1// SPDX-License-Identifier: GPL-2.0 2/dts-v1/; 3 4#include <dt-bindings/interrupt-controller/arm-gic.h> 5#include <dt-bindings/mfd/qcom-rpm.h> 6#include <dt-bindings/clock/qcom,rpmcc.h> 7#include <dt-bindings/clock/qcom,gcc-ipq806x.h> 8#include <dt-bindings/clock/qcom,lcc-ipq806x.h> 9#include <dt-bindings/gpio/gpio.h> 10#include <dt-bindings/reset/qcom,gcc-ipq806x.h> 11#include <dt-bindings/soc/qcom,gsbi.h> 12#include <dt-bindings/interrupt-controller/arm-gic.h> 13 14/ { 15 #address-cells = <1>; 16 #size-cells = <1>; 17 model = "Qualcomm IPQ8064"; 18 compatible = "qcom,ipq8064"; 19 interrupt-parent = <&intc>; 20 21 cpus { 22 #address-cells = <1>; 23 #size-cells = <0>; 24 25 cpu0: cpu@0 { 26 compatible = "qcom,krait"; 27 enable-method = "qcom,kpss-acc-v1"; 28 device_type = "cpu"; 29 reg = <0>; 30 next-level-cache = <&L2>; 31 qcom,acc = <&acc0>; 32 qcom,saw = <&saw0>; 33 }; 34 35 cpu1: cpu@1 { 36 compatible = "qcom,krait"; 37 enable-method = "qcom,kpss-acc-v1"; 38 device_type = "cpu"; 39 reg = <1>; 40 next-level-cache = <&L2>; 41 qcom,acc = <&acc1>; 42 qcom,saw = <&saw1>; 43 }; 44 45 L2: l2-cache { 46 compatible = "cache"; 47 cache-level = <2>; 48 cache-unified; 49 }; 50 }; 51 52 thermal-zones { 53 sensor0-thermal { 54 polling-delay-passive = <0>; 55 polling-delay = <0>; 56 thermal-sensors = <&tsens 0>; 57 58 trips { 59 cpu-critical { 60 temperature = <105000>; 61 hysteresis = <2000>; 62 type = "critical"; 63 }; 64 65 cpu-hot { 66 temperature = <95000>; 67 hysteresis = <2000>; 68 type = "hot"; 69 }; 70 }; 71 }; 72 73 sensor1-thermal { 74 polling-delay-passive = <0>; 75 polling-delay = <0>; 76 thermal-sensors = <&tsens 1>; 77 78 trips { 79 cpu-critical { 80 temperature = <105000>; 81 hysteresis = <2000>; 82 type = "critical"; 83 }; 84 85 cpu-hot { 86 temperature = <95000>; 87 hysteresis = <2000>; 88 type = "hot"; 89 }; 90 }; 91 }; 92 93 sensor2-thermal { 94 polling-delay-passive = <0>; 95 polling-delay = <0>; 96 thermal-sensors = <&tsens 2>; 97 98 trips { 99 cpu-critical { 100 temperature = <105000>; 101 hysteresis = <2000>; 102 type = "critical"; 103 }; 104 105 cpu-hot { 106 temperature = <95000>; 107 hysteresis = <2000>; 108 type = "hot"; 109 }; 110 }; 111 }; 112 113 sensor3-thermal { 114 polling-delay-passive = <0>; 115 polling-delay = <0>; 116 thermal-sensors = <&tsens 3>; 117 118 trips { 119 cpu-critical { 120 temperature = <105000>; 121 hysteresis = <2000>; 122 type = "critical"; 123 }; 124 125 cpu-hot { 126 temperature = <95000>; 127 hysteresis = <2000>; 128 type = "hot"; 129 }; 130 }; 131 }; 132 133 sensor4-thermal { 134 polling-delay-passive = <0>; 135 polling-delay = <0>; 136 thermal-sensors = <&tsens 4>; 137 138 trips { 139 cpu-critical { 140 temperature = <105000>; 141 hysteresis = <2000>; 142 type = "critical"; 143 }; 144 145 cpu-hot { 146 temperature = <95000>; 147 hysteresis = <2000>; 148 type = "hot"; 149 }; 150 }; 151 }; 152 153 sensor5-thermal { 154 polling-delay-passive = <0>; 155 polling-delay = <0>; 156 thermal-sensors = <&tsens 5>; 157 158 trips { 159 cpu-critical { 160 temperature = <105000>; 161 hysteresis = <2000>; 162 type = "critical"; 163 }; 164 165 cpu-hot { 166 temperature = <95000>; 167 hysteresis = <2000>; 168 type = "hot"; 169 }; 170 }; 171 }; 172 173 sensor6-thermal { 174 polling-delay-passive = <0>; 175 polling-delay = <0>; 176 thermal-sensors = <&tsens 6>; 177 178 trips { 179 cpu-critical { 180 temperature = <105000>; 181 hysteresis = <2000>; 182 type = "critical"; 183 }; 184 185 cpu-hot { 186 temperature = <95000>; 187 hysteresis = <2000>; 188 type = "hot"; 189 }; 190 }; 191 }; 192 193 sensor7-thermal { 194 polling-delay-passive = <0>; 195 polling-delay = <0>; 196 thermal-sensors = <&tsens 7>; 197 198 trips { 199 cpu-critical { 200 temperature = <105000>; 201 hysteresis = <2000>; 202 type = "critical"; 203 }; 204 205 cpu-hot { 206 temperature = <95000>; 207 hysteresis = <2000>; 208 type = "hot"; 209 }; 210 }; 211 }; 212 213 sensor8-thermal { 214 polling-delay-passive = <0>; 215 polling-delay = <0>; 216 thermal-sensors = <&tsens 8>; 217 218 trips { 219 cpu-critical { 220 temperature = <105000>; 221 hysteresis = <2000>; 222 type = "critical"; 223 }; 224 225 cpu-hot { 226 temperature = <95000>; 227 hysteresis = <2000>; 228 type = "hot"; 229 }; 230 }; 231 }; 232 233 sensor9-thermal { 234 polling-delay-passive = <0>; 235 polling-delay = <0>; 236 thermal-sensors = <&tsens 9>; 237 238 trips { 239 cpu-critical { 240 temperature = <105000>; 241 hysteresis = <2000>; 242 type = "critical"; 243 }; 244 245 cpu-hot { 246 temperature = <95000>; 247 hysteresis = <2000>; 248 type = "hot"; 249 }; 250 }; 251 }; 252 253 sensor10-thermal { 254 polling-delay-passive = <0>; 255 polling-delay = <0>; 256 thermal-sensors = <&tsens 10>; 257 258 trips { 259 cpu-critical { 260 temperature = <105000>; 261 hysteresis = <2000>; 262 type = "critical"; 263 }; 264 265 cpu-hot { 266 temperature = <95000>; 267 hysteresis = <2000>; 268 type = "hot"; 269 }; 270 }; 271 }; 272 }; 273 274 memory { 275 device_type = "memory"; 276 reg = <0x0 0x0>; 277 }; 278 279 cpu-pmu { 280 compatible = "qcom,krait-pmu"; 281 interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | 282 IRQ_TYPE_LEVEL_HIGH)>; 283 }; 284 285 reserved-memory { 286 #address-cells = <1>; 287 #size-cells = <1>; 288 ranges; 289 290 nss@40000000 { 291 reg = <0x40000000 0x1000000>; 292 no-map; 293 }; 294 295 smem: smem@41000000 { 296 compatible = "qcom,smem"; 297 reg = <0x41000000 0x200000>; 298 no-map; 299 300 hwlocks = <&sfpb_mutex 3>; 301 }; 302 }; 303 304 clocks { 305 cxo_board: cxo_board { 306 compatible = "fixed-clock"; 307 #clock-cells = <0>; 308 clock-frequency = <25000000>; 309 }; 310 311 pxo_board: pxo_board { 312 compatible = "fixed-clock"; 313 #clock-cells = <0>; 314 clock-frequency = <25000000>; 315 }; 316 317 sleep_clk: sleep_clk { 318 compatible = "fixed-clock"; 319 clock-frequency = <32768>; 320 #clock-cells = <0>; 321 }; 322 }; 323 324 firmware { 325 scm { 326 compatible = "qcom,scm-ipq806x", "qcom,scm"; 327 }; 328 }; 329 330 stmmac_axi_setup: stmmac-axi-config { 331 snps,wr_osr_lmt = <7>; 332 snps,rd_osr_lmt = <7>; 333 snps,blen = <16 0 0 0 0 0 0>; 334 }; 335 336 vsdcc_fixed: vsdcc-regulator { 337 compatible = "regulator-fixed"; 338 regulator-name = "SDCC Power"; 339 regulator-min-microvolt = <3300000>; 340 regulator-max-microvolt = <3300000>; 341 regulator-always-on; 342 }; 343 344 soc: soc { 345 #address-cells = <1>; 346 #size-cells = <1>; 347 ranges; 348 compatible = "simple-bus"; 349 350 rpm: rpm@108000 { 351 compatible = "qcom,rpm-ipq8064"; 352 reg = <0x00108000 0x1000>; 353 qcom,ipc = <&l2cc 0x8 2>; 354 355 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, 356 <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, 357 <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 358 interrupt-names = "ack", "err", "wakeup"; 359 360 clocks = <&gcc RPM_MSG_RAM_H_CLK>; 361 clock-names = "ram"; 362 363 rpmcc: clock-controller { 364 compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; 365 #clock-cells = <1>; 366 }; 367 }; 368 369 ssbi@500000 { 370 compatible = "qcom,ssbi"; 371 reg = <0x00500000 0x1000>; 372 qcom,controller-type = "pmic-arbiter"; 373 }; 374 375 qfprom: qfprom@700000 { 376 compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; 377 reg = <0x00700000 0x1000>; 378 #address-cells = <1>; 379 #size-cells = <1>; 380 speedbin_efuse: speedbin@c0 { 381 reg = <0xc0 0x4>; 382 }; 383 tsens_calib: calib@400 { 384 reg = <0x400 0xb>; 385 }; 386 tsens_calib_backup: calib_backup@410 { 387 reg = <0x410 0xb>; 388 }; 389 }; 390 391 qcom_pinmux: pinmux@800000 { 392 compatible = "qcom,ipq8064-pinctrl"; 393 reg = <0x00800000 0x4000>; 394 395 gpio-controller; 396 gpio-ranges = <&qcom_pinmux 0 0 69>; 397 #gpio-cells = <2>; 398 interrupt-controller; 399 #interrupt-cells = <2>; 400 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; 401 402 pcie0_pins: pcie0_pinmux { 403 mux { 404 pins = "gpio3"; 405 function = "pcie1_rst"; 406 drive-strength = <12>; 407 bias-disable; 408 }; 409 }; 410 411 pcie1_pins: pcie1_pinmux { 412 mux { 413 pins = "gpio48"; 414 function = "pcie2_rst"; 415 drive-strength = <12>; 416 bias-disable; 417 }; 418 }; 419 420 pcie2_pins: pcie2_pinmux { 421 mux { 422 pins = "gpio63"; 423 function = "pcie3_rst"; 424 drive-strength = <12>; 425 bias-disable; 426 }; 427 }; 428 429 i2c4_pins: i2c4-default { 430 pins = "gpio12", "gpio13"; 431 function = "gsbi4"; 432 drive-strength = <12>; 433 bias-disable; 434 }; 435 436 spi_pins: spi_pins { 437 mux { 438 pins = "gpio18", "gpio19", "gpio21"; 439 function = "gsbi5"; 440 drive-strength = <10>; 441 bias-none; 442 }; 443 }; 444 445 leds_pins: leds_pins { 446 mux { 447 pins = "gpio7", "gpio8", "gpio9", 448 "gpio26", "gpio53"; 449 function = "gpio"; 450 drive-strength = <2>; 451 bias-pull-down; 452 output-low; 453 }; 454 }; 455 456 buttons_pins: buttons_pins { 457 mux { 458 pins = "gpio54"; 459 drive-strength = <2>; 460 bias-pull-up; 461 }; 462 }; 463 464 nand_pins: nand_pins { 465 mux { 466 pins = "gpio34", "gpio35", "gpio36", 467 "gpio37", "gpio38", "gpio39", 468 "gpio40", "gpio41", "gpio42", 469 "gpio43", "gpio44", "gpio45", 470 "gpio46", "gpio47"; 471 function = "nand"; 472 drive-strength = <10>; 473 bias-disable; 474 }; 475 476 pullups { 477 pins = "gpio39"; 478 function = "nand"; 479 drive-strength = <10>; 480 bias-pull-up; 481 }; 482 483 hold { 484 pins = "gpio40", "gpio41", "gpio42", 485 "gpio43", "gpio44", "gpio45", 486 "gpio46", "gpio47"; 487 function = "nand"; 488 drive-strength = <10>; 489 bias-bus-hold; 490 }; 491 }; 492 493 mdio0_pins: mdio0-pins { 494 mux { 495 pins = "gpio0", "gpio1"; 496 function = "mdio"; 497 drive-strength = <8>; 498 bias-disable; 499 }; 500 }; 501 502 rgmii2_pins: rgmii2-pins { 503 mux { 504 pins = "gpio27", "gpio28", "gpio29", 505 "gpio30", "gpio31", "gpio32", 506 "gpio51", "gpio52", "gpio59", 507 "gpio60", "gpio61", "gpio62"; 508 function = "rgmii2"; 509 drive-strength = <8>; 510 bias-disable; 511 }; 512 }; 513 }; 514 515 gcc: clock-controller@900000 { 516 compatible = "qcom,gcc-ipq8064", "syscon"; 517 clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>; 518 clock-names = "pxo", "cxo", "pll4"; 519 reg = <0x00900000 0x4000>; 520 #clock-cells = <1>; 521 #reset-cells = <1>; 522 #power-domain-cells = <1>; 523 524 tsens: thermal-sensor { 525 compatible = "qcom,ipq8064-tsens"; 526 527 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; 528 nvmem-cell-names = "calib", "calib_backup"; 529 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; 530 interrupt-names = "uplow"; 531 532 #qcom,sensors = <11>; 533 #thermal-sensor-cells = <1>; 534 }; 535 }; 536 537 sfpb_mutex: hwlock@1200600 { 538 compatible = "qcom,sfpb-mutex"; 539 reg = <0x01200600 0x100>; 540 541 #hwlock-cells = <1>; 542 }; 543 544 intc: interrupt-controller@2000000 { 545 compatible = "qcom,msm-qgic2"; 546 interrupt-controller; 547 #interrupt-cells = <3>; 548 reg = <0x02000000 0x1000>, 549 <0x02002000 0x1000>; 550 }; 551 552 timer@200a000 { 553 compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer", 554 "qcom,msm-timer"; 555 interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | 556 IRQ_TYPE_EDGE_RISING)>, 557 <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | 558 IRQ_TYPE_EDGE_RISING)>, 559 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | 560 IRQ_TYPE_EDGE_RISING)>, 561 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | 562 IRQ_TYPE_EDGE_RISING)>, 563 <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | 564 IRQ_TYPE_EDGE_RISING)>; 565 reg = <0x0200a000 0x100>; 566 clock-frequency = <25000000>; 567 clocks = <&sleep_clk>; 568 clock-names = "sleep"; 569 cpu-offset = <0x80000>; 570 }; 571 572 l2cc: clock-controller@2011000 { 573 compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon"; 574 reg = <0x02011000 0x1000>; 575 clocks = <&gcc PLL8_VOTE>, <&pxo_board>; 576 clock-names = "pll8_vote", "pxo"; 577 #clock-cells = <0>; 578 }; 579 580 acc0: clock-controller@2088000 { 581 compatible = "qcom,kpss-acc-v1"; 582 reg = <0x02088000 0x1000>, <0x02008000 0x1000>; 583 clocks = <&gcc PLL8_VOTE>, <&pxo_board>; 584 clock-names = "pll8_vote", "pxo"; 585 clock-output-names = "acpu0_aux"; 586 #clock-cells = <0>; 587 }; 588 589 saw0: regulator@2089000 { 590 compatible = "qcom,saw2"; 591 reg = <0x02089000 0x1000>, <0x02009000 0x1000>; 592 regulator; 593 }; 594 595 acc1: clock-controller@2098000 { 596 compatible = "qcom,kpss-acc-v1"; 597 reg = <0x02098000 0x1000>, <0x02008000 0x1000>; 598 clocks = <&gcc PLL8_VOTE>, <&pxo_board>; 599 clock-names = "pll8_vote", "pxo"; 600 clock-output-names = "acpu1_aux"; 601 #clock-cells = <0>; 602 }; 603 604 saw1: regulator@2099000 { 605 compatible = "qcom,saw2"; 606 reg = <0x02099000 0x1000>, <0x02009000 0x1000>; 607 regulator; 608 }; 609 610 nss_common: syscon@3000000 { 611 compatible = "syscon"; 612 reg = <0x03000000 0x0000FFFF>; 613 }; 614 615 usb3_0: usb@100f8800 { 616 compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; 617 #address-cells = <1>; 618 #size-cells = <1>; 619 reg = <0x100f8800 0x8000>; 620 clocks = <&gcc USB30_0_MASTER_CLK>; 621 clock-names = "core"; 622 623 ranges; 624 625 resets = <&gcc USB30_0_MASTER_RESET>; 626 reset-names = "master"; 627 628 status = "disabled"; 629 630 dwc3_0: usb@10000000 { 631 compatible = "snps,dwc3"; 632 reg = <0x10000000 0xcd00>; 633 interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; 634 phys = <&hs_phy_0>, <&ss_phy_0>; 635 phy-names = "usb2-phy", "usb3-phy"; 636 dr_mode = "host"; 637 snps,dis_u3_susphy_quirk; 638 }; 639 }; 640 641 hs_phy_0: phy@100f8800 { 642 compatible = "qcom,ipq806x-usb-phy-hs"; 643 reg = <0x100f8800 0x30>; 644 clocks = <&gcc USB30_0_UTMI_CLK>; 645 clock-names = "ref"; 646 #phy-cells = <0>; 647 648 status = "disabled"; 649 }; 650 651 ss_phy_0: phy@100f8830 { 652 compatible = "qcom,ipq806x-usb-phy-ss"; 653 reg = <0x100f8830 0x30>; 654 clocks = <&gcc USB30_0_MASTER_CLK>; 655 clock-names = "ref"; 656 #phy-cells = <0>; 657 658 status = "disabled"; 659 }; 660 661 usb3_1: usb@110f8800 { 662 compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; 663 #address-cells = <1>; 664 #size-cells = <1>; 665 reg = <0x110f8800 0x8000>; 666 clocks = <&gcc USB30_1_MASTER_CLK>; 667 clock-names = "core"; 668 669 ranges; 670 671 resets = <&gcc USB30_1_MASTER_RESET>; 672 reset-names = "master"; 673 674 status = "disabled"; 675 676 dwc3_1: usb@11000000 { 677 compatible = "snps,dwc3"; 678 reg = <0x11000000 0xcd00>; 679 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; 680 phys = <&hs_phy_1>, <&ss_phy_1>; 681 phy-names = "usb2-phy", "usb3-phy"; 682 dr_mode = "host"; 683 snps,dis_u3_susphy_quirk; 684 }; 685 }; 686 687 hs_phy_1: phy@110f8800 { 688 compatible = "qcom,ipq806x-usb-phy-hs"; 689 reg = <0x110f8800 0x30>; 690 clocks = <&gcc USB30_1_UTMI_CLK>; 691 clock-names = "ref"; 692 #phy-cells = <0>; 693 694 status = "disabled"; 695 }; 696 697 ss_phy_1: phy@110f8830 { 698 compatible = "qcom,ipq806x-usb-phy-ss"; 699 reg = <0x110f8830 0x30>; 700 clocks = <&gcc USB30_1_MASTER_CLK>; 701 clock-names = "ref"; 702 #phy-cells = <0>; 703 704 status = "disabled"; 705 }; 706 707 sdcc3bam: dma-controller@12182000 { 708 compatible = "qcom,bam-v1.3.0"; 709 reg = <0x12182000 0x8000>; 710 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 711 clocks = <&gcc SDC3_H_CLK>; 712 clock-names = "bam_clk"; 713 #dma-cells = <1>; 714 qcom,ee = <0>; 715 }; 716 717 sdcc1bam: dma-controller@12402000 { 718 compatible = "qcom,bam-v1.3.0"; 719 reg = <0x12402000 0x8000>; 720 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 721 clocks = <&gcc SDC1_H_CLK>; 722 clock-names = "bam_clk"; 723 #dma-cells = <1>; 724 qcom,ee = <0>; 725 }; 726 727 amba: amba { 728 compatible = "simple-bus"; 729 #address-cells = <1>; 730 #size-cells = <1>; 731 ranges; 732 733 sdcc3: mmc@12180000 { 734 compatible = "arm,pl18x", "arm,primecell"; 735 arm,primecell-periphid = <0x00051180>; 736 status = "disabled"; 737 reg = <0x12180000 0x2000>; 738 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; 739 clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; 740 clock-names = "mclk", "apb_pclk"; 741 bus-width = <8>; 742 cap-sd-highspeed; 743 cap-mmc-highspeed; 744 max-frequency = <192000000>; 745 sd-uhs-sdr104; 746 sd-uhs-ddr50; 747 vqmmc-supply = <&vsdcc_fixed>; 748 dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; 749 dma-names = "tx", "rx"; 750 }; 751 752 sdcc1: mmc@12400000 { 753 status = "disabled"; 754 compatible = "arm,pl18x", "arm,primecell"; 755 arm,primecell-periphid = <0x00051180>; 756 reg = <0x12400000 0x2000>; 757 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; 758 clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; 759 clock-names = "mclk", "apb_pclk"; 760 bus-width = <8>; 761 max-frequency = <96000000>; 762 non-removable; 763 cap-sd-highspeed; 764 cap-mmc-highspeed; 765 vmmc-supply = <&vsdcc_fixed>; 766 dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; 767 dma-names = "tx", "rx"; 768 }; 769 }; 770 771 gsbi1: gsbi@12440000 { 772 compatible = "qcom,gsbi-v1.0.0"; 773 reg = <0x12440000 0x100>; 774 cell-index = <1>; 775 clocks = <&gcc GSBI1_H_CLK>; 776 clock-names = "iface"; 777 #address-cells = <1>; 778 #size-cells = <1>; 779 ranges; 780 781 syscon-tcsr = <&tcsr>; 782 783 status = "disabled"; 784 785 gsbi1_serial: serial@12450000 { 786 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; 787 reg = <0x12450000 0x100>, 788 <0x12400000 0x03>; 789 interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; 790 clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; 791 clock-names = "core", "iface"; 792 793 status = "disabled"; 794 }; 795 796 gsbi1_i2c: i2c@12460000 { 797 compatible = "qcom,i2c-qup-v1.1.1"; 798 reg = <0x12460000 0x1000>; 799 interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; 800 clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; 801 clock-names = "core", "iface"; 802 #address-cells = <1>; 803 #size-cells = <0>; 804 805 status = "disabled"; 806 }; 807 }; 808 809 gsbi2: gsbi@12480000 { 810 compatible = "qcom,gsbi-v1.0.0"; 811 cell-index = <2>; 812 reg = <0x12480000 0x100>; 813 clocks = <&gcc GSBI2_H_CLK>; 814 clock-names = "iface"; 815 #address-cells = <1>; 816 #size-cells = <1>; 817 ranges; 818 status = "disabled"; 819 820 syscon-tcsr = <&tcsr>; 821 822 gsbi2_serial: serial@12490000 { 823 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; 824 reg = <0x12490000 0x1000>, 825 <0x12480000 0x1000>; 826 interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; 827 clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; 828 clock-names = "core", "iface"; 829 status = "disabled"; 830 }; 831 832 gsbi2_i2c: i2c@124a0000 { 833 compatible = "qcom,i2c-qup-v1.1.1"; 834 reg = <0x124a0000 0x1000>; 835 interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; 836 837 clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; 838 clock-names = "core", "iface"; 839 status = "disabled"; 840 841 #address-cells = <1>; 842 #size-cells = <0>; 843 }; 844 }; 845 846 gsbi4: gsbi@16300000 { 847 compatible = "qcom,gsbi-v1.0.0"; 848 cell-index = <4>; 849 reg = <0x16300000 0x100>; 850 clocks = <&gcc GSBI4_H_CLK>; 851 clock-names = "iface"; 852 #address-cells = <1>; 853 #size-cells = <1>; 854 ranges; 855 status = "disabled"; 856 857 syscon-tcsr = <&tcsr>; 858 859 gsbi4_serial: serial@16340000 { 860 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; 861 reg = <0x16340000 0x1000>, 862 <0x16300000 0x1000>; 863 interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; 864 clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; 865 clock-names = "core", "iface"; 866 status = "disabled"; 867 }; 868 869 i2c@16380000 { 870 compatible = "qcom,i2c-qup-v1.1.1"; 871 reg = <0x16380000 0x1000>; 872 interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; 873 874 clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; 875 clock-names = "core", "iface"; 876 status = "disabled"; 877 878 #address-cells = <1>; 879 #size-cells = <0>; 880 }; 881 }; 882 883 gsbi6: gsbi@16500000 { 884 compatible = "qcom,gsbi-v1.0.0"; 885 reg = <0x16500000 0x100>; 886 cell-index = <6>; 887 clocks = <&gcc GSBI6_H_CLK>; 888 clock-names = "iface"; 889 #address-cells = <1>; 890 #size-cells = <1>; 891 ranges; 892 893 syscon-tcsr = <&tcsr>; 894 895 status = "disabled"; 896 897 gsbi6_i2c: i2c@16580000 { 898 compatible = "qcom,i2c-qup-v1.1.1"; 899 reg = <0x16580000 0x1000>; 900 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; 901 902 clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; 903 clock-names = "core", "iface"; 904 905 #address-cells = <1>; 906 #size-cells = <0>; 907 908 status = "disabled"; 909 }; 910 911 gsbi6_spi: spi@16580000 { 912 compatible = "qcom,spi-qup-v1.1.1"; 913 reg = <0x16580000 0x1000>; 914 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; 915 916 clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; 917 clock-names = "core", "iface"; 918 919 #address-cells = <1>; 920 #size-cells = <0>; 921 922 status = "disabled"; 923 }; 924 }; 925 926 gsbi7: gsbi@16600000 { 927 status = "disabled"; 928 compatible = "qcom,gsbi-v1.0.0"; 929 cell-index = <7>; 930 reg = <0x16600000 0x100>; 931 clocks = <&gcc GSBI7_H_CLK>; 932 clock-names = "iface"; 933 #address-cells = <1>; 934 #size-cells = <1>; 935 ranges; 936 syscon-tcsr = <&tcsr>; 937 938 gsbi7_serial: serial@16640000 { 939 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; 940 reg = <0x16640000 0x1000>, 941 <0x16600000 0x1000>; 942 interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; 943 clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; 944 clock-names = "core", "iface"; 945 status = "disabled"; 946 }; 947 948 gsbi7_i2c: i2c@16680000 { 949 compatible = "qcom,i2c-qup-v1.1.1"; 950 reg = <0x16680000 0x1000>; 951 interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; 952 953 clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; 954 clock-names = "core", "iface"; 955 956 #address-cells = <1>; 957 #size-cells = <0>; 958 959 status = "disabled"; 960 }; 961 }; 962 963 adm_dma: dma-controller@18300000 { 964 compatible = "qcom,adm"; 965 reg = <0x18300000 0x100000>; 966 interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; 967 #dma-cells = <1>; 968 969 clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; 970 clock-names = "core", "iface"; 971 972 resets = <&gcc ADM0_RESET>, 973 <&gcc ADM0_PBUS_RESET>, 974 <&gcc ADM0_C0_RESET>, 975 <&gcc ADM0_C1_RESET>, 976 <&gcc ADM0_C2_RESET>; 977 reset-names = "clk", "pbus", "c0", "c1", "c2"; 978 qcom,ee = <0>; 979 980 status = "disabled"; 981 }; 982 983 gsbi5: gsbi@1a200000 { 984 compatible = "qcom,gsbi-v1.0.0"; 985 cell-index = <5>; 986 reg = <0x1a200000 0x100>; 987 clocks = <&gcc GSBI5_H_CLK>; 988 clock-names = "iface"; 989 #address-cells = <1>; 990 991 #size-cells = <1>; 992 ranges; 993 status = "disabled"; 994 995 syscon-tcsr = <&tcsr>; 996 997 gsbi5_serial: serial@1a240000 { 998 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; 999 reg = <0x1a240000 0x1000>, 1000 <0x1a200000 0x1000>; 1001 interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; 1002 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; 1003 clock-names = "core", "iface"; 1004 status = "disabled"; 1005 }; 1006 1007 i2c@1a280000 { 1008 compatible = "qcom,i2c-qup-v1.1.1"; 1009 reg = <0x1a280000 0x1000>; 1010 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; 1011 1012 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; 1013 clock-names = "core", "iface"; 1014 status = "disabled"; 1015 1016 #address-cells = <1>; 1017 #size-cells = <0>; 1018 }; 1019 1020 spi@1a280000 { 1021 compatible = "qcom,spi-qup-v1.1.1"; 1022 reg = <0x1a280000 0x1000>; 1023 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; 1024 1025 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; 1026 clock-names = "core", "iface"; 1027 status = "disabled"; 1028 1029 #address-cells = <1>; 1030 #size-cells = <0>; 1031 }; 1032 }; 1033 1034 tcsr: syscon@1a400000 { 1035 compatible = "qcom,tcsr-ipq8064", "syscon"; 1036 reg = <0x1a400000 0x100>; 1037 }; 1038 1039 rng@1a500000 { 1040 compatible = "qcom,prng"; 1041 reg = <0x1a500000 0x200>; 1042 clocks = <&gcc PRNG_CLK>; 1043 clock-names = "core"; 1044 }; 1045 1046 nand: nand-controller@1ac00000 { 1047 compatible = "qcom,ipq806x-nand"; 1048 reg = <0x1ac00000 0x800>; 1049 1050 pinctrl-0 = <&nand_pins>; 1051 pinctrl-names = "default"; 1052 1053 clocks = <&gcc EBI2_CLK>, 1054 <&gcc EBI2_AON_CLK>; 1055 clock-names = "core", "aon"; 1056 1057 dmas = <&adm_dma 3>; 1058 dma-names = "rxtx"; 1059 qcom,cmd-crci = <15>; 1060 qcom,data-crci = <3>; 1061 1062 #address-cells = <1>; 1063 #size-cells = <0>; 1064 1065 status = "disabled"; 1066 }; 1067 1068 sata_phy: sata-phy@1b400000 { 1069 compatible = "qcom,ipq806x-sata-phy"; 1070 reg = <0x1b400000 0x200>; 1071 1072 clocks = <&gcc SATA_PHY_CFG_CLK>; 1073 clock-names = "cfg"; 1074 1075 #phy-cells = <0>; 1076 status = "disabled"; 1077 }; 1078 1079 pcie0: pcie@1b500000 { 1080 compatible = "qcom,pcie-ipq8064"; 1081 reg = <0x1b500000 0x1000 1082 0x1b502000 0x80 1083 0x1b600000 0x100 1084 0x0ff00000 0x100000>; 1085 reg-names = "dbi", "elbi", "parf", "config"; 1086 device_type = "pci"; 1087 linux,pci-domain = <0>; 1088 bus-range = <0x00 0xff>; 1089 num-lanes = <1>; 1090 #address-cells = <3>; 1091 #size-cells = <2>; 1092 1093 ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000 /* I/O */ 1094 0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */ 1095 1096 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 1097 interrupt-names = "msi"; 1098 #interrupt-cells = <1>; 1099 interrupt-map-mask = <0 0 0 0x7>; 1100 interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 1101 <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 1102 <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 1103 <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 1104 1105 clocks = <&gcc PCIE_A_CLK>, 1106 <&gcc PCIE_H_CLK>, 1107 <&gcc PCIE_PHY_CLK>, 1108 <&gcc PCIE_AUX_CLK>, 1109 <&gcc PCIE_ALT_REF_CLK>; 1110 clock-names = "core", "iface", "phy", "aux", "ref"; 1111 1112 assigned-clocks = <&gcc PCIE_ALT_REF_CLK>; 1113 assigned-clock-rates = <100000000>; 1114 1115 resets = <&gcc PCIE_ACLK_RESET>, 1116 <&gcc PCIE_HCLK_RESET>, 1117 <&gcc PCIE_POR_RESET>, 1118 <&gcc PCIE_PCI_RESET>, 1119 <&gcc PCIE_PHY_RESET>, 1120 <&gcc PCIE_EXT_RESET>; 1121 reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; 1122 1123 pinctrl-0 = <&pcie0_pins>; 1124 pinctrl-names = "default"; 1125 1126 status = "disabled"; 1127 perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; 1128 }; 1129 1130 pcie1: pcie@1b700000 { 1131 compatible = "qcom,pcie-ipq8064"; 1132 reg = <0x1b700000 0x1000 1133 0x1b702000 0x80 1134 0x1b800000 0x100 1135 0x31f00000 0x100000>; 1136 reg-names = "dbi", "elbi", "parf", "config"; 1137 device_type = "pci"; 1138 linux,pci-domain = <1>; 1139 bus-range = <0x00 0xff>; 1140 num-lanes = <1>; 1141 #address-cells = <3>; 1142 #size-cells = <2>; 1143 1144 ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000 /* I/O */ 1145 0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */ 1146 1147 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; 1148 interrupt-names = "msi"; 1149 #interrupt-cells = <1>; 1150 interrupt-map-mask = <0 0 0 0x7>; 1151 interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 1152 <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 1153 <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 1154 <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 1155 1156 clocks = <&gcc PCIE_1_A_CLK>, 1157 <&gcc PCIE_1_H_CLK>, 1158 <&gcc PCIE_1_PHY_CLK>, 1159 <&gcc PCIE_1_AUX_CLK>, 1160 <&gcc PCIE_1_ALT_REF_CLK>; 1161 clock-names = "core", "iface", "phy", "aux", "ref"; 1162 1163 assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>; 1164 assigned-clock-rates = <100000000>; 1165 1166 resets = <&gcc PCIE_1_ACLK_RESET>, 1167 <&gcc PCIE_1_HCLK_RESET>, 1168 <&gcc PCIE_1_POR_RESET>, 1169 <&gcc PCIE_1_PCI_RESET>, 1170 <&gcc PCIE_1_PHY_RESET>, 1171 <&gcc PCIE_1_EXT_RESET>; 1172 reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; 1173 1174 pinctrl-0 = <&pcie1_pins>; 1175 pinctrl-names = "default"; 1176 1177 status = "disabled"; 1178 perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; 1179 }; 1180 1181 pcie2: pcie@1b900000 { 1182 compatible = "qcom,pcie-ipq8064"; 1183 reg = <0x1b900000 0x1000 1184 0x1b902000 0x80 1185 0x1ba00000 0x100 1186 0x35f00000 0x100000>; 1187 reg-names = "dbi", "elbi", "parf", "config"; 1188 device_type = "pci"; 1189 linux,pci-domain = <2>; 1190 bus-range = <0x00 0xff>; 1191 num-lanes = <1>; 1192 #address-cells = <3>; 1193 #size-cells = <2>; 1194 1195 ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000 /* I/O */ 1196 0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */ 1197 1198 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 1199 interrupt-names = "msi"; 1200 #interrupt-cells = <1>; 1201 interrupt-map-mask = <0 0 0 0x7>; 1202 interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 1203 <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 1204 <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 1205 <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 1206 1207 clocks = <&gcc PCIE_2_A_CLK>, 1208 <&gcc PCIE_2_H_CLK>, 1209 <&gcc PCIE_2_PHY_CLK>, 1210 <&gcc PCIE_2_AUX_CLK>, 1211 <&gcc PCIE_2_ALT_REF_CLK>; 1212 clock-names = "core", "iface", "phy", "aux", "ref"; 1213 1214 assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>; 1215 assigned-clock-rates = <100000000>; 1216 1217 resets = <&gcc PCIE_2_ACLK_RESET>, 1218 <&gcc PCIE_2_HCLK_RESET>, 1219 <&gcc PCIE_2_POR_RESET>, 1220 <&gcc PCIE_2_PCI_RESET>, 1221 <&gcc PCIE_2_PHY_RESET>, 1222 <&gcc PCIE_2_EXT_RESET>; 1223 reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; 1224 1225 pinctrl-0 = <&pcie2_pins>; 1226 pinctrl-names = "default"; 1227 1228 status = "disabled"; 1229 perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; 1230 }; 1231 1232 qsgmii_csr: syscon@1bb00000 { 1233 compatible = "syscon"; 1234 reg = <0x1bb00000 0x000001FF>; 1235 }; 1236 1237 lcc: clock-controller@28000000 { 1238 compatible = "qcom,lcc-ipq8064"; 1239 reg = <0x28000000 0x1000>; 1240 #clock-cells = <1>; 1241 #reset-cells = <1>; 1242 }; 1243 1244 lpass@28100000 { 1245 compatible = "qcom,lpass-cpu"; 1246 status = "disabled"; 1247 clocks = <&lcc AHBIX_CLK>, 1248 <&lcc MI2S_OSR_CLK>, 1249 <&lcc MI2S_BIT_CLK>; 1250 clock-names = "ahbix-clk", 1251 "mi2s-osr-clk", 1252 "mi2s-bit-clk"; 1253 interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; 1254 interrupt-names = "lpass-irq-lpaif"; 1255 reg = <0x28100000 0x10000>; 1256 reg-names = "lpass-lpaif"; 1257 }; 1258 1259 sata: sata@29000000 { 1260 compatible = "qcom,ipq806x-ahci", "generic-ahci"; 1261 reg = <0x29000000 0x180>; 1262 1263 interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; 1264 1265 clocks = <&gcc SFAB_SATA_S_H_CLK>, 1266 <&gcc SATA_H_CLK>, 1267 <&gcc SATA_A_CLK>, 1268 <&gcc SATA_RXOOB_CLK>, 1269 <&gcc SATA_PMALIVE_CLK>; 1270 clock-names = "slave_face", "iface", "core", 1271 "rxoob", "pmalive"; 1272 1273 assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; 1274 assigned-clock-rates = <100000000>, <100000000>; 1275 1276 phys = <&sata_phy>; 1277 phy-names = "sata-phy"; 1278 status = "disabled"; 1279 }; 1280 1281 gmac0: ethernet@37000000 { 1282 device_type = "network"; 1283 compatible = "qcom,ipq806x-gmac", "snps,dwmac"; 1284 reg = <0x37000000 0x200000>; 1285 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; 1286 interrupt-names = "macirq"; 1287 1288 snps,axi-config = <&stmmac_axi_setup>; 1289 snps,pbl = <32>; 1290 snps,aal; 1291 1292 qcom,nss-common = <&nss_common>; 1293 qcom,qsgmii-csr = <&qsgmii_csr>; 1294 1295 clocks = <&gcc GMAC_CORE1_CLK>; 1296 clock-names = "stmmaceth"; 1297 1298 resets = <&gcc GMAC_CORE1_RESET>, 1299 <&gcc GMAC_AHB_RESET>; 1300 reset-names = "stmmaceth", "ahb"; 1301 1302 status = "disabled"; 1303 }; 1304 1305 gmac1: ethernet@37200000 { 1306 device_type = "network"; 1307 compatible = "qcom,ipq806x-gmac", "snps,dwmac"; 1308 reg = <0x37200000 0x200000>; 1309 interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; 1310 interrupt-names = "macirq"; 1311 1312 snps,axi-config = <&stmmac_axi_setup>; 1313 snps,pbl = <32>; 1314 snps,aal; 1315 1316 qcom,nss-common = <&nss_common>; 1317 qcom,qsgmii-csr = <&qsgmii_csr>; 1318 1319 clocks = <&gcc GMAC_CORE2_CLK>; 1320 clock-names = "stmmaceth"; 1321 1322 resets = <&gcc GMAC_CORE2_RESET>, 1323 <&gcc GMAC_AHB_RESET>; 1324 reset-names = "stmmaceth", "ahb"; 1325 1326 status = "disabled"; 1327 }; 1328 1329 gmac2: ethernet@37400000 { 1330 device_type = "network"; 1331 compatible = "qcom,ipq806x-gmac", "snps,dwmac"; 1332 reg = <0x37400000 0x200000>; 1333 interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; 1334 interrupt-names = "macirq"; 1335 1336 snps,axi-config = <&stmmac_axi_setup>; 1337 snps,pbl = <32>; 1338 snps,aal; 1339 1340 qcom,nss-common = <&nss_common>; 1341 qcom,qsgmii-csr = <&qsgmii_csr>; 1342 1343 clocks = <&gcc GMAC_CORE3_CLK>; 1344 clock-names = "stmmaceth"; 1345 1346 resets = <&gcc GMAC_CORE3_RESET>, 1347 <&gcc GMAC_AHB_RESET>; 1348 reset-names = "stmmaceth", "ahb"; 1349 1350 status = "disabled"; 1351 }; 1352 1353 gmac3: ethernet@37600000 { 1354 device_type = "network"; 1355 compatible = "qcom,ipq806x-gmac", "snps,dwmac"; 1356 reg = <0x37600000 0x200000>; 1357 interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; 1358 interrupt-names = "macirq"; 1359 1360 snps,axi-config = <&stmmac_axi_setup>; 1361 snps,pbl = <32>; 1362 snps,aal; 1363 1364 qcom,nss-common = <&nss_common>; 1365 qcom,qsgmii-csr = <&qsgmii_csr>; 1366 1367 clocks = <&gcc GMAC_CORE4_CLK>; 1368 clock-names = "stmmaceth"; 1369 1370 resets = <&gcc GMAC_CORE4_RESET>, 1371 <&gcc GMAC_AHB_RESET>; 1372 reset-names = "stmmaceth", "ahb"; 1373 1374 status = "disabled"; 1375 }; 1376 }; 1377}; 1378