1// SPDX-License-Identifier: GPL-2.0 2#include "qcom-msm8974pro.dtsi" 3#include "qcom-pm8841.dtsi" 4#include "qcom-pm8941.dtsi" 5#include <dt-bindings/input/input.h> 6#include <dt-bindings/leds/common.h> 7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 8 9/ { 10 model = "Sony Xperia Z2 Tablet"; 11 compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974"; 12 chassis-type = "tablet"; 13 14 aliases { 15 serial0 = &blsp1_uart2; 16 serial1 = &blsp2_uart1; 17 }; 18 19 chosen { 20 stdout-path = "serial0:115200n8"; 21 }; 22 23 gpio-keys { 24 compatible = "gpio-keys"; 25 26 pinctrl-names = "default"; 27 pinctrl-0 = <&gpio_keys_pin_a>; 28 29 key-volume-down { 30 label = "volume_down"; 31 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; 32 linux,input-type = <1>; 33 linux,code = <KEY_VOLUMEDOWN>; 34 }; 35 36 key-camera-snapshot { 37 label = "camera_snapshot"; 38 gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; 39 linux,input-type = <1>; 40 linux,code = <KEY_CAMERA>; 41 }; 42 43 key-camera-focus { 44 label = "camera_focus"; 45 gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; 46 linux,input-type = <1>; 47 linux,code = <KEY_CAMERA_FOCUS>; 48 }; 49 50 key-volume-up { 51 label = "volume_up"; 52 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; 53 linux,input-type = <1>; 54 linux,code = <KEY_VOLUMEUP>; 55 }; 56 }; 57 58 vreg_bl_vddio: lcd-backlight-vddio { 59 compatible = "regulator-fixed"; 60 regulator-name = "vreg_bl_vddio"; 61 regulator-min-microvolt = <3150000>; 62 regulator-max-microvolt = <3150000>; 63 64 gpio = <&tlmm 69 0>; 65 enable-active-high; 66 67 vin-supply = <&pm8941_s3>; 68 startup-delay-us = <70000>; 69 70 pinctrl-names = "default"; 71 pinctrl-0 = <&lcd_backlight_en_pin_a>; 72 }; 73 74 vreg_vsp: lcd-dcdc-regulator { 75 compatible = "regulator-fixed"; 76 regulator-name = "vreg_vsp"; 77 regulator-min-microvolt = <5600000>; 78 regulator-max-microvolt = <5600000>; 79 80 gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; 81 enable-active-high; 82 83 pinctrl-names = "default"; 84 pinctrl-0 = <&lcd_dcdc_en_pin_a>; 85 }; 86 87 vreg_wlan: wlan-regulator { 88 compatible = "regulator-fixed"; 89 90 regulator-name = "wl-reg"; 91 regulator-min-microvolt = <3300000>; 92 regulator-max-microvolt = <3300000>; 93 94 gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; 95 enable-active-high; 96 97 pinctrl-names = "default"; 98 pinctrl-0 = <&wlan_regulator_pin>; 99 }; 100}; 101 102&blsp1_uart2 { 103 status = "okay"; 104}; 105 106&blsp2_i2c2 { 107 status = "okay"; 108 clock-frequency = <355000>; 109 110 synaptics@2c { 111 compatible = "syna,rmi4-i2c"; 112 reg = <0x2c>; 113 114 interrupt-parent = <&tlmm>; 115 interrupts = <86 IRQ_TYPE_EDGE_FALLING>; 116 117 #address-cells = <1>; 118 #size-cells = <0>; 119 120 vdd-supply = <&pm8941_l22>; 121 vio-supply = <&pm8941_lvs3>; 122 123 pinctrl-names = "default"; 124 pinctrl-0 = <&ts_int_pin>; 125 126 syna,startup-delay-ms = <100>; 127 128 rmi-f01@1 { 129 reg = <0x1>; 130 syna,nosleep = <1>; 131 }; 132 133 rmi-f11@11 { 134 reg = <0x11>; 135 syna,f11-flip-x = <1>; 136 syna,sensor-type = <1>; 137 }; 138 }; 139}; 140 141&blsp2_i2c5 { 142 status = "okay"; 143 clock-frequency = <355000>; 144 145 lp8566_wled: backlight@2c { 146 compatible = "ti,lp8556"; 147 reg = <0x2c>; 148 power-supply = <&vreg_bl_vddio>; 149 150 bl-name = "backlight"; 151 dev-ctrl = /bits/ 8 <0x05>; 152 init-brt = /bits/ 8 <0x3f>; 153 154 rom-a0h { 155 rom-addr = /bits/ 8 <0xa0>; 156 rom-val = /bits/ 8 <0xff>; 157 }; 158 rom-a1h { 159 rom-addr = /bits/ 8 <0xa1>; 160 rom-val = /bits/ 8 <0x3f>; 161 }; 162 rom-a2h { 163 rom-addr = /bits/ 8 <0xa2>; 164 rom-val = /bits/ 8 <0x20>; 165 }; 166 rom-a3h { 167 rom-addr = /bits/ 8 <0xa3>; 168 rom-val = /bits/ 8 <0x5e>; 169 }; 170 rom-a4h { 171 rom-addr = /bits/ 8 <0xa4>; 172 rom-val = /bits/ 8 <0x02>; 173 }; 174 rom-a5h { 175 rom-addr = /bits/ 8 <0xa5>; 176 rom-val = /bits/ 8 <0x04>; 177 }; 178 rom-a6h { 179 rom-addr = /bits/ 8 <0xa6>; 180 rom-val = /bits/ 8 <0x80>; 181 }; 182 rom-a7h { 183 rom-addr = /bits/ 8 <0xa7>; 184 rom-val = /bits/ 8 <0xf7>; 185 }; 186 rom-a9h { 187 rom-addr = /bits/ 8 <0xa9>; 188 rom-val = /bits/ 8 <0x80>; 189 }; 190 rom-aah { 191 rom-addr = /bits/ 8 <0xaa>; 192 rom-val = /bits/ 8 <0x0f>; 193 }; 194 rom-aeh { 195 rom-addr = /bits/ 8 <0xae>; 196 rom-val = /bits/ 8 <0x0f>; 197 }; 198 }; 199}; 200 201&blsp2_uart1 { 202 status = "okay"; 203 204 bluetooth { 205 compatible = "brcm,bcm43438-bt"; 206 max-speed = <3000000>; 207 208 pinctrl-names = "default"; 209 pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>; 210 211 host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; 212 device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; 213 shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; 214 }; 215}; 216 217&pm8941_coincell { 218 status = "okay"; 219 220 qcom,rset-ohms = <2100>; 221 qcom,vset-millivolts = <3000>; 222}; 223 224&pm8941_gpios { 225 gpio_keys_pin_a: gpio-keys-active-state { 226 pins = "gpio2", "gpio5"; 227 function = "normal"; 228 229 bias-pull-up; 230 power-source = <PM8941_GPIO_S3>; 231 }; 232 233 bt_reg_on_pin: bt-reg-on-state { 234 pins = "gpio16"; 235 function = "normal"; 236 237 output-low; 238 power-source = <PM8941_GPIO_S3>; 239 }; 240 241 wlan_sleep_clk_pin: wl-sleep-clk-state { 242 pins = "gpio17"; 243 function = "func2"; 244 245 output-high; 246 power-source = <PM8941_GPIO_S3>; 247 }; 248 249 wlan_regulator_pin: wl-reg-active-state { 250 pins = "gpio18"; 251 function = "normal"; 252 253 bias-disable; 254 power-source = <PM8941_GPIO_S3>; 255 }; 256 257 lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state { 258 pins = "gpio20"; 259 function = "normal"; 260 261 bias-disable; 262 power-source = <PM8941_GPIO_S3>; 263 input-disable; 264 output-low; 265 }; 266 267}; 268 269&pm8941_lpg { 270 status = "okay"; 271 272 qcom,power-source = <1>; 273 274 multi-led { 275 color = <LED_COLOR_ID_RGB>; 276 function = LED_FUNCTION_STATUS; 277 278 #address-cells = <1>; 279 #size-cells = <0>; 280 281 led@5 { 282 reg = <5>; 283 color = <LED_COLOR_ID_BLUE>; 284 }; 285 286 led@6 { 287 reg = <6>; 288 color = <LED_COLOR_ID_GREEN>; 289 }; 290 291 led@7 { 292 reg = <7>; 293 color = <LED_COLOR_ID_RED>; 294 }; 295 }; 296}; 297 298&remoteproc_adsp { 299 cx-supply = <&pm8841_s2>; 300}; 301 302&remoteproc_mss { 303 cx-supply = <&pm8841_s2>; 304 mss-supply = <&pm8841_s3>; 305 mx-supply = <&pm8841_s1>; 306 pll-supply = <&pm8941_l12>; 307}; 308 309&rpm_requests { 310 regulators-0 { 311 compatible = "qcom,rpm-pm8841-regulators"; 312 313 pm8841_s1: s1 { 314 regulator-min-microvolt = <675000>; 315 regulator-max-microvolt = <1050000>; 316 }; 317 318 pm8841_s2: s2 { 319 regulator-min-microvolt = <500000>; 320 regulator-max-microvolt = <1050000>; 321 }; 322 323 pm8841_s3: s3 { 324 regulator-min-microvolt = <500000>; 325 regulator-max-microvolt = <1050000>; 326 }; 327 328 pm8841_s4: s4 { 329 regulator-min-microvolt = <500000>; 330 regulator-max-microvolt = <1050000>; 331 }; 332 }; 333 334 regulators-1 { 335 compatible = "qcom,rpm-pm8941-regulators"; 336 337 vdd_l1_l3-supply = <&pm8941_s1>; 338 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; 339 vdd_l4_l11-supply = <&pm8941_s1>; 340 vdd_l5_l7-supply = <&pm8941_s2>; 341 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; 342 vdd_l9_l10_l17_l22-supply = <&vreg_boost>; 343 vdd_l13_l20_l23_l24-supply = <&vreg_boost>; 344 vdd_l21-supply = <&vreg_boost>; 345 346 pm8941_s1: s1 { 347 regulator-min-microvolt = <1300000>; 348 regulator-max-microvolt = <1300000>; 349 regulator-always-on; 350 regulator-boot-on; 351 }; 352 353 pm8941_s2: s2 { 354 regulator-min-microvolt = <2150000>; 355 regulator-max-microvolt = <2150000>; 356 regulator-boot-on; 357 }; 358 359 pm8941_s3: s3 { 360 regulator-min-microvolt = <1800000>; 361 regulator-max-microvolt = <1800000>; 362 regulator-system-load = <154000>; 363 regulator-always-on; 364 regulator-boot-on; 365 }; 366 367 pm8941_s4: s4 { 368 regulator-min-microvolt = <5000000>; 369 regulator-max-microvolt = <5000000>; 370 }; 371 372 pm8941_l1: l1 { 373 regulator-min-microvolt = <1225000>; 374 regulator-max-microvolt = <1225000>; 375 regulator-always-on; 376 regulator-boot-on; 377 }; 378 379 pm8941_l2: l2 { 380 regulator-min-microvolt = <1200000>; 381 regulator-max-microvolt = <1200000>; 382 }; 383 384 pm8941_l3: l3 { 385 regulator-min-microvolt = <1200000>; 386 regulator-max-microvolt = <1200000>; 387 }; 388 389 pm8941_l4: l4 { 390 regulator-min-microvolt = <1225000>; 391 regulator-max-microvolt = <1225000>; 392 }; 393 394 pm8941_l5: l5 { 395 regulator-min-microvolt = <1800000>; 396 regulator-max-microvolt = <1800000>; 397 }; 398 399 pm8941_l6: l6 { 400 regulator-min-microvolt = <1800000>; 401 regulator-max-microvolt = <1800000>; 402 regulator-boot-on; 403 }; 404 405 pm8941_l7: l7 { 406 regulator-min-microvolt = <1800000>; 407 regulator-max-microvolt = <1800000>; 408 regulator-boot-on; 409 }; 410 411 pm8941_l8: l8 { 412 regulator-min-microvolt = <1800000>; 413 regulator-max-microvolt = <1800000>; 414 }; 415 416 pm8941_l9: l9 { 417 regulator-min-microvolt = <1800000>; 418 regulator-max-microvolt = <2950000>; 419 }; 420 421 pm8941_l11: l11 { 422 regulator-min-microvolt = <1300000>; 423 regulator-max-microvolt = <1350000>; 424 }; 425 426 pm8941_l12: l12 { 427 regulator-min-microvolt = <1800000>; 428 regulator-max-microvolt = <1800000>; 429 regulator-always-on; 430 regulator-boot-on; 431 }; 432 433 pm8941_l13: l13 { 434 regulator-min-microvolt = <1800000>; 435 regulator-max-microvolt = <2950000>; 436 regulator-boot-on; 437 }; 438 439 pm8941_l14: l14 { 440 regulator-min-microvolt = <1800000>; 441 regulator-max-microvolt = <1800000>; 442 }; 443 444 pm8941_l15: l15 { 445 regulator-min-microvolt = <2050000>; 446 regulator-max-microvolt = <2050000>; 447 }; 448 449 pm8941_l16: l16 { 450 regulator-min-microvolt = <2700000>; 451 regulator-max-microvolt = <2700000>; 452 }; 453 454 pm8941_l17: l17 { 455 regulator-min-microvolt = <2700000>; 456 regulator-max-microvolt = <2700000>; 457 }; 458 459 pm8941_l18: l18 { 460 regulator-min-microvolt = <2850000>; 461 regulator-max-microvolt = <2850000>; 462 }; 463 464 pm8941_l19: l19 { 465 regulator-min-microvolt = <2850000>; 466 regulator-max-microvolt = <2850000>; 467 }; 468 469 pm8941_l20: l20 { 470 regulator-min-microvolt = <2950000>; 471 regulator-max-microvolt = <2950000>; 472 regulator-system-load = <500000>; 473 regulator-allow-set-load; 474 regulator-boot-on; 475 }; 476 477 pm8941_l21: l21 { 478 regulator-min-microvolt = <2950000>; 479 regulator-max-microvolt = <2950000>; 480 regulator-boot-on; 481 }; 482 483 pm8941_l22: l22 { 484 regulator-min-microvolt = <3000000>; 485 regulator-max-microvolt = <3000000>; 486 }; 487 488 pm8941_l23: l23 { 489 regulator-min-microvolt = <2800000>; 490 regulator-max-microvolt = <2800000>; 491 }; 492 493 pm8941_l24: l24 { 494 regulator-min-microvolt = <3075000>; 495 regulator-max-microvolt = <3075000>; 496 regulator-boot-on; 497 }; 498 499 pm8941_lvs3: lvs3 {}; 500 }; 501}; 502 503&sdhc_1 { 504 status = "okay"; 505 506 vmmc-supply = <&pm8941_l20>; 507 vqmmc-supply = <&pm8941_s3>; 508 509 pinctrl-names = "default", "sleep"; 510 pinctrl-0 = <&sdc1_on>; 511 pinctrl-1 = <&sdc1_off>; 512}; 513 514&sdhc_2 { 515 status = "okay"; 516 517 vmmc-supply = <&pm8941_l21>; 518 vqmmc-supply = <&pm8941_l13>; 519 520 cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; 521 522 pinctrl-names = "default", "sleep"; 523 pinctrl-0 = <&sdc2_on>; 524 pinctrl-1 = <&sdc2_off>; 525}; 526 527&sdhc_3 { 528 status = "okay"; 529 530 max-frequency = <100000000>; 531 vmmc-supply = <&vreg_wlan>; 532 non-removable; 533 534 pinctrl-names = "default"; 535 pinctrl-0 = <&sdc3_on>; 536 537 #address-cells = <1>; 538 #size-cells = <0>; 539 540 bcrmf@1 { 541 compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; 542 reg = <1>; 543 544 brcm,drive-strength = <10>; 545 546 pinctrl-names = "default"; 547 pinctrl-0 = <&wlan_sleep_clk_pin>; 548 }; 549}; 550 551&smbb { 552 qcom,fast-charge-safe-current = <1500000>; 553 qcom,fast-charge-current-limit = <1500000>; 554 qcom,dc-current-limit = <1800000>; 555 usb-charge-current-limit = <1800000>; 556 qcom,fast-charge-safe-voltage = <4400000>; 557 qcom,fast-charge-high-threshold-voltage = <4350000>; 558 qcom,fast-charge-low-threshold-voltage = <3400000>; 559 qcom,auto-recharge-threshold-voltage = <4200000>; 560 qcom,minimum-input-voltage = <4300000>; 561}; 562 563&tlmm { 564 lcd_backlight_en_pin_a: lcd-backlight-vddio-state { 565 pins = "gpio69"; 566 function = "gpio"; 567 drive-strength = <10>; 568 output-low; 569 bias-disable; 570 }; 571 572 sdc1_on: sdc1-on-state { 573 clk-pins { 574 pins = "sdc1_clk"; 575 drive-strength = <16>; 576 bias-disable; 577 }; 578 579 cmd-data-pins { 580 pins = "sdc1_cmd", "sdc1_data"; 581 drive-strength = <10>; 582 bias-pull-up; 583 }; 584 }; 585 586 sdc2_on: sdc2-on-state { 587 clk-pins { 588 pins = "sdc2_clk"; 589 drive-strength = <6>; 590 bias-disable; 591 }; 592 593 cmd-data-pins { 594 pins = "sdc2_cmd", "sdc2_data"; 595 drive-strength = <6>; 596 bias-pull-up; 597 }; 598 599 cd-pins { 600 pins = "gpio62"; 601 function = "gpio"; 602 drive-strength = <2>; 603 bias-disable; 604 }; 605 }; 606 607 sdc3_on: sdc3-on-state { 608 clk-pins { 609 pins = "gpio40"; 610 function = "sdc3"; 611 drive-strength = <10>; 612 bias-disable; 613 }; 614 615 cmd-pins { 616 pins = "gpio39"; 617 function = "sdc3"; 618 drive-strength = <10>; 619 bias-pull-up; 620 }; 621 622 data-pins { 623 pins = "gpio35", "gpio36", "gpio37", "gpio38"; 624 function = "sdc3"; 625 drive-strength = <10>; 626 bias-pull-up; 627 }; 628 }; 629 630 ts_int_pin: ts-int-pin-state { 631 pins = "gpio86"; 632 function = "gpio"; 633 drive-strength = <2>; 634 bias-disable; 635 }; 636 637 bt_host_wake_pin: bt-host-wake-state { 638 pins = "gpio95"; 639 function = "gpio"; 640 drive-strength = <2>; 641 bias-disable; 642 output-low; 643 }; 644 645 bt_dev_wake_pin: bt-dev-wake-state { 646 pins = "gpio96"; 647 function = "gpio"; 648 drive-strength = <2>; 649 bias-disable; 650 }; 651}; 652 653&usb { 654 status = "okay"; 655 656 phys = <&usb_hs1_phy>; 657 phy-select = <&tcsr 0xb000 0>; 658 extcon = <&smbb>, <&usb_id>; 659 vbus-supply = <&chg_otg>; 660 661 hnp-disable; 662 srp-disable; 663 adp-disable; 664}; 665 666&usb_hs1_phy { 667 status = "okay"; 668 669 v1p8-supply = <&pm8941_l6>; 670 v3p3-supply = <&pm8941_l24>; 671 672 extcon = <&smbb>; 673 qcom,init-seq = /bits/ 8 <0x1 0x64>; 674}; 675