xref: /freebsd/sys/contrib/device-tree/src/arm/qcom/qcom-sdx65-mtp.dts (revision 7fdf597e96a02165cfe22ff357b857d5fa15ed8a)
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
4 */
5/dts-v1/;
6
7/* PM7250B is configured to use SID2/3 */
8#define PM7250B_SID 2
9#define PM7250B_SID1 3
10
11#include "qcom-sdx65.dtsi"
12#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
13#include <arm64/qcom/pmk8350.dtsi>
14#include <arm64/qcom/pm7250b.dtsi>
15#include "pmx65.dtsi"
16
17/ {
18	model = "Qualcomm Technologies, Inc. SDX65 MTP";
19	compatible = "qcom,sdx65-mtp", "qcom,sdx65";
20	qcom,board-id = <0x2010008 0x302>;
21
22	aliases {
23		serial0 = &blsp1_uart3;
24	};
25
26	chosen {
27		stdout-path = "serial0:115200n8";
28	};
29
30	reserved-memory {
31		#address-cells = <1>;
32		#size-cells = <1>;
33		ranges;
34
35		mpss_dsm: memory@8c400000 {
36			no-map;
37			reg = <0x8c400000 0x3200000>;
38		};
39
40		ipa_fw_mem: memory@8fced000 {
41			no-map;
42			reg = <0x8fced000 0x10000>;
43		};
44
45		mpss_adsp_mem: memory@90800000 {
46			no-map;
47			reg = <0x90800000 0x10000000>;
48		};
49	};
50
51	vph_pwr: vph-pwr-regulator {
52		compatible = "regulator-fixed";
53		regulator-name = "vph_pwr";
54		regulator-min-microvolt = <3700000>;
55		regulator-max-microvolt = <3700000>;
56	};
57
58	vreg_bob_3p3: pmx65_bob {
59		compatible = "regulator-fixed";
60		regulator-name = "vreg_bob_3p3";
61		regulator-min-microvolt = <3300000>;
62		regulator-max-microvolt = <3300000>;
63
64		regulator-always-on;
65		regulator-boot-on;
66
67		vin-supply = <&vph_pwr>;
68	};
69};
70
71&apps_rsc {
72	regulators-0 {
73		compatible = "qcom,pmx65-rpmh-regulators";
74		qcom,pmic-id = "b";
75
76		vdd-s1-supply = <&vph_pwr>;
77		vdd-s2-supply = <&vph_pwr>;
78		vdd-s3-supply = <&vph_pwr>;
79		vdd-s4-supply = <&vph_pwr>;
80		vdd-s5-supply = <&vph_pwr>;
81		vdd-s6-supply = <&vph_pwr>;
82		vdd-s7-supply = <&vph_pwr>;
83		vdd-s8-supply = <&vph_pwr>;
84		vdd-l1-supply = <&vreg_s2b_1p224>;
85		vdd-l2-l18-supply = <&vreg_s2b_1p224>;
86		vdd-l3-supply = <&vreg_s8b_0p824>;
87		vdd-l4-supply = <&vreg_s7b_0p936>;
88		vdd-l5-l6-l16-supply = <&vreg_s4b_1p824>;
89		vdd-l7-supply = <&vreg_s3b_0p776>;
90		vdd-l8-l9-supply = <&vreg_s8b_0p824>;
91		vdd-l10-supply = <&vreg_bob_3p3>;
92		vdd-l11-l13-supply = <&vreg_bob_3p3>;
93		vdd-l12-supply = <&vreg_s2b_1p224>;
94		vdd-l14-supply = <&vreg_s3b_0p776>;
95		vdd-l15-supply = <&vreg_s2b_1p224>;
96		vdd-l17-supply = <&vreg_s8b_0p824>;
97		vdd-l19-supply = <&vreg_s3b_0p776>;
98		vdd-l20-supply = <&vreg_s7b_0p936>;
99		vdd-l21-supply = <&vreg_s7b_0p936>;
100
101		vreg_s2b_1p224: smps2 {
102			regulator-min-microvolt = <1200000>;
103			regulator-max-microvolt = <1400000>;
104		};
105
106		vreg_s3b_0p776: smps3 {
107			regulator-min-microvolt = <500000>;
108			regulator-max-microvolt = <1040000>;
109		};
110
111		vreg_s4b_1p824: smps4 {
112			regulator-min-microvolt = <1800000>;
113			regulator-max-microvolt = <2024000>;
114		};
115
116		vreg_s7b_0p936: smps7 {
117			regulator-min-microvolt = <500000>;
118			regulator-max-microvolt = <1040000>;
119		};
120
121		vreg_s8b_0p824: smps8 {
122			regulator-min-microvolt = <304000>;
123			regulator-max-microvolt = <1300000>;
124		};
125
126		vreg_l1b_1p2: ldo1 {
127			regulator-min-microvolt = <1200000>;
128			regulator-max-microvolt = <1200000>;
129			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
130		};
131
132		ldo2 {
133			regulator-min-microvolt = <1128000>;
134			regulator-max-microvolt = <1128000>;
135			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
136		};
137
138		ldo3 {
139			regulator-min-microvolt = <300000>;
140			regulator-max-microvolt = <960000>;
141			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
142		};
143
144		vreg_l4b_0p88: ldo4 {
145			regulator-min-microvolt = <880000>;
146			regulator-max-microvolt = <912000>;
147			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
148		};
149
150		vreg_l5b_1p8: ldo5 {
151			regulator-min-microvolt = <1800000>;
152			regulator-max-microvolt = <1800000>;
153			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
154		};
155
156		ldo6 {
157			regulator-min-microvolt = <1800000>;
158			regulator-max-microvolt = <1800000>;
159			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
160		};
161
162		ldo7 {
163			regulator-min-microvolt = <752000>;
164			regulator-max-microvolt = <752000>;
165			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
166		};
167
168		ldo8 {
169			regulator-min-microvolt = <800000>;
170			regulator-max-microvolt = <800000>;
171			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
172		};
173
174		ldo9 {
175			regulator-min-microvolt = <800000>;
176			regulator-max-microvolt = <800000>;
177			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
178		};
179
180		vreg_l10b_3p08: ldo10 {
181			regulator-min-microvolt = <3088000>;
182			regulator-max-microvolt = <3088000>;
183			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
184		};
185
186		ldo11 {
187			regulator-min-microvolt = <1704000>;
188			regulator-max-microvolt = <2928000>;
189			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
190		};
191
192		ldo12 {
193			regulator-min-microvolt = <1200000>;
194			regulator-max-microvolt = <1200000>;
195			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
196		};
197
198		ldo13 {
199			regulator-min-microvolt = <1704000>;
200			regulator-max-microvolt = <2928000>;
201			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
202		};
203
204		ldo14 {
205			regulator-min-microvolt = <600000>;
206			regulator-max-microvolt = <800000>;
207			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
208		};
209
210		ldo15 {
211			regulator-min-microvolt = <1200000>;
212			regulator-max-microvolt = <1200000>;
213			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
214		};
215
216		ldo16 {
217			regulator-min-microvolt = <1776000>;
218			regulator-max-microvolt = <1776000>;
219			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
220		};
221
222		ldo17 {
223			regulator-min-microvolt = <300000>;
224			regulator-max-microvolt = <960000>;
225			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
226		};
227
228		ldo19 {
229			regulator-min-microvolt = <752000>;
230			regulator-max-microvolt = <752000>;
231			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
232		};
233
234		ldo20 {
235			regulator-min-microvolt = <912000>;
236			regulator-max-microvolt = <912000>;
237			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
238		};
239
240		ldo21 {
241			regulator-min-microvolt = <912000>;
242			regulator-max-microvolt = <912000>;
243			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
244		};
245	};
246};
247
248&blsp1_uart3 {
249	status = "okay";
250};
251
252&ipa {
253	qcom,gsi-loader = "skip";
254	status = "okay";
255};
256
257&pcie_ep {
258	pinctrl-0 = <&pcie_ep_clkreq_default
259		     &pcie_ep_perst_default
260		     &pcie_ep_wake_default>;
261	pinctrl-names = "default";
262
263	reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
264	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
265
266	status = "okay";
267};
268
269&pcie_phy {
270	vdda-phy-supply = <&vreg_l1b_1p2>;
271	vdda-pll-supply = <&vreg_l4b_0p88>;
272
273	status = "okay";
274};
275
276&qpic_bam {
277	status = "okay";
278};
279
280&qpic_nand {
281	status = "okay";
282
283	nand@0 {
284		reg = <0>;
285
286		nand-ecc-strength = <4>;
287		nand-ecc-step-size = <512>;
288		nand-bus-width = <8>;
289		/* ico and efs2 partitions are secured */
290		secure-regions = /bits/ 64 <0x500000 0x500000
291					    0xa00000 0xb00000>;
292	};
293};
294
295&remoteproc_mpss {
296	memory-region = <&mpss_adsp_mem>;
297	status = "okay";
298};
299
300&tlmm {
301	pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
302		pins = "gpio56";
303		function = "pcie_clkreq";
304		drive-strength = <2>;
305		bias-disable;
306	};
307
308	pcie_ep_perst_default: pcie-ep-perst-default-state {
309		pins = "gpio57";
310		function = "gpio";
311		drive-strength = <2>;
312		bias-pull-down;
313	};
314
315	pcie_ep_wake_default: pcie-ep-wake-default-state {
316		pins = "gpio53";
317		function = "gpio";
318		drive-strength = <2>;
319		bias-disable;
320	};
321};
322
323&usb {
324	status = "okay";
325};
326
327&usb_dwc3 {
328	dr_mode = "peripheral";
329};
330
331&usb_hsphy {
332	vdda-pll-supply = <&vreg_l4b_0p88>;
333	vdda33-supply = <&vreg_l10b_3p08>;
334	vdda18-supply = <&vreg_l5b_1p8>;
335	status = "okay";
336};
337
338&usb_qmpphy {
339	vdda-phy-supply = <&vreg_l4b_0p88>;
340	vdda-pll-supply = <&vreg_l1b_1p2>;
341	status = "okay";
342};
343