xref: /freebsd/sys/contrib/device-tree/src/arm/nxp/vf/vf610-cosmic.dts (revision 5b56413d04e608379c9a306373554a8e4d321bc0)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Freescale Semiconductor, Inc.
4 * Copyright 2013 Linaro Limited
5 */
6
7/dts-v1/;
8#include "vf610.dtsi"
9
10/ {
11	model = "PHYTEC Cosmic/Cosmic+ Board";
12	compatible = "phytec,vf610-cosmic", "fsl,vf610";
13
14	chosen {
15		bootargs = "console=ttyLP1,115200";
16	};
17
18	memory@80000000 {
19		device_type = "memory";
20		reg = <0x80000000 0x10000000>;
21	};
22
23	enet_ext: enet_ext {
24		compatible = "fixed-clock";
25		#clock-cells = <0>;
26		clock-frequency = <50000000>;
27	};
28};
29
30&clks {
31	clocks = <&sxosc>, <&fxosc>, <&enet_ext>;
32	clock-names = "sxosc", "fxosc", "enet_ext";
33};
34
35&esdhc1 {
36	pinctrl-names = "default";
37	pinctrl-0 = <&pinctrl_esdhc1>;
38	bus-width = <4>;
39	status = "okay";
40};
41
42&fec1 {
43	phy-mode = "rmii";
44	pinctrl-names = "default";
45	pinctrl-0 = <&pinctrl_fec1>;
46	status = "okay";
47};
48
49&iomuxc {
50	vf610-cosmic {
51		pinctrl_esdhc1: esdhc1grp {
52			fsl,pins = <
53				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
54				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
55				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
56				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
57				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
58				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
59				VF610_PAD_PTB28__GPIO_98	0x219d
60			>;
61		};
62
63		pinctrl_fec1: fec1grp {
64			fsl,pins = <
65				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
66				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
67				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
68				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
69				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
70				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
71				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
72				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
73				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
74			>;
75		};
76
77		pinctrl_uart1: uart1grp {
78			fsl,pins = <
79				VF610_PAD_PTB4__UART1_TX		0x21a2
80				VF610_PAD_PTB5__UART1_RX		0x21a1
81			>;
82		};
83	};
84};
85
86&uart1 {
87	pinctrl-names = "default";
88	pinctrl-0 = <&pinctrl_uart1>;
89	status = "okay";
90};
91