1// SPDX-License-Identifier: GPL-2.0 2#include "qcom-msm8974pro.dtsi" 3#include "qcom-pm8841.dtsi" 4#include "qcom-pm8941.dtsi" 5#include <dt-bindings/input/input.h> 6#include <dt-bindings/leds/common.h> 7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 8 9/ { 10 model = "Fairphone 2"; 11 compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974"; 12 chassis-type = "handset"; 13 14 aliases { 15 mmc0 = &sdhc_1; 16 mmc1 = &sdhc_2; 17 serial0 = &blsp1_uart2; 18 }; 19 20 chosen { 21 stdout-path = "serial0:115200n8"; 22 }; 23 24 gpio-keys { 25 compatible = "gpio-keys"; 26 27 pinctrl-names = "default"; 28 pinctrl-0 = <&gpio_keys_pin_a>; 29 30 key-camera-snapshot { 31 label = "camera_snapshot"; 32 gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; 33 linux,code = <KEY_CAMERA>; 34 wakeup-source; 35 debounce-interval = <15>; 36 }; 37 38 key-volume-down { 39 label = "volume_down"; 40 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; 41 linux,code = <KEY_VOLUMEDOWN>; 42 wakeup-source; 43 debounce-interval = <15>; 44 }; 45 46 key-volume-up { 47 label = "volume_up"; 48 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; 49 linux,code = <KEY_VOLUMEUP>; 50 wakeup-source; 51 debounce-interval = <15>; 52 }; 53 }; 54 55 vibrator { 56 compatible = "gpio-vibrator"; 57 enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; 58 vcc-supply = <&pm8941_l18>; 59 }; 60}; 61 62&blsp1_i2c2 { 63 status = "okay"; 64 65 touchscreen@41 { 66 compatible = "ilitek,ili2120"; 67 reg = <0x41>; 68 interrupt-parent = <&tlmm>; 69 interrupts = <28 IRQ_TYPE_EDGE_FALLING>; 70 reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; 71 72 touchscreen-size-x = <1080>; 73 touchscreen-size-y = <1920>; 74 }; 75}; 76 77&blsp1_uart2 { 78 status = "okay"; 79}; 80 81&imem { 82 reboot-mode { 83 mode-normal = <0x77665501>; 84 mode-bootloader = <0x77665500>; 85 mode-recovery = <0x77665502>; 86 }; 87}; 88 89&pm8941_gpios { 90 gpio_keys_pin_a: gpio-keys-active-state { 91 pins = "gpio1", "gpio2", "gpio5"; 92 function = "normal"; 93 94 bias-pull-up; 95 power-source = <PM8941_GPIO_S3>; 96 }; 97}; 98 99&pm8941_lpg { 100 status = "okay"; 101 102 qcom,power-source = <1>; 103 104 multi-led { 105 color = <LED_COLOR_ID_RGB>; 106 function = LED_FUNCTION_STATUS; 107 108 #address-cells = <1>; 109 #size-cells = <0>; 110 111 led@7 { 112 reg = <7>; 113 color = <LED_COLOR_ID_RED>; 114 }; 115 116 led@6 { 117 reg = <6>; 118 color = <LED_COLOR_ID_GREEN>; 119 }; 120 121 led@5 { 122 reg = <5>; 123 color = <LED_COLOR_ID_BLUE>; 124 }; 125 }; 126}; 127 128&pronto { 129 status = "okay"; 130 131 vddmx-supply = <&pm8841_s1>; 132 vddcx-supply = <&pm8841_s2>; 133 vddpx-supply = <&pm8941_s3>; 134 135 pinctrl-names = "default"; 136 pinctrl-0 = <&wcnss_pin_a>; 137 138 iris { 139 vddxo-supply = <&pm8941_l6>; 140 vddrfa-supply = <&pm8941_l11>; 141 vddpa-supply = <&pm8941_l19>; 142 vdddig-supply = <&pm8941_s3>; 143 }; 144 145 smd-edge { 146 qcom,remote-pid = <4>; 147 label = "pronto"; 148 149 wcnss { 150 status = "okay"; 151 }; 152 }; 153}; 154 155&remoteproc_adsp { 156 status = "okay"; 157 cx-supply = <&pm8841_s2>; 158}; 159 160&remoteproc_mss { 161 status = "okay"; 162 cx-supply = <&pm8841_s2>; 163 mss-supply = <&pm8841_s3>; 164 mx-supply = <&pm8841_s1>; 165 pll-supply = <&pm8941_l12>; 166}; 167 168&rpm_requests { 169 regulators-0 { 170 compatible = "qcom,rpm-pm8841-regulators"; 171 172 pm8841_s1: s1 { 173 regulator-min-microvolt = <675000>; 174 regulator-max-microvolt = <1050000>; 175 }; 176 177 pm8841_s2: s2 { 178 regulator-min-microvolt = <500000>; 179 regulator-max-microvolt = <1050000>; 180 }; 181 182 pm8841_s3: s3 { 183 regulator-min-microvolt = <1050000>; 184 regulator-max-microvolt = <1050000>; 185 }; 186 }; 187 188 regulators-1 { 189 compatible = "qcom,rpm-pm8941-regulators"; 190 191 vdd_l1_l3-supply = <&pm8941_s1>; 192 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; 193 vdd_l4_l11-supply = <&pm8941_s1>; 194 vdd_l5_l7-supply = <&pm8941_s2>; 195 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; 196 vdd_l9_l10_l17_l22-supply = <&vreg_boost>; 197 vdd_l13_l20_l23_l24-supply = <&vreg_boost>; 198 vdd_l21-supply = <&vreg_boost>; 199 200 pm8941_s1: s1 { 201 regulator-min-microvolt = <1300000>; 202 regulator-max-microvolt = <1300000>; 203 regulator-always-on; 204 regulator-boot-on; 205 }; 206 207 pm8941_s2: s2 { 208 regulator-min-microvolt = <2150000>; 209 regulator-max-microvolt = <2150000>; 210 regulator-boot-on; 211 }; 212 213 pm8941_s3: s3 { 214 regulator-min-microvolt = <1800000>; 215 regulator-max-microvolt = <1800000>; 216 regulator-always-on; 217 regulator-boot-on; 218 }; 219 220 pm8941_l1: l1 { 221 regulator-min-microvolt = <1225000>; 222 regulator-max-microvolt = <1225000>; 223 regulator-always-on; 224 regulator-boot-on; 225 }; 226 227 pm8941_l2: l2 { 228 regulator-min-microvolt = <1200000>; 229 regulator-max-microvolt = <1200000>; 230 }; 231 232 pm8941_l3: l3 { 233 regulator-min-microvolt = <1225000>; 234 regulator-max-microvolt = <1225000>; 235 }; 236 237 pm8941_l4: l4 { 238 regulator-min-microvolt = <1225000>; 239 regulator-max-microvolt = <1225000>; 240 }; 241 242 pm8941_l5: l5 { 243 regulator-min-microvolt = <1800000>; 244 regulator-max-microvolt = <1800000>; 245 }; 246 247 pm8941_l6: l6 { 248 regulator-min-microvolt = <1800000>; 249 regulator-max-microvolt = <1800000>; 250 regulator-boot-on; 251 }; 252 253 pm8941_l7: l7 { 254 regulator-min-microvolt = <1800000>; 255 regulator-max-microvolt = <1800000>; 256 regulator-boot-on; 257 }; 258 259 pm8941_l8: l8 { 260 regulator-min-microvolt = <1800000>; 261 regulator-max-microvolt = <1800000>; 262 }; 263 264 pm8941_l9: l9 { 265 regulator-min-microvolt = <1800000>; 266 regulator-max-microvolt = <2950000>; 267 }; 268 269 pm8941_l10: l10 { 270 regulator-min-microvolt = <1800000>; 271 regulator-max-microvolt = <2950000>; 272 }; 273 274 pm8941_l11: l11 { 275 regulator-min-microvolt = <1225000>; 276 regulator-max-microvolt = <1350000>; 277 }; 278 279 pm8941_l12: l12 { 280 regulator-min-microvolt = <1800000>; 281 regulator-max-microvolt = <1800000>; 282 regulator-always-on; 283 regulator-boot-on; 284 }; 285 286 pm8941_l13: l13 { 287 regulator-min-microvolt = <1800000>; 288 regulator-max-microvolt = <2950000>; 289 regulator-boot-on; 290 }; 291 292 pm8941_l14: l14 { 293 regulator-min-microvolt = <1800000>; 294 regulator-max-microvolt = <1800000>; 295 }; 296 297 pm8941_l15: l15 { 298 regulator-min-microvolt = <2050000>; 299 regulator-max-microvolt = <2050000>; 300 }; 301 302 pm8941_l16: l16 { 303 regulator-min-microvolt = <2700000>; 304 regulator-max-microvolt = <2700000>; 305 }; 306 307 pm8941_l17: l17 { 308 regulator-min-microvolt = <2850000>; 309 regulator-max-microvolt = <2850000>; 310 }; 311 312 pm8941_l18: l18 { 313 regulator-min-microvolt = <2850000>; 314 regulator-max-microvolt = <2850000>; 315 }; 316 317 pm8941_l19: l19 { 318 regulator-min-microvolt = <2900000>; 319 regulator-max-microvolt = <3350000>; 320 }; 321 322 pm8941_l20: l20 { 323 regulator-min-microvolt = <2950000>; 324 regulator-max-microvolt = <2950000>; 325 regulator-system-load = <200000>; 326 regulator-allow-set-load; 327 regulator-boot-on; 328 }; 329 330 pm8941_l21: l21 { 331 regulator-min-microvolt = <2950000>; 332 regulator-max-microvolt = <2950000>; 333 regulator-boot-on; 334 }; 335 336 pm8941_l22: l22 { 337 regulator-min-microvolt = <3000000>; 338 regulator-max-microvolt = <3300000>; 339 }; 340 341 pm8941_l23: l23 { 342 regulator-min-microvolt = <3000000>; 343 regulator-max-microvolt = <3000000>; 344 }; 345 346 pm8941_l24: l24 { 347 regulator-min-microvolt = <3075000>; 348 regulator-max-microvolt = <3075000>; 349 regulator-boot-on; 350 }; 351 }; 352}; 353 354&sdhc_1 { 355 status = "okay"; 356 357 vmmc-supply = <&pm8941_l20>; 358 vqmmc-supply = <&pm8941_s3>; 359 360 pinctrl-names = "default", "sleep"; 361 pinctrl-0 = <&sdc1_on>; 362 pinctrl-1 = <&sdc1_off>; 363}; 364 365&sdhc_2 { 366 status = "okay"; 367 368 vmmc-supply = <&pm8941_l21>; 369 vqmmc-supply = <&pm8941_l13>; 370 371 pinctrl-names = "default", "sleep"; 372 pinctrl-0 = <&sdc2_on>; 373 pinctrl-1 = <&sdc2_off>; 374}; 375 376&smbb { 377 usb-charge-current-limit = <1500000>; 378 qcom,fast-charge-safe-current = <1500000>; 379 qcom,fast-charge-current-limit = <1500000>; 380 qcom,fast-charge-safe-voltage = <4380000>; 381 qcom,fast-charge-high-threshold-voltage = <4350000>; 382 qcom,auto-recharge-threshold-voltage = <4240000>; 383 qcom,minimum-input-voltage = <4450000>; 384}; 385 386&tlmm { 387 sdc1_on: sdc1-on-state { 388 clk-pins { 389 pins = "sdc1_clk"; 390 drive-strength = <16>; 391 bias-disable; 392 }; 393 394 cmd-data-pins { 395 pins = "sdc1_cmd", "sdc1_data"; 396 drive-strength = <10>; 397 bias-pull-up; 398 }; 399 }; 400 401 sdc2_on: sdc2-on-state { 402 clk-pins { 403 pins = "sdc2_clk"; 404 drive-strength = <10>; 405 bias-disable; 406 }; 407 408 cmd-data-pins { 409 pins = "sdc2_cmd", "sdc2_data"; 410 drive-strength = <6>; 411 bias-pull-up; 412 }; 413 }; 414 415 wcnss_pin_a: wcnss-pin-active-state { 416 wlan-pins { 417 pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; 418 function = "wlan"; 419 420 drive-strength = <6>; 421 bias-pull-down; 422 }; 423 424 bt-pins { 425 pins = "gpio35", "gpio43", "gpio44"; 426 function = "bt"; 427 428 drive-strength = <2>; 429 bias-pull-down; 430 }; 431 432 fm-pins { 433 pins = "gpio41", "gpio42"; 434 function = "fm"; 435 436 drive-strength = <2>; 437 bias-pull-down; 438 }; 439 }; 440}; 441 442&usb { 443 status = "okay"; 444 445 phys = <&usb_hs1_phy>; 446 phy-select = <&tcsr 0xb000 0>; 447 extcon = <&smbb>, <&usb_id>; 448 vbus-supply = <&chg_otg>; 449 450 hnp-disable; 451 srp-disable; 452 adp-disable; 453}; 454 455&usb_hs1_phy { 456 status = "okay"; 457 458 v1p8-supply = <&pm8941_l6>; 459 v3p3-supply = <&pm8941_l24>; 460 461 extcon = <&smbb>; 462 qcom,init-seq = /bits/ 8 <0x1 0x64>; 463}; 464