xref: /freebsd/sys/contrib/device-tree/src/arm/nxp/ls/ls1021a-twr.dts (revision aa1a8ff2d6dbc51ef058f46f3db5a8bb77967145) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2013-2014 Freescale Semiconductor, Inc.
4 * Copyright 2018 NXP
5 */
6
7/dts-v1/;
8#include "ls1021a.dtsi"
9
10/ {
11	model = "LS1021A TWR Board";
12	compatible = "fsl,ls1021a-twr", "fsl,ls1021a";
13
14	aliases {
15		enet2_rgmii_phy = &rgmii_phy1;
16		enet0_sgmii_phy = &sgmii_phy2;
17		enet1_sgmii_phy = &sgmii_phy0;
18	};
19
20	sys_mclk: clock-mclk {
21		compatible = "fixed-clock";
22		#clock-cells = <0>;
23		clock-frequency = <24576000>;
24	};
25
26	reg_3p3v: regulator {
27		compatible = "regulator-fixed";
28		regulator-name = "3P3V";
29		regulator-min-microvolt = <3300000>;
30		regulator-max-microvolt = <3300000>;
31		regulator-always-on;
32	};
33
34	sound {
35		compatible = "simple-audio-card";
36		simple-audio-card,format = "i2s";
37		simple-audio-card,widgets =
38			"Microphone", "Microphone Jack",
39			"Headphone", "Headphone Jack",
40			"Speaker", "Speaker Ext",
41			"Line", "Line In Jack";
42		simple-audio-card,routing =
43			"MIC_IN", "Microphone Jack",
44			"Microphone Jack", "Mic Bias",
45			"LINE_IN", "Line In Jack",
46			"Headphone Jack", "HP_OUT",
47			"Speaker Ext", "LINE_OUT";
48
49		simple-audio-card,cpu {
50			sound-dai = <&sai1>;
51			frame-master;
52			bitclock-master;
53		};
54
55		simple-audio-card,codec {
56			sound-dai = <&codec>;
57			frame-master;
58			bitclock-master;
59		};
60	};
61
62	panel: panel {
63		compatible = "nec,nl4827hc19-05b";
64
65		port {
66			panel_in: endpoint {
67				remote-endpoint = <&dcu_out>;
68			};
69		};
70	};
71};
72
73&dcu {
74	status = "okay";
75
76	port {
77		dcu_out: endpoint {
78			remote-endpoint = <&panel_in>;
79		};
80	};
81};
82
83&dspi1 {
84	bus-num = <0>;
85	status = "okay";
86
87	dspiflash: s25fl064k@0 {
88		#address-cells = <1>;
89		#size-cells = <1>;
90		compatible = "spansion,s25fl064k";
91		spi-max-frequency = <16000000>;
92		spi-cpol;
93		spi-cpha;
94		reg = <0>;
95	};
96};
97
98&enet0 {
99	tbi-handle = <&tbi0>;
100	phy-handle = <&sgmii_phy2>;
101	phy-connection-type = "sgmii";
102	status = "okay";
103};
104
105&enet1 {
106	tbi-handle = <&tbi1>;
107	phy-handle = <&sgmii_phy0>;
108	phy-connection-type = "sgmii";
109	status = "okay";
110};
111
112&enet2 {
113	phy-handle = <&rgmii_phy1>;
114	phy-connection-type = "rgmii-id";
115	status = "okay";
116};
117
118&i2c0 {
119	status = "okay";
120
121	ina220@40 {
122		compatible = "ti,ina220";
123		reg = <0x40>;
124		shunt-resistor = <1000>;
125	};
126
127	ina220@41 {
128		compatible = "ti,ina220";
129		reg = <0x41>;
130		shunt-resistor = <1000>;
131	};
132
133};
134
135&i2c1 {
136	status = "okay";
137	codec: sgtl5000@a {
138		#sound-dai-cells = <0>;
139		compatible = "fsl,sgtl5000";
140		reg = <0x0a>;
141		VDDA-supply = <&reg_3p3v>;
142		VDDIO-supply = <&reg_3p3v>;
143		clocks = <&sys_mclk>;
144	};
145};
146
147&ifc {
148	#address-cells = <2>;
149	#size-cells = <1>;
150	/* NOR Flash on board */
151	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
152	status = "okay";
153
154	nor@0,0 {
155		#address-cells = <1>;
156		#size-cells = <1>;
157		compatible = "cfi-flash";
158		reg = <0x0 0x0 0x8000000>;
159		big-endian;
160		bank-width = <2>;
161		device-width = <1>;
162	};
163};
164
165&lpuart0 {
166	status = "okay";
167};
168
169&mdio0 {
170	sgmii_phy0: ethernet-phy@0 {
171		reg = <0x0>;
172	};
173	rgmii_phy1: ethernet-phy@1 {
174		reg = <0x1>;
175	};
176	sgmii_phy2: ethernet-phy@2 {
177		reg = <0x2>;
178	};
179	tbi0: tbi-phy@1f {
180		reg = <0x1f>;
181		device_type = "tbi-phy";
182	};
183};
184
185&mdio1 {
186	tbi1: tbi-phy@1f {
187		reg = <0x1f>;
188		device_type = "tbi-phy";
189	};
190};
191
192&esdhc {
193        status = "okay";
194};
195
196&qspi {
197	status = "okay";
198
199	n25q128a130: flash@0 {
200		compatible = "jedec,spi-nor";
201		#address-cells = <1>;
202		#size-cells = <1>;
203		spi-max-frequency = <50000000>;
204		reg = <0>;
205		spi-rx-bus-width = <4>;
206		spi-tx-bus-width = <4>;
207	};
208};
209
210&sai1 {
211	status = "okay";
212};
213
214&sata {
215	status = "okay";
216};
217
218&uart0 {
219	status = "okay";
220};
221
222&uart1 {
223	status = "okay";
224};
225
226&can0 {
227	status = "okay";
228};
229
230&can1 {
231	status = "okay";
232};
233
234&can2 {
235	status = "disabled";
236};
237
238&can3 {
239	status = "disabled";
240};
241