1// SPDX-License-Identifier: GPL-2.0 2#include <dt-bindings/input/input.h> 3 4#include "qcom-msm8960.dtsi" 5 6/ { 7 model = "Qualcomm MSM8960 CDP"; 8 compatible = "qcom,msm8960-cdp", "qcom,msm8960"; 9 10 aliases { 11 serial0 = &gsbi5_serial; 12 }; 13 14 chosen { 15 stdout-path = "serial0:115200n8"; 16 }; 17 18 ext_l2: gpio-regulator { 19 compatible = "regulator-fixed"; 20 regulator-name = "ext_l2"; 21 gpio = <&msmgpio 91 0>; 22 startup-delay-us = <10000>; 23 enable-active-high; 24 }; 25}; 26 27&gsbi1 { 28 qcom,mode = <GSBI_PROT_SPI>; 29 pinctrl-names = "default"; 30 pinctrl-0 = <&spi1_default>; 31 status = "okay"; 32}; 33 34&gsbi1_spi { 35 status = "okay"; 36 37 ethernet@0 { 38 compatible = "micrel,ks8851"; 39 reg = <0>; 40 interrupt-parent = <&msmgpio>; 41 interrupts = <90 IRQ_TYPE_LEVEL_LOW>; 42 spi-max-frequency = <5400000>; 43 vdd-supply = <&ext_l2>; 44 vdd-io-supply = <&pm8921_lvs6>; 45 reset-gpios = <&msmgpio 89 0>; 46 }; 47}; 48 49&gsbi5 { 50 qcom,mode = <GSBI_PROT_I2C_UART>; 51 status = "okay"; 52}; 53 54&gsbi5_serial { 55 status = "okay"; 56}; 57 58&msmgpio { 59 spi1_default: spi1-default-state { 60 mosi-pins { 61 pins = "gpio6"; 62 function = "gsbi1"; 63 drive-strength = <12>; 64 bias-disable; 65 }; 66 67 miso-pins { 68 pins = "gpio7"; 69 function = "gsbi1"; 70 drive-strength = <12>; 71 bias-disable; 72 }; 73 74 cs-pins { 75 pins = "gpio8"; 76 function = "gsbi1"; 77 drive-strength = <12>; 78 bias-disable; 79 output-low; 80 }; 81 82 clk-pins { 83 pins = "gpio9"; 84 function = "gsbi1"; 85 drive-strength = <12>; 86 bias-disable; 87 }; 88 }; 89}; 90 91&pmicintc { 92 keypad@148 { 93 linux,keymap = < 94 MATRIX_KEY(0, 0, KEY_VOLUMEUP) 95 MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) 96 MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) 97 MATRIX_KEY(0, 3, KEY_CAMERA) 98 >; 99 keypad,num-rows = <1>; 100 keypad,num-columns = <5>; 101 }; 102}; 103 104&rpm { 105 regulators { 106 compatible = "qcom,rpm-pm8921-regulators"; 107 vin_lvs1_3_6-supply = <&pm8921_s4>; 108 vin_lvs2-supply = <&pm8921_s4>; 109 vin_lvs4_5_7-supply = <&pm8921_s4>; 110 vdd_ncp-supply = <&pm8921_l6>; 111 vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; 112 vdd_l21_l23_l29-supply = <&pm8921_s8>; 113 vdd_l24-supply = <&pm8921_s1>; 114 vdd_l25-supply = <&pm8921_s1>; 115 vdd_l27-supply = <&pm8921_s7>; 116 vdd_l28-supply = <&pm8921_s7>; 117 118 /* Buck SMPS */ 119 pm8921_s1: s1 { 120 regulator-always-on; 121 regulator-min-microvolt = <1225000>; 122 regulator-max-microvolt = <1225000>; 123 qcom,switch-mode-frequency = <3200000>; 124 bias-pull-down; 125 }; 126 127 pm8921_s2: s2 { 128 regulator-min-microvolt = <1300000>; 129 regulator-max-microvolt = <1300000>; 130 qcom,switch-mode-frequency = <1600000>; 131 bias-pull-down; 132 }; 133 134 pm8921_s3: s3 { 135 regulator-min-microvolt = <500000>; 136 regulator-max-microvolt = <1150000>; 137 qcom,switch-mode-frequency = <4800000>; 138 bias-pull-down; 139 }; 140 141 pm8921_s4: s4 { 142 regulator-always-on; 143 regulator-min-microvolt = <1800000>; 144 regulator-max-microvolt = <1800000>; 145 qcom,switch-mode-frequency = <1600000>; 146 bias-pull-down; 147 qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; 148 }; 149 150 pm8921_s7: s7 { 151 regulator-min-microvolt = <1150000>; 152 regulator-max-microvolt = <1150000>; 153 qcom,switch-mode-frequency = <3200000>; 154 bias-pull-down; 155 }; 156 157 pm8921_s8: s8 { 158 regulator-always-on; 159 regulator-min-microvolt = <2050000>; 160 regulator-max-microvolt = <2050000>; 161 qcom,switch-mode-frequency = <1600000>; 162 bias-pull-down; 163 }; 164 165 /* PMOS LDO */ 166 pm8921_l1: l1 { 167 regulator-always-on; 168 regulator-min-microvolt = <1050000>; 169 regulator-max-microvolt = <1050000>; 170 bias-pull-down; 171 }; 172 173 pm8921_l2: l2 { 174 regulator-min-microvolt = <1200000>; 175 regulator-max-microvolt = <1200000>; 176 bias-pull-down; 177 }; 178 179 pm8921_l3: l3 { 180 regulator-min-microvolt = <3075000>; 181 regulator-max-microvolt = <3075000>; 182 bias-pull-down; 183 }; 184 185 pm8921_l4: l4 { 186 regulator-always-on; 187 regulator-min-microvolt = <1800000>; 188 regulator-max-microvolt = <1800000>; 189 bias-pull-down; 190 }; 191 192 pm8921_l5: l5 { 193 regulator-min-microvolt = <2950000>; 194 regulator-max-microvolt = <2950000>; 195 bias-pull-down; 196 }; 197 198 pm8921_l6: l6 { 199 regulator-min-microvolt = <2950000>; 200 regulator-max-microvolt = <2950000>; 201 bias-pull-down; 202 }; 203 204 pm8921_l7: l7 { 205 regulator-always-on; 206 regulator-min-microvolt = <1850000>; 207 regulator-max-microvolt = <2950000>; 208 bias-pull-down; 209 }; 210 211 pm8921_l8: l8 { 212 regulator-min-microvolt = <2800000>; 213 regulator-max-microvolt = <3000000>; 214 bias-pull-down; 215 }; 216 217 pm8921_l9: l9 { 218 regulator-min-microvolt = <3000000>; 219 regulator-max-microvolt = <3000000>; 220 bias-pull-down; 221 }; 222 223 pm8921_l10: l10 { 224 regulator-min-microvolt = <3000000>; 225 regulator-max-microvolt = <3000000>; 226 bias-pull-down; 227 }; 228 229 pm8921_l11: l11 { 230 regulator-min-microvolt = <2850000>; 231 regulator-max-microvolt = <2850000>; 232 bias-pull-down; 233 }; 234 235 pm8921_l12: l12 { 236 regulator-min-microvolt = <1200000>; 237 regulator-max-microvolt = <1200000>; 238 bias-pull-down; 239 }; 240 241 pm8921_l14: l14 { 242 regulator-min-microvolt = <1800000>; 243 regulator-max-microvolt = <1800000>; 244 bias-pull-down; 245 }; 246 247 pm8921_l15: l15 { 248 regulator-min-microvolt = <1800000>; 249 regulator-max-microvolt = <2950000>; 250 bias-pull-down; 251 }; 252 253 pm8921_l16: l16 { 254 regulator-min-microvolt = <2800000>; 255 regulator-max-microvolt = <2800000>; 256 bias-pull-down; 257 }; 258 259 pm8921_l17: l17 { 260 regulator-min-microvolt = <1800000>; 261 regulator-max-microvolt = <2950000>; 262 bias-pull-down; 263 }; 264 265 pm8921_l18: l18 { 266 regulator-min-microvolt = <1300000>; 267 regulator-max-microvolt = <1300000>; 268 bias-pull-down; 269 }; 270 271 pm8921_l21: l21 { 272 regulator-min-microvolt = <1900000>; 273 regulator-max-microvolt = <1900000>; 274 bias-pull-down; 275 }; 276 277 pm8921_l22: l22 { 278 regulator-min-microvolt = <2750000>; 279 regulator-max-microvolt = <2750000>; 280 bias-pull-down; 281 }; 282 283 pm8921_l23: l23 { 284 regulator-always-on; 285 regulator-min-microvolt = <1800000>; 286 regulator-max-microvolt = <1800000>; 287 bias-pull-down; 288 }; 289 290 pm8921_l24: l24 { 291 regulator-min-microvolt = <750000>; 292 regulator-max-microvolt = <1150000>; 293 bias-pull-down; 294 }; 295 296 pm8921_l25: l25 { 297 regulator-always-on; 298 regulator-min-microvolt = <1250000>; 299 regulator-max-microvolt = <1250000>; 300 bias-pull-down; 301 }; 302 303 /* Low Voltage Switch */ 304 pm8921_lvs1: lvs1 { 305 bias-pull-down; 306 }; 307 308 pm8921_lvs2: lvs2 { 309 bias-pull-down; 310 }; 311 312 pm8921_lvs3: lvs3 { 313 bias-pull-down; 314 }; 315 316 pm8921_lvs4: lvs4 { 317 bias-pull-down; 318 }; 319 320 pm8921_lvs5: lvs5 { 321 bias-pull-down; 322 }; 323 324 pm8921_lvs6: lvs6 { 325 bias-pull-down; 326 }; 327 328 pm8921_lvs7: lvs7 { 329 bias-pull-down; 330 }; 331 332 pm8921_ncp: ncp { 333 regulator-min-microvolt = <1800000>; 334 regulator-max-microvolt = <1800000>; 335 qcom,switch-mode-frequency = <1600000>; 336 }; 337 }; 338}; 339 340/* eMMC */ 341&sdcc1 { 342 status = "okay"; 343}; 344 345/* External micro SD card */ 346&sdcc3 { 347 status = "okay"; 348}; 349