
572				#reset-cells = <1>;
573			};
574
575			pvtctl: thermal-sensor {
576				compatible = "socionext,uniphier-pxs2-thermal";
577				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
578				#thermal-sensor-cells = <0>;
579				socionext,tmod-calibration = <0x0f86 0x6844>;
580			};
581		};
582
583		eth: ethernet@65000000 {
584			compatible = "socionext,uniphier-pxs2-ave4";
585			status = "disabled";
586			reg = <0x65000000 0x8500>;
587			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
588			pinctrl-names = "default";
589			pinctrl-0 = <&pinctrl_ether_rgmii>;
590			clock-names = "ether";
591			clocks = <&sys_clk 6>;
592			reset-names = "ether";
593			resets = <&sys_rst 6>;
594			phy-mode = "rgmii-id";
595			local-mac-address = [00 00 00 00 00 00];
596			socionext,syscon-phy-mode = <&soc_glue 0>;
597
598			mdio: mdio {
599				#address-cells = <1>;
600				#size-cells = <0>;
601			};
602		};
603
604		ahci: sata@65600000 {
605			compatible = "socionext,uniphier-pxs2-ahci",
606				     "generic-ahci";
607			status = "disabled";
608			reg = <0x65600000 0x10000>;
609			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
610			clocks = <&sys_clk 28>;
611			resets = <&sys_rst 28>, <&ahci_rst 0>;
612			ports-implemented = <1>;
613			phys = <&ahci_phy>;
614		};
615
616		sata-controller@65700000 {
617			compatible = "socionext,uniphier-pxs2-ahci-glue",
618				     "simple-mfd";
619			reg = <0x65700000 0x100>;
620			#address-cells = <1>;
621			#size-cells = <1>;
622			ranges = <0 0x65700000 0x100>;
623
624			ahci_rst: reset-controller@0 {
625				compatible = "socionext,uniphier-pxs2-ahci-reset";
626				reg = <0x0 0x4>;
627				clock-names = "link";
628				clocks = <&sys_clk 28>;
629				reset-names = "link";
630				resets = <&sys_rst 28>;
631				#reset-cells = <1>;
632			};
633
634			ahci_phy: phy@10 {
635				compatible = "socionext,uniphier-pxs2-ahci-phy";
636				reg = <0x10 0x10>;
637				clock-names = "link";
638				clocks = <&sys_clk 28>;
639				reset-names = "link", "phy";
640				resets = <&sys_rst 28>, <&sys_rst 30>;
641				#phy-cells = <0>;
642			};
643		};
644
645		usb0: usb@65a00000 {
646			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
647			status = "disabled";
648			reg = <0x65a00000 0xcd00>;
649			interrupt-names = "dwc_usb3";
650			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
651			pinctrl-names = "default";
652			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
653			clock-names = "ref", "bus_early", "suspend";
654			clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
655			resets = <&usb0_rst 15>;
656			phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
657			       <&usb0_ssphy0>, <&usb0_ssphy1>;
658			dr_mode = "host";
659		};
660
661		usb-controller@65b00000 {
662			compatible = "socionext,uniphier-pxs2-dwc3-glue",
663				     "simple-mfd";
664			reg = <0x65b00000 0x400>;
665			#address-cells = <1>;
666			#size-cells = <1>;
667			ranges = <0 0x65b00000 0x400>;
668
669			usb0_rst: reset-controller@0 {
670				compatible = "socionext,uniphier-pxs2-usb3-reset";
671				reg = <0x0 0x4>;
672				#reset-cells = <1>;
673				clock-names = "link";
674				clocks = <&sys_clk 14>;
675				reset-names = "link";
676				resets = <&sys_rst 14>;
677			};
678
679			usb0_vbus0: regulator@100 {
680				compatible = "socionext,uniphier-pxs2-usb3-regulator";
681				reg = <0x100 0x10>;
682				clock-names = "link";
683				clocks = <&sys_clk 14>;
684				reset-names = "link";
685				resets = <&sys_rst 14>;
686			};
687
688			usb0_vbus1: regulator@110 {
689				compatible = "socionext,uniphier-pxs2-usb3-regulator";
690				reg = <0x110 0x10>;
691				clock-names = "link";
692				clocks = <&sys_clk 14>;
693				reset-names = "link";
694				resets = <&sys_rst 14>;
695			};
696
697			usb0_hsphy0: phy@200 {
698				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
699				reg = <0x200 0x10>;
700				#phy-cells = <0>;
701				clock-names = "link", "phy";
702				clocks = <&sys_clk 14>, <&sys_clk 16>;
703				reset-names = "link", "phy";
704				resets = <&sys_rst 14>, <&sys_rst 16>;
705				vbus-supply = <&usb0_vbus0>;
706			};
707
708			usb0_hsphy1: phy@210 {
709				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
710				reg = <0x210 0x10>;
711				#phy-cells = <0>;
712				clock-names = "link", "phy";
713				clocks = <&sys_clk 14>, <&sys_clk 16>;
714				reset-names = "link", "phy";
715				resets = <&sys_rst 14>, <&sys_rst 16>;
716				vbus-supply = <&usb0_vbus1>;
717			};
718
719			usb0_ssphy0: phy@300 {
720				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
721				reg = <0x300 0x10>;
722				#phy-cells = <0>;
723				clock-names = "link", "phy";
724				clocks = <&sys_clk 14>, <&sys_clk 17>;
725				reset-names = "link", "phy";
726				resets = <&sys_rst 14>, <&sys_rst 17>;
727				vbus-supply = <&usb0_vbus0>;
728			};
729
730			usb0_ssphy1: phy@310 {
731				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
732				reg = <0x310 0x10>;
733				#phy-cells = <0>;
734				clock-names = "link", "phy";
735				clocks = <&sys_clk 14>, <&sys_clk 18>;
736				reset-names = "link", "phy";
737				resets = <&sys_rst 14>, <&sys_rst 18>;
738				vbus-supply = <&usb0_vbus1>;
739			};
740		};
741
742		usb1: usb@65c00000 {
743			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
744			status = "disabled";
745			reg = <0x65c00000 0xcd00>;
746			interrupt-names = "dwc_usb3";
747			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
748			pinctrl-names = "default";
749			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
750			clock-names = "ref", "bus_early", "suspend";
751			clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
752			resets = <&usb1_rst 15>;
753			phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
754			dr_mode = "host";
755		};
756
757		usb-controller@65d00000 {
758			compatible = "socionext,uniphier-pxs2-dwc3-glue",
759				     "simple-mfd";
760			reg = <0x65d00000 0x400>;
761			#address-cells = <1>;
762			#size-cells = <1>;
763			ranges = <0 0x65d00000 0x400>;
764
765			usb1_rst: reset-controller@0 {
766				compatible = "socionext,uniphier-pxs2-usb3-reset";
767				reg = <0x0 0x4>;
768				#reset-cells = <1>;
769				clock-names = "link";
770				clocks = <&sys_clk 15>;
771				reset-names = "link";
772				resets = <&sys_rst 15>;
773			};
774
775			usb1_vbus0: regulator@100 {
776				compatible = "socionext,uniphier-pxs2-usb3-regulator";
777				reg = <0x100 0x10>;
778				clock-names = "link";
779				clocks = <&sys_clk 15>;
780				reset-names = "link";
781				resets = <&sys_rst 15>;
782			};
783
784			usb1_vbus1: regulator@110 {
785				compatible = "socionext,uniphier-pxs2-usb3-regulator";
786				reg = <0x110 0x10>;
787				clock-names = "link";
788				clocks = <&sys_clk 15>;
789				reset-names = "link";
790				resets = <&sys_rst 15>;
791			};
792
793			usb1_hsphy0: phy@200 {
794				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
795				reg = <0x200 0x10>;
796				#phy-cells = <0>;
797				clock-names = "link", "phy";
798				clocks = <&sys_clk 15>, <&sys_clk 20>;
799				reset-names = "link", "phy";
800				resets = <&sys_rst 15>, <&sys_rst 20>;
801				vbus-supply = <&usb1_vbus0>;
802			};
803
804			usb1_hsphy1: phy@210 {
805				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
806				reg = <0x210 0x10>;
807				#phy-cells = <0>;
808				clock-names = "link", "phy";
809				clocks = <&sys_clk 15>, <&sys_clk 20>;
810				reset-names = "link", "phy";
811				resets = <&sys_rst 15>, <&sys_rst 20>;
812				vbus-supply = <&usb1_vbus1>;
813			};
814
815			usb1_ssphy0: phy@300 {
816				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
817				reg = <0x300 0x10>;
818				#phy-cells = <0>;
819				clock-names = "link", "phy";
820				clocks = <&sys_clk 15>, <&sys_clk 21>;
821				reset-names = "link", "phy";
822				resets = <&sys_rst 15>, <&sys_rst 21>;
823				vbus-supply = <&usb1_vbus0>;
824			};
825		};
826
827		nand: nand-controller@68000000 {
828			compatible = "socionext,uniphier-denali-nand-v5b";
829			status = "disabled";
830			reg-names = "nand_data", "denali_reg";
831			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
832			#address-cells = <1>;
833			#size-cells = <0>;
834			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
835			pinctrl-names = "default";
836			pinctrl-0 = <&pinctrl_nand>;
837			clock-names = "nand", "nand_x", "ecc";
838			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
839			reset-names = "nand", "reg";
840			resets = <&sys_rst 2>, <&sys_rst 2>;
841		};
842	};
843};
844
845#include "uniphier-pinctrl.dtsi"
846