1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Eukréa Electromatique <eric@eukrea.com> 4 * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> 5 */ 6 7/* 8 * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC 9 */ 10 11/dts-v1/; 12#include "imx28-eukrea-mbmx28lc.dtsi" 13 14/ { 15 model = "Eukrea Electromatique MBMX283LC"; 16 compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28"; 17 18 memory@40000000 { 19 device_type = "memory"; 20 reg = <0x40000000 0x04000000>; 21 }; 22}; 23 24&gpmi { 25 pinctrl-names = "default"; 26 pinctrl-0 = <&gpmi_pins_a>; 27 status = "okay"; 28}; 29 30&i2c0 { 31 pinctrl-names = "default"; 32 pinctrl-0 = <&i2c0_pins_a>; 33 status = "okay"; 34 35 pcf8563: rtc@51 { 36 compatible = "nxp,pcf8563"; 37 reg = <0x51>; 38 }; 39}; 40 41 42&mac0 { 43 phy-mode = "rmii"; 44 pinctrl-names = "default"; 45 pinctrl-0 = <&mac0_pins_a>; 46 phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; 47 status = "okay"; 48}; 49 50&pinctrl{ 51 pinctrl-names = "default"; 52 pinctrl-0 = <&hog_pins_cpuimx283>; 53 54 hog_pins_cpuimx283: hog-cpuimx283@0 { 55 reg = <0>; 56 fsl,pinmux-ids = < 57 MX28_PAD_ENET0_RX_CLK__GPIO_4_13 58 MX28_PAD_ENET0_TX_CLK__GPIO_4_5 59 >; 60 fsl,drive-strength = <MXS_DRIVE_4mA>; 61 fsl,voltage = <MXS_VOLTAGE_HIGH>; 62 fsl,pull-up = <MXS_PULL_ENABLE>; 63 }; 64}; 65