1// SPDX-License-Identifier: GPL-2.0+ OR MIT 2/* 3 * Device Tree Source for Sierra Wireless WP8548 Module 4 * 5 * Copyright (C) 2016 BayLibre, SAS. 6 * Author : Neil Armstrong <narmstrong@baylibre.com> 7 */ 8 9#include "qcom-mdm9615.dtsi" 10 11/ { 12 model = "Sierra Wireless WP8548 Module"; 13 compatible = "swir,wp8548", "qcom,mdm9615"; 14 15 memory@48000000 { 16 device_type = "memory"; 17 reg = <0x48000000 0x7F00000>; 18 }; 19}; 20 21&msmgpio { 22 pinctrl-0 = <&reset_out_pins>; 23 pinctrl-names = "default"; 24 25 gsbi3_pins: gsbi3-state { 26 gsbi3-pins { 27 pins = "gpio8", "gpio9", "gpio10", "gpio11"; 28 function = "gsbi3"; 29 drive-strength = <8>; 30 bias-disable; 31 }; 32 }; 33 34 gsbi4_pins: gsbi4-state { 35 gsbi4-pins { 36 pins = "gpio12", "gpio13", "gpio14", "gpio15"; 37 function = "gsbi4"; 38 drive-strength = <8>; 39 bias-disable; 40 }; 41 }; 42 43 gsbi5_i2c_pins: gsbi5-i2c-state { 44 sda-pins { 45 pins = "gpio16"; 46 function = "gsbi5_i2c"; 47 drive-strength = <8>; 48 bias-disable; 49 }; 50 51 scl-pins { 52 pins = "gpio17"; 53 function = "gsbi5_i2c"; 54 drive-strength = <2>; 55 bias-disable; 56 }; 57 }; 58 59 gsbi5_uart_pins: gsbi5-uart-state { 60 gsbi5-uart-pins { 61 pins = "gpio18", "gpio19"; 62 function = "gsbi5_uart"; 63 drive-strength = <8>; 64 bias-disable; 65 }; 66 }; 67 68 reset_out_pins: reset-out-state { 69 reset-out-pins { 70 pins = "gpio66"; 71 function = "gpio"; 72 drive-strength = <2>; 73 bias-pull-up; 74 output-high; 75 }; 76 }; 77}; 78 79&pmicgpio { 80 usb_vbus_5v_pins: usb-vbus-5v-state { 81 pins = "gpio4"; 82 function = "normal"; 83 output-high; 84 bias-disable; 85 qcom,drive-strength = <1>; 86 power-source = <2>; 87 }; 88}; 89 90&gsbi3 { 91 status = "okay"; 92 qcom,mode = <GSBI_PROT_SPI>; 93}; 94 95&gsbi3_spi { 96 status = "okay"; 97 pinctrl-0 = <&gsbi3_pins>; 98 pinctrl-names = "default"; 99 assigned-clocks = <&gcc GSBI3_QUP_CLK>; 100 assigned-clock-rates = <24000000>; 101}; 102 103&gsbi4 { 104 status = "okay"; 105 qcom,mode = <GSBI_PROT_UART_W_FC>; 106}; 107 108&gsbi4_serial { 109 status = "okay"; 110 pinctrl-0 = <&gsbi4_pins>; 111 pinctrl-names = "default"; 112}; 113 114&gsbi5 { 115 status = "okay"; 116 qcom,mode = <GSBI_PROT_I2C_UART>; 117}; 118 119&gsbi5_i2c { 120 status = "okay"; 121 clock-frequency = <200000>; 122 pinctrl-0 = <&gsbi5_i2c_pins>; 123 pinctrl-names = "default"; 124}; 125 126&gsbi5_serial { 127 status = "okay"; 128 pinctrl-0 = <&gsbi5_uart_pins>; 129 pinctrl-names = "default"; 130}; 131 132&sdcc1 { 133 status = "okay"; 134}; 135