xref: /freebsd/sys/contrib/device-tree/src/arm/qcom/qcom-mdm9615.dtsi (revision a90b9d0159070121c221b966469c3e36d912bf82)
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2/*
3 * Device Tree Source for Qualcomm MDM9615 SoC
4 *
5 * Copyright (C) 2016 BayLibre, SAS.
6 * Author : Neil Armstrong <narmstrong@baylibre.com>
7 */
8
9/dts-v1/;
10
11#include <dt-bindings/interrupt-controller/arm-gic.h>
12#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
13#include <dt-bindings/clock/qcom,lcc-msm8960.h>
14#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
15#include <dt-bindings/mfd/qcom-rpm.h>
16#include <dt-bindings/soc/qcom,gsbi.h>
17
18/ {
19	#address-cells = <1>;
20	#size-cells = <1>;
21	model = "Qualcomm MDM9615";
22	compatible = "qcom,mdm9615";
23	interrupt-parent = <&intc>;
24
25	cpus {
26		#address-cells = <1>;
27		#size-cells = <0>;
28
29		cpu0: cpu@0 {
30			compatible = "arm,cortex-a5";
31			reg = <0>;
32			device_type = "cpu";
33			next-level-cache = <&L2>;
34		};
35	};
36
37	cpu-pmu {
38		compatible = "arm,cortex-a5-pmu";
39		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
40	};
41
42	clocks {
43		cxo_board: cxo_board {
44			compatible = "fixed-clock";
45			#clock-cells = <0>;
46			clock-frequency = <19200000>;
47		};
48	};
49
50	vsdcc_fixed: vsdcc-regulator {
51		compatible = "regulator-fixed";
52		regulator-name = "SDCC Power";
53		regulator-min-microvolt = <2700000>;
54		regulator-max-microvolt = <2700000>;
55		regulator-always-on;
56	};
57
58	soc: soc {
59		#address-cells = <1>;
60		#size-cells = <1>;
61		ranges;
62		compatible = "simple-bus";
63
64		L2: cache-controller@2040000 {
65			compatible = "arm,pl310-cache";
66			reg = <0x02040000 0x1000>;
67			arm,data-latency = <2 2 0>;
68			cache-unified;
69			cache-level = <2>;
70		};
71
72		intc: interrupt-controller@2000000 {
73			compatible = "qcom,msm-qgic2";
74			interrupt-controller;
75			#interrupt-cells = <3>;
76			reg = <0x02000000 0x1000>,
77			      <0x02002000 0x1000>;
78		};
79
80		timer@200a000 {
81			compatible = "qcom,kpss-wdt-mdm9615", "qcom,kpss-timer",
82				     "qcom,msm-timer";
83			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
84				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
85				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
86			reg = <0x0200a000 0x100>;
87			clock-frequency = <27000000>;
88			cpu-offset = <0x80000>;
89		};
90
91		msmgpio: pinctrl@800000 {
92			compatible = "qcom,mdm9615-pinctrl";
93			gpio-controller;
94			gpio-ranges = <&msmgpio 0 0 88>;
95			#gpio-cells = <2>;
96			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
97			interrupt-controller;
98			#interrupt-cells = <2>;
99			reg = <0x800000 0x4000>;
100		};
101
102		gcc: clock-controller@900000 {
103			compatible = "qcom,gcc-mdm9615";
104			#clock-cells = <1>;
105			#power-domain-cells = <1>;
106			#reset-cells = <1>;
107			reg = <0x900000 0x4000>;
108			clocks = <&cxo_board>,
109				 <&lcc PLL4>;
110		};
111
112		lcc: clock-controller@28000000 {
113			compatible = "qcom,lcc-mdm9615";
114			reg = <0x28000000 0x1000>;
115			#clock-cells = <1>;
116			#reset-cells = <1>;
117			clocks = <&cxo_board>,
118				 <&gcc PLL4_VOTE>,
119				 <0>,
120				 <0>, <0>,
121				 <0>, <0>,
122				 <0>;
123			clock-names = "cxo",
124				      "pll4_vote",
125				      "mi2s_codec_clk",
126				      "codec_i2s_mic_codec_clk",
127				      "spare_i2s_mic_codec_clk",
128				      "codec_i2s_spkr_codec_clk",
129				      "spare_i2s_spkr_codec_clk",
130				      "pcm_codec_clk";
131		};
132
133		l2cc: clock-controller@2011000 {
134			compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon";
135			reg = <0x02011000 0x1000>;
136		};
137
138		rng@1a500000 {
139			compatible = "qcom,prng";
140			reg = <0x1a500000 0x200>;
141			clocks = <&gcc PRNG_CLK>;
142			clock-names = "core";
143			assigned-clocks = <&gcc PRNG_CLK>;
144			assigned-clock-rates = <32000000>;
145		};
146
147		gsbi2: gsbi@16100000 {
148			compatible = "qcom,gsbi-v1.0.0";
149			cell-index = <2>;
150			reg = <0x16100000 0x100>;
151			clocks = <&gcc GSBI2_H_CLK>;
152			clock-names = "iface";
153			status = "disabled";
154			#address-cells = <1>;
155			#size-cells = <1>;
156			ranges;
157
158			gsbi2_i2c: i2c@16180000 {
159				compatible = "qcom,i2c-qup-v1.1.1";
160				#address-cells = <1>;
161				#size-cells = <0>;
162				reg = <0x16180000 0x1000>;
163				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
164
165				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
166				clock-names = "core", "iface";
167				status = "disabled";
168			};
169		};
170
171		gsbi3: gsbi@16200000 {
172			compatible = "qcom,gsbi-v1.0.0";
173			cell-index = <3>;
174			reg = <0x16200000 0x100>;
175			clocks = <&gcc GSBI3_H_CLK>;
176			clock-names = "iface";
177			status = "disabled";
178			#address-cells = <1>;
179			#size-cells = <1>;
180			ranges;
181
182			gsbi3_spi: spi@16280000 {
183				compatible = "qcom,spi-qup-v1.1.1";
184				#address-cells = <1>;
185				#size-cells = <0>;
186				reg = <0x16280000 0x1000>;
187				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
188
189				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
190				clock-names = "core", "iface";
191				status = "disabled";
192			};
193		};
194
195		gsbi4: gsbi@16300000 {
196			compatible = "qcom,gsbi-v1.0.0";
197			cell-index = <4>;
198			reg = <0x16300000 0x100>;
199			clocks = <&gcc GSBI4_H_CLK>;
200			clock-names = "iface";
201			status = "disabled";
202			#address-cells = <1>;
203			#size-cells = <1>;
204			ranges;
205
206			syscon-tcsr = <&tcsr>;
207
208			gsbi4_serial: serial@16340000 {
209				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
210				reg = <0x16340000 0x1000>,
211				      <0x16300000 0x1000>;
212				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
213				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
214				clock-names = "core", "iface";
215				status = "disabled";
216			};
217		};
218
219		gsbi5: gsbi@16400000 {
220			compatible = "qcom,gsbi-v1.0.0";
221			cell-index = <5>;
222			reg = <0x16400000 0x100>;
223			clocks = <&gcc GSBI5_H_CLK>;
224			clock-names = "iface";
225			status = "disabled";
226			#address-cells = <1>;
227			#size-cells = <1>;
228			ranges;
229
230			syscon-tcsr = <&tcsr>;
231
232			gsbi5_i2c: i2c@16480000 {
233				compatible = "qcom,i2c-qup-v1.1.1";
234				#address-cells = <1>;
235				#size-cells = <0>;
236				reg = <0x16480000 0x1000>;
237				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
238
239				/* QUP clock is not initialized, set rate */
240				assigned-clocks = <&gcc GSBI5_QUP_CLK>;
241				assigned-clock-rates = <24000000>;
242
243				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
244				clock-names = "core", "iface";
245				status = "disabled";
246			};
247
248			gsbi5_serial: serial@16440000 {
249				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
250				reg = <0x16440000 0x1000>,
251				      <0x16400000 0x1000>;
252				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
253				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
254				clock-names = "core", "iface";
255				status = "disabled";
256			};
257		};
258
259		ssbi: ssbi@500000 {
260			compatible = "qcom,ssbi";
261			reg = <0x500000 0x1000>;
262			qcom,controller-type = "pmic-arbiter";
263		};
264
265		sdcc1bam: dma-controller@12182000 {
266			compatible = "qcom,bam-v1.3.0";
267			reg = <0x12182000 0x8000>;
268			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
269			clocks = <&gcc SDC1_H_CLK>;
270			clock-names = "bam_clk";
271			#dma-cells = <1>;
272			qcom,ee = <0>;
273		};
274
275		sdcc2bam: dma-controller@12142000 {
276			compatible = "qcom,bam-v1.3.0";
277			reg = <0x12142000 0x8000>;
278			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
279			clocks = <&gcc SDC2_H_CLK>;
280			clock-names = "bam_clk";
281			#dma-cells = <1>;
282			qcom,ee = <0>;
283		};
284
285		sdcc1: mmc@12180000 {
286			status = "disabled";
287			compatible = "arm,pl18x", "arm,primecell";
288			arm,primecell-periphid = <0x00051180>;
289			reg = <0x12180000 0x2000>;
290			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
291			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
292			clock-names = "mclk", "apb_pclk";
293			bus-width = <8>;
294			max-frequency = <48000000>;
295			cap-sd-highspeed;
296			cap-mmc-highspeed;
297			vmmc-supply = <&vsdcc_fixed>;
298			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
299			dma-names = "tx", "rx";
300			assigned-clocks = <&gcc SDC1_CLK>;
301			assigned-clock-rates = <400000>;
302		};
303
304		sdcc2: mmc@12140000 {
305			compatible = "arm,pl18x", "arm,primecell";
306			arm,primecell-periphid = <0x00051180>;
307			status = "disabled";
308			reg = <0x12140000 0x2000>;
309			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
310			clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
311			clock-names = "mclk", "apb_pclk";
312			bus-width = <4>;
313			cap-sd-highspeed;
314			cap-mmc-highspeed;
315			max-frequency = <48000000>;
316			no-1-8-v;
317			vmmc-supply = <&vsdcc_fixed>;
318			dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
319			dma-names = "tx", "rx";
320			assigned-clocks = <&gcc SDC2_CLK>;
321			assigned-clock-rates = <400000>;
322		};
323
324		tcsr: syscon@1a400000 {
325			compatible = "qcom,tcsr-mdm9615", "syscon";
326			reg = <0x1a400000 0x100>;
327		};
328
329		rpm: rpm@108000 {
330			compatible = "qcom,rpm-mdm9615";
331			reg = <0x108000 0x1000>;
332
333			qcom,ipc = <&l2cc 0x8 2>;
334
335			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
336				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
337				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
338			interrupt-names = "ack", "err", "wakeup";
339		};
340	};
341};
342