xref: /freebsd/sys/contrib/device-tree/src/arm/qcom/qcom-pma8084.dtsi (revision a90b9d0159070121c221b966469c3e36d912bf82)
1// SPDX-License-Identifier: GPL-2.0
2#include <dt-bindings/iio/qcom,spmi-vadc.h>
3#include <dt-bindings/interrupt-controller/irq.h>
4#include <dt-bindings/spmi/spmi.h>
5
6&spmi_bus {
7
8	pma8084_0: pma8084@0 {
9		compatible = "qcom,pma8084", "qcom,spmi-pmic";
10		reg = <0x0 SPMI_USID>;
11		#address-cells = <1>;
12		#size-cells = <0>;
13
14		rtc@6000 {
15			compatible = "qcom,pm8941-rtc";
16			reg = <0x6000>,
17			      <0x6100>;
18			reg-names = "rtc", "alarm";
19			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
20		};
21
22		pwrkey@800 {
23			compatible = "qcom,pm8941-pwrkey";
24			reg = <0x800>;
25			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
26			debounce = <15625>;
27			bias-pull-up;
28		};
29
30		pma8084_gpios: gpio@c000 {
31			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
32			reg = <0xc000>;
33			gpio-controller;
34			gpio-ranges = <&pma8084_gpios 0 0 22>;
35			#gpio-cells = <2>;
36			interrupt-controller;
37			#interrupt-cells = <2>;
38		};
39
40		pma8084_mpps: mpps@a000 {
41			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
42			reg = <0xa000>;
43			gpio-controller;
44			#gpio-cells = <2>;
45			gpio-ranges = <&pma8084_mpps 0 0 8>;
46			interrupt-controller;
47			#interrupt-cells = <2>;
48		};
49
50		pma8084_temp: temp-alarm@2400 {
51			compatible = "qcom,spmi-temp-alarm";
52			reg = <0x2400>;
53			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
54			#thermal-sensor-cells = <0>;
55			io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
56			io-channel-names = "thermal";
57		};
58
59		pma8084_vadc: adc@3100 {
60			compatible = "qcom,spmi-vadc";
61			reg = <0x3100>;
62			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
63			#address-cells = <1>;
64			#size-cells = <0>;
65			#io-channel-cells = <1>;
66
67			channel@8 {
68				reg = <VADC_DIE_TEMP>;
69			};
70
71			channel@9 {
72				reg = <VADC_REF_625MV>;
73			};
74
75			channel@a {
76				reg = <VADC_REF_1250MV>;
77			};
78
79			channel@c {
80				reg = <VADC_SPARE1>;
81			};
82
83			channel@e {
84				reg = <VADC_GND_REF>;
85			};
86
87			channel@f {
88				reg = <VADC_VDD_VADC>;
89			};
90		};
91	};
92
93	pma8084_1: pma8084@1 {
94		compatible = "qcom,pma8084", "qcom,spmi-pmic";
95		reg = <0x1 SPMI_USID>;
96		#address-cells = <1>;
97		#size-cells = <0>;
98	};
99};
100