1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Samsung's Exynos3250 based Rinato board device tree source 4 * 5 * Copyright (c) 2014 Samsung Electronics Co., Ltd. 6 * http://www.samsung.com 7 * 8 * Device tree source file for Samsung's Rinato board which is based on 9 * Samsung Exynos3250 SoC. 10 */ 11 12/dts-v1/; 13#include "exynos3250.dtsi" 14#include "exynos4412-ppmu-common.dtsi" 15#include <dt-bindings/input/input.h> 16#include <dt-bindings/gpio/gpio.h> 17#include <dt-bindings/clock/samsung,s2mps11.h> 18 19/ { 20 model = "Samsung Rinato board"; 21 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3"; 22 chassis-type = "watch"; 23 24 aliases { 25 i2c7 = &i2c_max77836; 26 mmc0 = &mshc_0; 27 mmc1 = &mshc_1; 28 }; 29 30 chosen { 31 stdout-path = &serial_1; 32 }; 33 34 memory@40000000 { 35 device_type = "memory"; 36 reg = <0x40000000 0x1ff00000>; 37 }; 38 39 firmware@205f000 { 40 compatible = "samsung,secure-firmware"; 41 reg = <0x0205f000 0x1000>; 42 }; 43 44 gpio-keys { 45 compatible = "gpio-keys"; 46 47 power-key { 48 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; 49 linux,code = <KEY_POWER>; 50 label = "power key"; 51 debounce-interval = <10>; 52 wakeup-source; 53 }; 54 }; 55 56 wlan_pwrseq: mshc1-pwrseq { 57 compatible = "mmc-pwrseq-simple"; 58 reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; 59 }; 60 61 i2c_max77836: i2c-gpio-0 { 62 compatible = "i2c-gpio"; 63 sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 64 scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 65 #address-cells = <1>; 66 #size-cells = <0>; 67 68 max77836: pmic@25 { 69 compatible = "maxim,max77836"; 70 interrupt-parent = <&gpx1>; 71 interrupts = <5 IRQ_TYPE_NONE>; 72 reg = <0x25>; 73 wakeup-source; 74 75 extcon { 76 compatible = "maxim,max77836-muic"; 77 }; 78 79 regulators { 80 compatible = "maxim,max77836-regulator"; 81 safeout_reg: SAFEOUT { 82 regulator-name = "SAFEOUT"; 83 }; 84 85 charger_reg: CHARGER { 86 regulator-name = "CHARGER"; 87 regulator-min-microamp = <45000>; 88 regulator-max-microamp = <475000>; 89 regulator-boot-on; 90 }; 91 92 motor_reg: LDO1 { 93 regulator-name = "MOT_2.7V"; 94 regulator-min-microvolt = <1100000>; 95 regulator-max-microvolt = <2700000>; 96 }; 97 98 LDO2 { 99 regulator-name = "UNUSED_LDO2"; 100 regulator-min-microvolt = <800000>; 101 regulator-max-microvolt = <3950000>; 102 }; 103 }; 104 105 charger { 106 compatible = "maxim,max77836-charger"; 107 108 maxim,constant-uvolt = <4350000>; 109 maxim,fast-charge-uamp = <225000>; 110 maxim,eoc-uamp = <7500>; 111 maxim,ovp-uvolt = <6500000>; 112 }; 113 }; 114 }; 115 116 haptics { 117 compatible = "regulator-haptic"; 118 haptic-supply = <&motor_reg>; 119 min-microvolt = <1100000>; 120 max-microvolt = <2700000>; 121 }; 122 123 thermal-zones { 124 cpu_thermal: cpu-thermal { 125 cooling-maps { 126 map0 { 127 /* Corresponds to 500MHz */ 128 cooling-device = <&cpu0 5 5>, 129 <&cpu1 5 5>; 130 }; 131 map1 { 132 /* Corresponds to 200MHz */ 133 cooling-device = <&cpu0 8 8>, 134 <&cpu1 8 8>; 135 }; 136 }; 137 }; 138 }; 139}; 140 141&adc { 142 vdd-supply = <&ldo3_reg>; 143 status = "okay"; 144 assigned-clocks = <&cmu CLK_SCLK_TSADC>; 145 assigned-clock-rates = <6000000>; 146 147 thermistor-ap { 148 compatible = "murata,ncp15wb473"; 149 pullup-uv = <1800000>; 150 pullup-ohm = <100000>; 151 pulldown-ohm = <100000>; 152 io-channels = <&adc 0>; 153 }; 154 155 thermistor-battery { 156 compatible = "murata,ncp15wb473"; 157 pullup-uv = <1800000>; 158 pullup-ohm = <100000>; 159 pulldown-ohm = <100000>; 160 io-channels = <&adc 1>; 161 }; 162}; 163 164&bus_dmc { 165 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; 166 vdd-supply = <&buck1_reg>; 167 status = "okay"; 168}; 169 170&bus_leftbus { 171 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; 172 vdd-supply = <&buck3_reg>; 173 status = "okay"; 174}; 175 176&bus_rightbus { 177 devfreq = <&bus_leftbus>; 178 status = "okay"; 179}; 180 181&bus_lcd0 { 182 devfreq = <&bus_leftbus>; 183 status = "okay"; 184}; 185 186&bus_fsys { 187 devfreq = <&bus_leftbus>; 188 status = "okay"; 189}; 190 191&bus_mcuisp { 192 devfreq = <&bus_leftbus>; 193 status = "okay"; 194}; 195 196&bus_isp { 197 devfreq = <&bus_leftbus>; 198 status = "okay"; 199}; 200 201&bus_peril { 202 devfreq = <&bus_leftbus>; 203 status = "okay"; 204}; 205 206&bus_mfc { 207 devfreq = <&bus_leftbus>; 208 status = "okay"; 209}; 210 211&cmu { 212 clocks = <&xusbxti>; 213}; 214 215&cpu0 { 216 cpu0-supply = <&buck2_reg>; 217}; 218 219&exynos_usbphy { 220 status = "okay"; 221 vbus-supply = <&safeout_reg>; 222}; 223 224&hsotg { 225 vusb_d-supply = <&ldo15_reg>; 226 vusb_a-supply = <&ldo12_reg>; 227 dr_mode = "peripheral"; 228 status = "okay"; 229}; 230 231&dsi_0 { 232 vddcore-supply = <&ldo6_reg>; 233 vddio-supply = <&ldo6_reg>; 234 samsung,burst-clock-frequency = <250000000>; 235 samsung,esc-clock-frequency = <20000000>; 236 samsung,pll-clock-frequency = <24000000>; 237 status = "okay"; 238 239 panel@0 { 240 compatible = "samsung,s6e63j0x03"; 241 reg = <0>; 242 vdd3-supply = <&ldo16_reg>; 243 vci-supply = <&ldo20_reg>; 244 reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; 245 te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; 246 }; 247}; 248 249&fimd { 250 status = "okay"; 251 252 i80-if-timings { 253 cs-setup = <0>; 254 wr-setup = <0>; 255 wr-active = <1>; 256 wr-hold = <0>; 257 }; 258}; 259 260&gpu { 261 mali-supply = <&buck3_reg>; 262 status = "okay"; 263}; 264 265&i2c_0 { 266 #address-cells = <1>; 267 #size-cells = <0>; 268 samsung,i2c-sda-delay = <100>; 269 samsung,i2c-slave-addr = <0x10>; 270 samsung,i2c-max-bus-freq = <100000>; 271 status = "okay"; 272 273 pmic@66 { 274 compatible = "samsung,s2mps14-pmic"; 275 interrupt-parent = <&gpx0>; 276 interrupts = <7 IRQ_TYPE_LEVEL_LOW>; 277 reg = <0x66>; 278 wakeup-source; 279 280 s2mps14_osc: clocks { 281 compatible = "samsung,s2mps14-clk"; 282 #clock-cells = <1>; 283 clock-output-names = "s2mps14_ap", "unused", 284 "s2mps14_bt"; 285 }; 286 287 regulators { 288 ldo1_reg: LDO1 { 289 regulator-name = "VAP_ALIVE_1.0V"; 290 regulator-min-microvolt = <1000000>; 291 regulator-max-microvolt = <1000000>; 292 regulator-always-on; 293 294 regulator-state-mem { 295 regulator-on-in-suspend; 296 }; 297 }; 298 299 ldo2_reg: LDO2 { 300 regulator-name = "VAP_M1_1.2V"; 301 regulator-min-microvolt = <1200000>; 302 regulator-max-microvolt = <1200000>; 303 regulator-always-on; 304 305 regulator-state-mem { 306 regulator-off-in-suspend; 307 }; 308 }; 309 310 ldo3_reg: LDO3 { 311 regulator-name = "VCC_AP_1.8V"; 312 regulator-min-microvolt = <1800000>; 313 regulator-max-microvolt = <1800000>; 314 regulator-always-on; 315 316 regulator-state-mem { 317 regulator-off-in-suspend; 318 }; 319 }; 320 321 ldo4_reg: LDO4 { 322 regulator-name = "VAP_AVDD_PLL1"; 323 regulator-min-microvolt = <1800000>; 324 regulator-max-microvolt = <1800000>; 325 regulator-always-on; 326 327 regulator-state-mem { 328 regulator-off-in-suspend; 329 }; 330 }; 331 332 ldo5_reg: LDO5 { 333 regulator-name = "VAP_PLL_ISO_1.0V"; 334 regulator-min-microvolt = <1000000>; 335 regulator-max-microvolt = <1000000>; 336 regulator-always-on; 337 338 regulator-state-mem { 339 regulator-off-in-suspend; 340 }; 341 }; 342 343 ldo6_reg: LDO6 { 344 regulator-name = "VAP_VMIPI_1.0V"; 345 regulator-min-microvolt = <1000000>; 346 regulator-max-microvolt = <1000000>; 347 regulator-always-on; 348 349 regulator-state-mem { 350 regulator-off-in-suspend; 351 }; 352 }; 353 354 ldo7_reg: LDO7 { 355 regulator-name = "VAP_AVDD_1.8V"; 356 regulator-min-microvolt = <1800000>; 357 regulator-max-microvolt = <1800000>; 358 regulator-always-on; 359 360 regulator-state-mem { 361 regulator-off-in-suspend; 362 }; 363 }; 364 365 ldo8_reg: LDO8 { 366 regulator-name = "VAP_USB_3.0V"; 367 regulator-min-microvolt = <3000000>; 368 regulator-max-microvolt = <3000000>; 369 regulator-always-on; 370 371 regulator-state-mem { 372 regulator-off-in-suspend; 373 }; 374 }; 375 376 ldo9_reg: LDO9 { 377 regulator-name = "V_LPDDR_1.2V"; 378 regulator-min-microvolt = <1200000>; 379 regulator-max-microvolt = <1200000>; 380 regulator-always-on; 381 382 regulator-state-mem { 383 regulator-on-in-suspend; 384 }; 385 }; 386 387 ldo10_reg: LDO10 { 388 regulator-name = "UNUSED_LDO10"; 389 regulator-min-microvolt = <1000000>; 390 regulator-max-microvolt = <1000000>; 391 392 regulator-state-mem { 393 regulator-off-in-suspend; 394 }; 395 }; 396 397 ldo11_reg: LDO11 { 398 regulator-name = "V_EMMC_1.8V"; 399 regulator-min-microvolt = <1800000>; 400 regulator-max-microvolt = <1800000>; 401 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; 402 }; 403 404 ldo12_reg: LDO12 { 405 regulator-name = "V_EMMC_2.8V"; 406 regulator-min-microvolt = <2800000>; 407 regulator-max-microvolt = <2800000>; 408 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; 409 }; 410 411 ldo13_reg: LDO13 { 412 regulator-name = "CAM_AVDD_2.8V"; 413 regulator-min-microvolt = <2800000>; 414 regulator-max-microvolt = <2800000>; 415 416 regulator-state-mem { 417 regulator-off-in-suspend; 418 }; 419 }; 420 421 ldo14_reg: LDO14 { 422 regulator-name = "UNUSED_LDO14"; 423 regulator-min-microvolt = <2700000>; 424 regulator-max-microvolt = <2700000>; 425 426 regulator-state-mem { 427 regulator-off-in-suspend; 428 }; 429 }; 430 431 ldo15_reg: LDO15 { 432 regulator-name = "TSP_AVDD_3.3V"; 433 regulator-min-microvolt = <3300000>; 434 regulator-max-microvolt = <3300000>; 435 436 regulator-state-mem { 437 regulator-off-in-suspend; 438 }; 439 }; 440 441 ldo16_reg: LDO16 { 442 regulator-name = "LCD_VDD_3.3V"; 443 regulator-min-microvolt = <3300000>; 444 regulator-max-microvolt = <3300000>; 445 446 regulator-state-mem { 447 regulator-off-in-suspend; 448 }; 449 }; 450 451 ldo17_reg: LDO17 { 452 regulator-name = "V_IRLED_3.3V"; 453 regulator-min-microvolt = <3300000>; 454 regulator-max-microvolt = <3300000>; 455 456 regulator-state-mem { 457 regulator-off-in-suspend; 458 }; 459 }; 460 461 ldo18_reg: LDO18 { 462 regulator-name = "CAM_AF_2.8V"; 463 regulator-min-microvolt = <2800000>; 464 regulator-max-microvolt = <2800000>; 465 466 regulator-state-mem { 467 regulator-off-in-suspend; 468 }; 469 }; 470 471 ldo19_reg: LDO19 { 472 regulator-name = "TSP_VDD_1.8V"; 473 regulator-min-microvolt = <1800000>; 474 regulator-max-microvolt = <1800000>; 475 476 regulator-state-mem { 477 regulator-off-in-suspend; 478 }; 479 }; 480 481 ldo20_reg: LDO20 { 482 regulator-name = "LCD_VDD_1.8V"; 483 regulator-min-microvolt = <1800000>; 484 regulator-max-microvolt = <1800000>; 485 486 regulator-state-mem { 487 regulator-off-in-suspend; 488 }; 489 }; 490 491 ldo21_reg: LDO21 { 492 regulator-name = "CAM_IO_1.8V"; 493 regulator-min-microvolt = <1800000>; 494 regulator-max-microvolt = <1800000>; 495 496 regulator-state-mem { 497 regulator-off-in-suspend; 498 }; 499 }; 500 501 ldo22_reg: LDO22 { 502 regulator-name = "CAM_DVDD_1.2V"; 503 regulator-min-microvolt = <1200000>; 504 regulator-max-microvolt = <1200000>; 505 506 regulator-state-mem { 507 regulator-off-in-suspend; 508 }; 509 }; 510 511 ldo23_reg: LDO23 { 512 regulator-name = "HRM_VCC_1.8V"; 513 regulator-min-microvolt = <1800000>; 514 regulator-max-microvolt = <1800000>; 515 regulator-always-on; 516 }; 517 518 ldo24_reg: LDO24 { 519 regulator-name = "HRM_VCC_3.3V"; 520 regulator-min-microvolt = <3000000>; 521 regulator-max-microvolt = <3000000>; 522 523 regulator-state-mem { 524 regulator-off-in-suspend; 525 }; 526 }; 527 528 ldo25_reg: LDO25 { 529 regulator-name = "UNUSED_LDO25"; 530 regulator-min-microvolt = <3000000>; 531 regulator-max-microvolt = <3000000>; 532 533 regulator-state-mem { 534 regulator-off-in-suspend; 535 }; 536 }; 537 538 buck1_reg: BUCK1 { 539 regulator-name = "VAP_MIF_1.0V"; 540 regulator-min-microvolt = <800000>; 541 regulator-max-microvolt = <900000>; 542 regulator-always-on; 543 544 regulator-state-mem { 545 regulator-off-in-suspend; 546 }; 547 }; 548 549 buck2_reg: BUCK2 { 550 regulator-name = "VAP_ARM_1.0V"; 551 regulator-min-microvolt = <850000>; 552 regulator-max-microvolt = <1150000>; 553 regulator-always-on; 554 555 regulator-state-mem { 556 regulator-off-in-suspend; 557 }; 558 }; 559 560 buck3_reg: BUCK3 { 561 regulator-name = "VAP_INT3D_1.0V"; 562 regulator-min-microvolt = <850000>; 563 regulator-max-microvolt = <1000000>; 564 regulator-always-on; 565 566 regulator-state-mem { 567 regulator-off-in-suspend; 568 }; 569 }; 570 571 buck4_reg: BUCK4 { 572 regulator-name = "VCC_SUB_1.95V"; 573 regulator-min-microvolt = <1950000>; 574 regulator-max-microvolt = <1950000>; 575 regulator-always-on; 576 577 regulator-state-mem { 578 regulator-on-in-suspend; 579 }; 580 }; 581 582 buck5_reg: BUCK5 { 583 regulator-name = "VCC_SUB_1.35V"; 584 regulator-min-microvolt = <1350000>; 585 regulator-max-microvolt = <1350000>; 586 regulator-always-on; 587 588 regulator-state-mem { 589 regulator-on-in-suspend; 590 }; 591 }; 592 }; 593 }; 594}; 595 596&i2c_1 { 597 #address-cells = <1>; 598 #size-cells = <0>; 599 samsung,i2c-sda-delay = <100>; 600 samsung,i2c-slave-addr = <0x10>; 601 samsung,i2c-max-bus-freq = <400000>; 602 status = "okay"; 603 604 fuelgauge@36 { 605 compatible = "maxim,max77836-battery"; 606 interrupt-parent = <&gpx1>; 607 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 608 reg = <0x36>; 609 }; 610}; 611 612&i2s2 { 613 status = "okay"; 614}; 615 616&jpeg { 617 status = "okay"; 618}; 619 620&mshc_0 { 621 broken-cd; 622 non-removable; 623 cap-mmc-highspeed; 624 mmc-hs200-1_8v; 625 card-detect-delay = <200>; 626 vmmc-supply = <&ldo12_reg>; 627 clock-frequency = <100000000>; 628 max-frequency = <100000000>; 629 mmc-ddr-1_8v; 630 samsung,dw-mshc-ciu-div = <1>; 631 samsung,dw-mshc-sdr-timing = <0 1>; 632 samsung,dw-mshc-ddr-timing = <1 2>; 633 pinctrl-names = "default"; 634 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; 635 bus-width = <8>; 636 status = "okay"; 637}; 638 639&mshc_1 { 640 status = "okay"; 641 642 #address-cells = <1>; 643 #size-cells = <0>; 644 645 non-removable; 646 cap-sd-highspeed; 647 cap-sdio-irq; 648 keep-power-in-suspend; 649 samsung,dw-mshc-ciu-div = <1>; 650 samsung,dw-mshc-sdr-timing = <0 1>; 651 samsung,dw-mshc-ddr-timing = <1 2>; 652 pinctrl-names = "default"; 653 pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>; 654 bus-width = <4>; 655 656 mmc-pwrseq = <&wlan_pwrseq>; 657 658 brcmf: wifi@1 { 659 compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; 660 reg = <1>; 661 662 interrupt-parent = <&gpx1>; 663 interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; 664 interrupt-names = "host-wake"; 665 }; 666}; 667 668&serial_0 { 669 assigned-clocks = <&cmu CLK_SCLK_UART0>; 670 assigned-clock-rates = <100000000>; 671 status = "okay"; 672 673 bluetooth { 674 compatible = "brcm,bcm4330-bt"; 675 max-speed = <3000000>; 676 shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>; 677 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; 678 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; 679 clocks = <&s2mps14_osc S2MPS11_CLK_BT>; 680 }; 681}; 682 683&serial_1 { 684 status = "okay"; 685}; 686 687&tmu { 688 vtmu-supply = <&ldo7_reg>; 689 status = "okay"; 690}; 691 692&rtc { 693 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; 694 clock-names = "rtc", "rtc_src"; 695 status = "okay"; 696}; 697 698&xusbxti { 699 clock-frequency = <24000000>; 700}; 701 702&pinctrl_0 { 703 pinctrl-names = "default"; 704 pinctrl-0 = <&initial0 &sleep0>; 705 706 initial0: initial-state { 707 PIN_IN(gpa1-4, DOWN, LV1); 708 PIN_IN(gpa1-5, DOWN, LV1); 709 710 PIN_IN(gpc0-0, DOWN, LV1); 711 PIN_IN(gpc0-1, DOWN, LV1); 712 PIN_IN(gpc0-2, DOWN, LV1); 713 PIN_IN(gpc0-3, DOWN, LV1); 714 PIN_IN(gpc0-4, DOWN, LV1); 715 716 PIN_IN(gpd0-0, DOWN, LV1); 717 PIN_IN(gpd0-1, DOWN, LV1); 718 }; 719 720 sleep0: sleep-state { 721 PIN_SLP(gpa0-0, INPUT, DOWN); 722 PIN_SLP(gpa0-1, INPUT, DOWN); 723 PIN_SLP(gpa0-2, INPUT, DOWN); 724 PIN_SLP(gpa0-3, INPUT, DOWN); 725 PIN_SLP(gpa0-4, INPUT, DOWN); 726 PIN_SLP(gpa0-5, INPUT, DOWN); 727 PIN_SLP(gpa0-6, INPUT, DOWN); 728 PIN_SLP(gpa0-7, INPUT, DOWN); 729 730 PIN_SLP(gpa1-0, INPUT, DOWN); 731 PIN_SLP(gpa1-1, INPUT, DOWN); 732 PIN_SLP(gpa1-2, INPUT, DOWN); 733 PIN_SLP(gpa1-3, INPUT, DOWN); 734 PIN_SLP(gpa1-4, INPUT, DOWN); 735 PIN_SLP(gpa1-5, INPUT, DOWN); 736 737 PIN_SLP(gpb-0, PREV, NONE); 738 PIN_SLP(gpb-1, PREV, NONE); 739 PIN_SLP(gpb-2, PREV, NONE); 740 PIN_SLP(gpb-3, PREV, NONE); 741 PIN_SLP(gpb-4, INPUT, DOWN); 742 PIN_SLP(gpb-5, INPUT, DOWN); 743 PIN_SLP(gpb-6, INPUT, DOWN); 744 PIN_SLP(gpb-7, INPUT, DOWN); 745 746 PIN_SLP(gpc0-0, INPUT, DOWN); 747 PIN_SLP(gpc0-1, INPUT, DOWN); 748 PIN_SLP(gpc0-2, INPUT, DOWN); 749 PIN_SLP(gpc0-3, INPUT, DOWN); 750 PIN_SLP(gpc0-4, INPUT, DOWN); 751 752 PIN_SLP(gpc1-0, INPUT, DOWN); 753 PIN_SLP(gpc1-1, INPUT, DOWN); 754 PIN_SLP(gpc1-2, INPUT, DOWN); 755 PIN_SLP(gpc1-3, INPUT, DOWN); 756 PIN_SLP(gpc1-4, INPUT, DOWN); 757 758 PIN_SLP(gpd0-0, INPUT, DOWN); 759 PIN_SLP(gpd0-1, INPUT, DOWN); 760 PIN_SLP(gpd0-2, INPUT, NONE); 761 PIN_SLP(gpd0-3, INPUT, NONE); 762 763 PIN_SLP(gpd1-0, INPUT, NONE); 764 PIN_SLP(gpd1-1, INPUT, NONE); 765 PIN_SLP(gpd1-2, INPUT, NONE); 766 PIN_SLP(gpd1-3, INPUT, NONE); 767 }; 768}; 769 770&pinctrl_1 { 771 pinctrl-names = "default"; 772 pinctrl-0 = <&initial1 &sleep1>; 773 774 initial1: initial-state { 775 PIN_IN(gpe0-6, DOWN, LV1); 776 PIN_IN(gpe0-7, DOWN, LV1); 777 778 PIN_IN(gpe1-0, DOWN, LV1); 779 PIN_IN(gpe1-3, DOWN, LV1); 780 PIN_IN(gpe1-4, DOWN, LV1); 781 PIN_IN(gpe1-5, DOWN, LV1); 782 PIN_IN(gpe1-6, DOWN, LV1); 783 784 PIN_IN(gpk2-0, DOWN, LV1); 785 PIN_IN(gpk2-1, DOWN, LV1); 786 PIN_IN(gpk2-2, DOWN, LV1); 787 PIN_IN(gpk2-3, DOWN, LV1); 788 PIN_IN(gpk2-4, DOWN, LV1); 789 PIN_IN(gpk2-5, DOWN, LV1); 790 PIN_IN(gpk2-6, DOWN, LV1); 791 792 PIN_IN(gpm0-0, DOWN, LV1); 793 PIN_IN(gpm0-1, DOWN, LV1); 794 PIN_IN(gpm0-2, DOWN, LV1); 795 PIN_IN(gpm0-3, DOWN, LV1); 796 PIN_IN(gpm0-4, DOWN, LV1); 797 PIN_IN(gpm0-5, DOWN, LV1); 798 PIN_IN(gpm0-6, DOWN, LV1); 799 PIN_IN(gpm0-7, DOWN, LV1); 800 801 PIN_IN(gpm1-0, DOWN, LV1); 802 PIN_IN(gpm1-1, DOWN, LV1); 803 PIN_IN(gpm1-2, DOWN, LV1); 804 PIN_IN(gpm1-3, DOWN, LV1); 805 PIN_IN(gpm1-4, DOWN, LV1); 806 PIN_IN(gpm1-5, DOWN, LV1); 807 PIN_IN(gpm1-6, DOWN, LV1); 808 809 PIN_IN(gpm2-0, DOWN, LV1); 810 PIN_IN(gpm2-1, DOWN, LV1); 811 812 PIN_IN(gpm3-0, DOWN, LV1); 813 PIN_IN(gpm3-1, DOWN, LV1); 814 PIN_IN(gpm3-2, DOWN, LV1); 815 PIN_IN(gpm3-3, DOWN, LV1); 816 PIN_IN(gpm3-4, DOWN, LV1); 817 818 PIN_IN(gpm4-1, DOWN, LV1); 819 PIN_IN(gpm4-2, DOWN, LV1); 820 PIN_IN(gpm4-3, DOWN, LV1); 821 PIN_IN(gpm4-4, DOWN, LV1); 822 PIN_IN(gpm4-5, DOWN, LV1); 823 PIN_IN(gpm4-6, DOWN, LV1); 824 PIN_IN(gpm4-7, DOWN, LV1); 825 }; 826 827 sleep1: sleep-state { 828 PIN_SLP(gpe0-0, PREV, NONE); 829 PIN_SLP(gpe0-1, PREV, NONE); 830 PIN_SLP(gpe0-2, INPUT, DOWN); 831 PIN_SLP(gpe0-3, INPUT, UP); 832 PIN_SLP(gpe0-4, INPUT, DOWN); 833 PIN_SLP(gpe0-5, INPUT, DOWN); 834 PIN_SLP(gpe0-6, INPUT, DOWN); 835 PIN_SLP(gpe0-7, INPUT, DOWN); 836 837 PIN_SLP(gpe1-0, INPUT, DOWN); 838 PIN_SLP(gpe1-1, PREV, NONE); 839 PIN_SLP(gpe1-2, INPUT, DOWN); 840 PIN_SLP(gpe1-3, INPUT, DOWN); 841 PIN_SLP(gpe1-4, INPUT, DOWN); 842 PIN_SLP(gpe1-5, INPUT, DOWN); 843 PIN_SLP(gpe1-6, INPUT, DOWN); 844 PIN_SLP(gpe1-7, INPUT, NONE); 845 846 PIN_SLP(gpe2-0, INPUT, NONE); 847 PIN_SLP(gpe2-1, INPUT, NONE); 848 PIN_SLP(gpe2-2, INPUT, NONE); 849 850 PIN_SLP(gpk0-0, INPUT, DOWN); 851 PIN_SLP(gpk0-1, INPUT, DOWN); 852 PIN_SLP(gpk0-2, OUT0, NONE); 853 PIN_SLP(gpk0-3, INPUT, DOWN); 854 PIN_SLP(gpk0-4, INPUT, DOWN); 855 PIN_SLP(gpk0-5, INPUT, DOWN); 856 PIN_SLP(gpk0-6, INPUT, DOWN); 857 PIN_SLP(gpk0-7, INPUT, DOWN); 858 859 PIN_SLP(gpk1-0, INPUT, DOWN); 860 PIN_SLP(gpk1-1, INPUT, DOWN); 861 PIN_SLP(gpk1-2, INPUT, DOWN); 862 PIN_SLP(gpk1-3, INPUT, DOWN); 863 PIN_SLP(gpk1-4, INPUT, DOWN); 864 PIN_SLP(gpk1-5, INPUT, DOWN); 865 PIN_SLP(gpk1-6, INPUT, DOWN); 866 867 PIN_SLP(gpk2-0, INPUT, DOWN); 868 PIN_SLP(gpk2-1, INPUT, DOWN); 869 PIN_SLP(gpk2-2, INPUT, DOWN); 870 PIN_SLP(gpk2-3, INPUT, DOWN); 871 PIN_SLP(gpk2-4, INPUT, DOWN); 872 PIN_SLP(gpk2-5, INPUT, DOWN); 873 PIN_SLP(gpk2-6, INPUT, DOWN); 874 875 PIN_SLP(gpl0-0, INPUT, DOWN); 876 PIN_SLP(gpl0-1, INPUT, DOWN); 877 PIN_SLP(gpl0-2, INPUT, DOWN); 878 PIN_SLP(gpl0-3, INPUT, DOWN); 879 880 PIN_SLP(gpm0-0, INPUT, DOWN); 881 PIN_SLP(gpm0-1, INPUT, DOWN); 882 PIN_SLP(gpm0-2, INPUT, DOWN); 883 PIN_SLP(gpm0-3, INPUT, DOWN); 884 PIN_SLP(gpm0-4, INPUT, DOWN); 885 PIN_SLP(gpm0-5, INPUT, DOWN); 886 PIN_SLP(gpm0-6, INPUT, DOWN); 887 PIN_SLP(gpm0-7, INPUT, DOWN); 888 889 PIN_SLP(gpm1-0, INPUT, DOWN); 890 PIN_SLP(gpm1-1, INPUT, DOWN); 891 PIN_SLP(gpm1-2, INPUT, DOWN); 892 PIN_SLP(gpm1-3, INPUT, DOWN); 893 PIN_SLP(gpm1-4, INPUT, DOWN); 894 PIN_SLP(gpm1-5, INPUT, DOWN); 895 PIN_SLP(gpm1-6, INPUT, DOWN); 896 897 PIN_SLP(gpm2-0, INPUT, DOWN); 898 PIN_SLP(gpm2-1, INPUT, DOWN); 899 PIN_SLP(gpm2-2, INPUT, DOWN); 900 PIN_SLP(gpm2-3, INPUT, DOWN); 901 PIN_SLP(gpm2-4, INPUT, DOWN); 902 903 PIN_SLP(gpm3-0, INPUT, DOWN); 904 PIN_SLP(gpm3-1, INPUT, DOWN); 905 PIN_SLP(gpm3-2, INPUT, DOWN); 906 PIN_SLP(gpm3-3, INPUT, DOWN); 907 PIN_SLP(gpm3-4, INPUT, DOWN); 908 PIN_SLP(gpm3-5, INPUT, DOWN); 909 PIN_SLP(gpm3-6, INPUT, DOWN); 910 PIN_SLP(gpm3-7, INPUT, DOWN); 911 912 PIN_SLP(gpm4-0, INPUT, DOWN); 913 PIN_SLP(gpm4-1, INPUT, DOWN); 914 PIN_SLP(gpm4-2, INPUT, DOWN); 915 PIN_SLP(gpm4-3, INPUT, DOWN); 916 PIN_SLP(gpm4-4, INPUT, DOWN); 917 PIN_SLP(gpm4-5, INPUT, DOWN); 918 PIN_SLP(gpm4-6, INPUT, DOWN); 919 PIN_SLP(gpm4-7, INPUT, DOWN); 920 }; 921}; 922