xref: /freebsd/sys/contrib/device-tree/src/arm/rockchip/rk3xxx.dtsi (revision a0ca4af9455b844c5e094fc1b09b1390ffa979fc)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2013 MundoReader S.L.
4 * Author: Heiko Stuebner <heiko@sntech.de>
5 */
6
7#include <dt-bindings/interrupt-controller/irq.h>
8#include <dt-bindings/interrupt-controller/arm-gic.h>
9#include <dt-bindings/soc/rockchip,boot-mode.h>
10
11/ {
12	#address-cells = <1>;
13	#size-cells = <1>;
14
15	interrupt-parent = <&gic>;
16
17	aliases {
18		ethernet0 = &emac;
19		gpio0 = &gpio0;
20		gpio1 = &gpio1;
21		gpio2 = &gpio2;
22		gpio3 = &gpio3;
23		i2c0 = &i2c0;
24		i2c1 = &i2c1;
25		i2c2 = &i2c2;
26		i2c3 = &i2c3;
27		i2c4 = &i2c4;
28		serial0 = &uart0;
29		serial1 = &uart1;
30		serial2 = &uart2;
31		serial3 = &uart3;
32		spi0 = &spi0;
33		spi1 = &spi1;
34	};
35
36	xin24m: oscillator {
37		compatible = "fixed-clock";
38		clock-frequency = <24000000>;
39		#clock-cells = <0>;
40		clock-output-names = "xin24m";
41	};
42
43	gpu: gpu@10090000 {
44		compatible = "arm,mali-400";
45		reg = <0x10090000 0x10000>;
46		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
47		clock-names = "bus", "core";
48		assigned-clocks = <&cru ACLK_GPU>;
49		assigned-clock-rates = <100000000>;
50		resets = <&cru SRST_GPU>;
51		status = "disabled";
52	};
53
54	vpu: video-codec@10104000 {
55		compatible = "rockchip,rk3066-vpu";
56		reg = <0x10104000 0x800>;
57		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
58			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
59		interrupt-names = "vepu", "vdpu";
60		clocks = <&cru ACLK_VDPU>, <&cru HCLK_VDPU>,
61			 <&cru ACLK_VEPU>, <&cru HCLK_VEPU>;
62		clock-names = "aclk_vdpu", "hclk_vdpu",
63			      "aclk_vepu", "hclk_vepu";
64	};
65
66	L2: cache-controller@10138000 {
67		compatible = "arm,pl310-cache";
68		reg = <0x10138000 0x1000>;
69		cache-unified;
70		cache-level = <2>;
71	};
72
73	scu@1013c000 {
74		compatible = "arm,cortex-a9-scu";
75		reg = <0x1013c000 0x100>;
76	};
77
78	global_timer: global-timer@1013c200 {
79		compatible = "arm,cortex-a9-global-timer";
80		reg = <0x1013c200 0x20>;
81		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
82		clocks = <&cru CORE_PERI>;
83		status = "disabled";
84		/* The clock source and the sched_clock provided by the arm_global_timer
85		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
86		 * depend on the CPU frequency.
87		 * Keep the arm_global_timer disabled in order to have the
88		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
89		 */
90	};
91
92	local_timer: local-timer@1013c600 {
93		compatible = "arm,cortex-a9-twd-timer";
94		reg = <0x1013c600 0x20>;
95		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
96		clocks = <&cru CORE_PERI>;
97	};
98
99	gic: interrupt-controller@1013d000 {
100		compatible = "arm,cortex-a9-gic";
101		interrupt-controller;
102		#interrupt-cells = <3>;
103		reg = <0x1013d000 0x1000>,
104		      <0x1013c100 0x0100>;
105	};
106
107	uart0: serial@10124000 {
108		compatible = "snps,dw-apb-uart";
109		reg = <0x10124000 0x400>;
110		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
111		reg-shift = <2>;
112		reg-io-width = <1>;
113		clock-names = "baudclk", "apb_pclk";
114		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
115		status = "disabled";
116	};
117
118	uart1: serial@10126000 {
119		compatible = "snps,dw-apb-uart";
120		reg = <0x10126000 0x400>;
121		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
122		reg-shift = <2>;
123		reg-io-width = <1>;
124		clock-names = "baudclk", "apb_pclk";
125		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
126		status = "disabled";
127	};
128
129	qos_gpu: qos@1012d000 {
130		compatible = "rockchip,rk3066-qos", "syscon";
131		reg = <0x1012d000 0x20>;
132	};
133
134	qos_vpu: qos@1012e000 {
135		compatible = "rockchip,rk3066-qos", "syscon";
136		reg = <0x1012e000 0x20>;
137	};
138
139	qos_lcdc0: qos@1012f000 {
140		compatible = "rockchip,rk3066-qos", "syscon";
141		reg = <0x1012f000 0x20>;
142	};
143
144	qos_cif0: qos@1012f080 {
145		compatible = "rockchip,rk3066-qos", "syscon";
146		reg = <0x1012f080 0x20>;
147	};
148
149	qos_ipp: qos@1012f100 {
150		compatible = "rockchip,rk3066-qos", "syscon";
151		reg = <0x1012f100 0x20>;
152	};
153
154	qos_lcdc1: qos@1012f180 {
155		compatible = "rockchip,rk3066-qos", "syscon";
156		reg = <0x1012f180 0x20>;
157	};
158
159	qos_cif1: qos@1012f200 {
160		compatible = "rockchip,rk3066-qos", "syscon";
161		reg = <0x1012f200 0x20>;
162	};
163
164	qos_rga: qos@1012f280 {
165		compatible = "rockchip,rk3066-qos", "syscon";
166		reg = <0x1012f280 0x20>;
167	};
168
169	usb_otg: usb@10180000 {
170		compatible = "rockchip,rk3066-usb", "snps,dwc2";
171		reg = <0x10180000 0x40000>;
172		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
173		clocks = <&cru HCLK_OTG0>;
174		clock-names = "otg";
175		dr_mode = "otg";
176		g-np-tx-fifo-size = <16>;
177		g-rx-fifo-size = <275>;
178		g-tx-fifo-size = <256 128 128 64 64 32>;
179		phys = <&usbphy0>;
180		phy-names = "usb2-phy";
181		status = "disabled";
182	};
183
184	usb_host: usb@101c0000 {
185		compatible = "snps,dwc2";
186		reg = <0x101c0000 0x40000>;
187		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
188		clocks = <&cru HCLK_OTG1>;
189		clock-names = "otg";
190		dr_mode = "host";
191		phys = <&usbphy1>;
192		phy-names = "usb2-phy";
193		status = "disabled";
194	};
195
196	emac: ethernet@10204000 {
197		compatible = "snps,arc-emac";
198		reg = <0x10204000 0x3c>;
199		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
200
201		rockchip,grf = <&grf>;
202
203		clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
204		clock-names = "hclk", "macref";
205		max-speed = <100>;
206		phy-mode = "rmii";
207
208		status = "disabled";
209	};
210
211	mmc0: mmc@10214000 {
212		compatible = "rockchip,rk2928-dw-mshc";
213		reg = <0x10214000 0x1000>;
214		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
215		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
216		clock-names = "biu", "ciu";
217		dmas = <&dmac2 1>;
218		dma-names = "rx-tx";
219		fifo-depth = <256>;
220		resets = <&cru SRST_SDMMC>;
221		reset-names = "reset";
222		status = "disabled";
223	};
224
225	mmc1: mmc@10218000 {
226		compatible = "rockchip,rk2928-dw-mshc";
227		reg = <0x10218000 0x1000>;
228		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
229		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
230		clock-names = "biu", "ciu";
231		dmas = <&dmac2 3>;
232		dma-names = "rx-tx";
233		fifo-depth = <256>;
234		resets = <&cru SRST_SDIO>;
235		reset-names = "reset";
236		status = "disabled";
237	};
238
239	emmc: mmc@1021c000 {
240		compatible = "rockchip,rk2928-dw-mshc";
241		reg = <0x1021c000 0x1000>;
242		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
243		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
244		clock-names = "biu", "ciu";
245		dmas = <&dmac2 4>;
246		dma-names = "rx-tx";
247		fifo-depth = <256>;
248		resets = <&cru SRST_EMMC>;
249		reset-names = "reset";
250		status = "disabled";
251	};
252
253	nfc: nand-controller@10500000 {
254		compatible = "rockchip,rk2928-nfc";
255		reg = <0x10500000 0x4000>;
256		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
257		clocks = <&cru HCLK_NANDC0>;
258		clock-names = "ahb";
259		status = "disabled";
260	};
261
262	pmu: pmu@20004000 {
263		compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
264		reg = <0x20004000 0x100>;
265
266		reboot-mode {
267			compatible = "syscon-reboot-mode";
268			offset = <0x40>;
269			mode-normal = <BOOT_NORMAL>;
270			mode-recovery = <BOOT_RECOVERY>;
271			mode-bootloader = <BOOT_FASTBOOT>;
272			mode-loader = <BOOT_BL_DOWNLOAD>;
273		};
274	};
275
276	grf: grf@20008000 {
277		compatible = "syscon", "simple-mfd";
278		reg = <0x20008000 0x200>;
279	};
280
281	dmac1_s: dma-controller@20018000 {
282		compatible = "arm,pl330", "arm,primecell";
283		reg = <0x20018000 0x4000>;
284		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
285			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
286		#dma-cells = <1>;
287		arm,pl330-broken-no-flushp;
288		arm,pl330-periph-burst;
289		clocks = <&cru ACLK_DMA1>;
290		clock-names = "apb_pclk";
291	};
292
293	dmac1_ns: dma-controller@2001c000 {
294		compatible = "arm,pl330", "arm,primecell";
295		reg = <0x2001c000 0x4000>;
296		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
297			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
298		#dma-cells = <1>;
299		arm,pl330-broken-no-flushp;
300		arm,pl330-periph-burst;
301		clocks = <&cru ACLK_DMA1>;
302		clock-names = "apb_pclk";
303		status = "disabled";
304	};
305
306	i2c0: i2c@2002d000 {
307		compatible = "rockchip,rk3066-i2c";
308		reg = <0x2002d000 0x1000>;
309		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
310		#address-cells = <1>;
311		#size-cells = <0>;
312
313		rockchip,grf = <&grf>;
314
315		clock-names = "i2c";
316		clocks = <&cru PCLK_I2C0>;
317
318		status = "disabled";
319	};
320
321	i2c1: i2c@2002f000 {
322		compatible = "rockchip,rk3066-i2c";
323		reg = <0x2002f000 0x1000>;
324		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
325		#address-cells = <1>;
326		#size-cells = <0>;
327
328		rockchip,grf = <&grf>;
329
330		clocks = <&cru PCLK_I2C1>;
331		clock-names = "i2c";
332
333		status = "disabled";
334	};
335
336	pwm0: pwm@20030000 {
337		compatible = "rockchip,rk2928-pwm";
338		reg = <0x20030000 0x10>;
339		#pwm-cells = <2>;
340		clocks = <&cru PCLK_PWM01>;
341		status = "disabled";
342	};
343
344	pwm1: pwm@20030010 {
345		compatible = "rockchip,rk2928-pwm";
346		reg = <0x20030010 0x10>;
347		#pwm-cells = <2>;
348		clocks = <&cru PCLK_PWM01>;
349		status = "disabled";
350	};
351
352	wdt: watchdog@2004c000 {
353		compatible = "snps,dw-wdt";
354		reg = <0x2004c000 0x100>;
355		clocks = <&cru PCLK_WDT>;
356		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
357		status = "disabled";
358	};
359
360	pwm2: pwm@20050020 {
361		compatible = "rockchip,rk2928-pwm";
362		reg = <0x20050020 0x10>;
363		#pwm-cells = <2>;
364		clocks = <&cru PCLK_PWM23>;
365		status = "disabled";
366	};
367
368	pwm3: pwm@20050030 {
369		compatible = "rockchip,rk2928-pwm";
370		reg = <0x20050030 0x10>;
371		#pwm-cells = <2>;
372		clocks = <&cru PCLK_PWM23>;
373		status = "disabled";
374	};
375
376	i2c2: i2c@20056000 {
377		compatible = "rockchip,rk3066-i2c";
378		reg = <0x20056000 0x1000>;
379		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
380		#address-cells = <1>;
381		#size-cells = <0>;
382
383		rockchip,grf = <&grf>;
384
385		clocks = <&cru PCLK_I2C2>;
386		clock-names = "i2c";
387
388		status = "disabled";
389	};
390
391	i2c3: i2c@2005a000 {
392		compatible = "rockchip,rk3066-i2c";
393		reg = <0x2005a000 0x1000>;
394		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
395		#address-cells = <1>;
396		#size-cells = <0>;
397
398		rockchip,grf = <&grf>;
399
400		clocks = <&cru PCLK_I2C3>;
401		clock-names = "i2c";
402
403		status = "disabled";
404	};
405
406	i2c4: i2c@2005e000 {
407		compatible = "rockchip,rk3066-i2c";
408		reg = <0x2005e000 0x1000>;
409		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
410		#address-cells = <1>;
411		#size-cells = <0>;
412
413		rockchip,grf = <&grf>;
414
415		clocks = <&cru PCLK_I2C4>;
416		clock-names = "i2c";
417
418		status = "disabled";
419	};
420
421	uart2: serial@20064000 {
422		compatible = "snps,dw-apb-uart";
423		reg = <0x20064000 0x400>;
424		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
425		reg-shift = <2>;
426		reg-io-width = <1>;
427		clock-names = "baudclk", "apb_pclk";
428		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
429		status = "disabled";
430	};
431
432	uart3: serial@20068000 {
433		compatible = "snps,dw-apb-uart";
434		reg = <0x20068000 0x400>;
435		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
436		reg-shift = <2>;
437		reg-io-width = <1>;
438		clock-names = "baudclk", "apb_pclk";
439		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
440		status = "disabled";
441	};
442
443	saradc: saradc@2006c000 {
444		compatible = "rockchip,saradc";
445		reg = <0x2006c000 0x100>;
446		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
447		#io-channel-cells = <1>;
448		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
449		clock-names = "saradc", "apb_pclk";
450		resets = <&cru SRST_SARADC>;
451		reset-names = "saradc-apb";
452		status = "disabled";
453	};
454
455	spi0: spi@20070000 {
456		compatible = "rockchip,rk3066-spi";
457		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
458		clock-names = "spiclk", "apb_pclk";
459		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
460		reg = <0x20070000 0x1000>;
461		#address-cells = <1>;
462		#size-cells = <0>;
463		dmas = <&dmac2 10>, <&dmac2 11>;
464		dma-names = "tx", "rx";
465		status = "disabled";
466	};
467
468	spi1: spi@20074000 {
469		compatible = "rockchip,rk3066-spi";
470		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
471		clock-names = "spiclk", "apb_pclk";
472		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
473		reg = <0x20074000 0x1000>;
474		#address-cells = <1>;
475		#size-cells = <0>;
476		dmas = <&dmac2 12>, <&dmac2 13>;
477		dma-names = "tx", "rx";
478		status = "disabled";
479	};
480
481	dmac2: dma-controller@20078000 {
482		compatible = "arm,pl330", "arm,primecell";
483		reg = <0x20078000 0x4000>;
484		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
485			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
486		#dma-cells = <1>;
487		arm,pl330-broken-no-flushp;
488		arm,pl330-periph-burst;
489		clocks = <&cru ACLK_DMA2>;
490		clock-names = "apb_pclk";
491	};
492};
493