xref: /freebsd/sys/contrib/device-tree/src/arm/qcom/qcom-ipq4019-ap.dk07.1-c1.dts (revision a90b9d0159070121c221b966469c3e36d912bf82)
1// SPDX-License-Identifier: GPL-2.0
2// Copyright (c) 2018, The Linux Foundation. All rights reserved.
3
4#include <dt-bindings/gpio/gpio.h>
5#include "qcom-ipq4019-ap.dk07.1.dtsi"
6
7/ {
8	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
9	compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019";
10
11	soc {
12		pci@40000000 {
13			status = "okay";
14			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
15		};
16
17		spi@78b6000 {
18			status = "okay";
19		};
20
21		pinctrl@1000000 {
22			serial_1_pins: serial1-pinmux {
23				pins = "gpio8", "gpio9",
24					"gpio10", "gpio11";
25				function = "blsp_uart1";
26				bias-disable;
27			};
28
29			spi_0_pins: spi-0-pinmux {
30				pinmux {
31					function = "blsp_spi0";
32					pins = "gpio13", "gpio14", "gpio15";
33					bias-disable;
34				};
35				pinmux_cs {
36					function = "gpio";
37					pins = "gpio12";
38					bias-disable;
39					output-high;
40				};
41			};
42		};
43
44		serial@78b0000 {
45			pinctrl-0 = <&serial_1_pins>;
46			pinctrl-names = "default";
47			status = "okay";
48		};
49
50		spi@78b5000 {
51			pinctrl-0 = <&spi_0_pins>;
52			pinctrl-names = "default";
53			status = "okay";
54			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
55
56			flash@0 {
57				#address-cells = <1>;
58				#size-cells = <1>;
59				reg = <0>;
60				compatible = "micron,n25q128a11", "jedec,spi-nor";
61				spi-max-frequency = <24000000>;
62			};
63		};
64	};
65};
66