1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (C) 2015 Freescale Semiconductor, Inc. 4 * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/ 5 * 6 */ 7 8/dts-v1/; 9 10#include "imx7d.dtsi" 11#include <dt-bindings/input/linux-event-codes.h> 12 13/ { 14 model = "reMarkable 2.0"; 15 compatible = "remarkable,imx7d-remarkable2", "fsl,imx7d"; 16 17 chosen { 18 stdout-path = &uart6; 19 }; 20 21 memory@80000000 { 22 device_type = "memory"; 23 reg = <0x80000000 0x40000000>; 24 }; 25 26 thermal-zones { 27 epd-thermal { 28 thermal-sensors = <&sy7636a>; 29 polling-delay-passive = <30000>; 30 polling-delay = <30000>; 31 32 trips { 33 trip0 { 34 temperature = <49000>; 35 hysteresis = <2000>; 36 type = "passive"; 37 }; 38 39 trip1 { 40 temperature = <50000>; 41 hysteresis = <2000>; 42 type = "critical"; 43 }; 44 }; 45 }; 46 }; 47 48 reg_brcm: regulator-brcm { 49 compatible = "regulator-fixed"; 50 regulator-name = "brcm_reg"; 51 regulator-min-microvolt = <3300000>; 52 regulator-max-microvolt = <3300000>; 53 pinctrl-names = "default"; 54 pinctrl-0 = <&pinctrl_brcm_reg>; 55 gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>; 56 enable-active-high; 57 startup-delay-us = <150>; 58 }; 59 60 reg_digitizer: regulator-digitizer { 61 compatible = "regulator-fixed"; 62 regulator-name = "VDD_3V3_DIGITIZER"; 63 regulator-min-microvolt = <3300000>; 64 regulator-max-microvolt = <3300000>; 65 pinctrl-names = "default", "sleep"; 66 pinctrl-0 = <&pinctrl_digitizer_reg>; 67 pinctrl-1 = <&pinctrl_digitizer_reg>; 68 gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; 69 enable-active-high; 70 startup-delay-us = <100000>; /* 100 ms */ 71 }; 72 73 reg_touch: regulator-touch { 74 compatible = "regulator-fixed"; 75 regulator-name = "VDD_3V3_TOUCH"; 76 regulator-min-microvolt = <3300000>; 77 regulator-max-microvolt = <3300000>; 78 pinctrl-names = "default"; 79 pinctrl-0 = <&pinctrl_touch_reg>; 80 gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; 81 enable-active-high; 82 }; 83 84 wifi_pwrseq: wifi_pwrseq { 85 compatible = "mmc-pwrseq-simple"; 86 pinctrl-names = "default"; 87 pinctrl-0 = <&pinctrl_wifi>; 88 reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; 89 clocks = <&clks IMX7D_CLKO2_ROOT_DIV>; 90 clock-names = "ext_clock"; 91 }; 92}; 93 94&cpu0 { 95 cpu-supply = <&buck1>; 96}; 97 98&clks { 99 assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, 100 <&clks IMX7D_CLKO2_ROOT_DIV>; 101 assigned-clock-parents = <&clks IMX7D_CKIL>; 102 assigned-clock-rates = <0>, <32768>; 103}; 104 105&i2c1 { 106 clock-frequency = <400000>; 107 pinctrl-names = "default"; 108 pinctrl-0 = <&pinctrl_i2c1>; 109 status = "okay"; 110 111 wacom_digitizer: digitizer@9 { 112 compatible = "hid-over-i2c"; 113 reg = <0x09>; 114 hid-descr-addr = <0x01>; 115 pinctrl-names = "default"; 116 pinctrl-0 = <&pinctrl_wacom>; 117 interrupt-parent = <&gpio1>; 118 interrupts = <1 IRQ_TYPE_LEVEL_LOW>; 119 touchscreen-inverted-x; 120 touchscreen-inverted-y; 121 vdd-supply = <®_digitizer>; 122 }; 123}; 124 125&i2c2 { 126 clock-frequency = <100000>; 127 pinctrl-names = "default"; 128 pinctrl-0 = <&pinctrl_i2c2>; 129 status = "okay"; 130 131 bd71815: pmic@4b { 132 compatible = "rohm,bd71815"; 133 reg = <0x4b>; 134 pinctrl-names = "default"; 135 pinctrl-0 = <&pinctrl_bd71815>; 136 interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */ 137 interrupts = <16 IRQ_TYPE_LEVEL_LOW>; 138 gpio-controller; 139 clocks = <&clks IMX7D_CLKO2_ROOT_SRC>; 140 clock-output-names = "bd71815-32k-out"; 141 #clock-cells = <0>; 142 #gpio-cells = <2>; 143 144 regulators { 145 buck1: buck1 { 146 regulator-name = "buck1"; 147 regulator-min-microvolt = <800000>; 148 regulator-max-microvolt = <2000000>; 149 regulator-boot-on; 150 regulator-always-on; 151 regulator-ramp-delay = <1250>; 152 }; 153 154 buck2: buck2 { 155 regulator-name = "buck2"; 156 regulator-min-microvolt = <800000>; 157 regulator-max-microvolt = <2000000>; 158 regulator-boot-on; 159 regulator-always-on; 160 regulator-ramp-delay = <1250>; 161 }; 162 163 buck3: buck3 { 164 regulator-name = "buck3"; 165 regulator-min-microvolt = <1200000>; 166 regulator-max-microvolt = <2700000>; 167 regulator-boot-on; 168 regulator-always-on; 169 }; 170 171 buck4: buck4 { 172 regulator-name = "buck4"; 173 regulator-min-microvolt = <1100000>; 174 regulator-max-microvolt = <1850000>; 175 regulator-boot-on; 176 regulator-always-on; 177 }; 178 179 buck5: buck5 { 180 regulator-name = "buck5"; 181 regulator-min-microvolt = <1800000>; 182 regulator-max-microvolt = <3300000>; 183 regulator-boot-on; 184 regulator-always-on; 185 }; 186 187 ldo1: ldo1 { 188 regulator-name = "ldo1"; 189 regulator-min-microvolt = <800000>; 190 regulator-max-microvolt = <3300000>; 191 regulator-boot-on; 192 regulator-always-on; 193 }; 194 195 ldo2: ldo2 { 196 regulator-name = "ldo2"; 197 regulator-min-microvolt = <800000>; 198 regulator-max-microvolt = <3300000>; 199 regulator-boot-on; 200 regulator-always-on; 201 }; 202 203 ldo3: ldo3 { 204 regulator-name = "ldo3"; 205 regulator-min-microvolt = <800000>; 206 regulator-max-microvolt = <3300000>; 207 regulator-boot-on; 208 regulator-always-on; 209 }; 210 211 ldo4: ldo4 { 212 regulator-name = "ldo4"; 213 regulator-min-microvolt = <800000>; 214 regulator-max-microvolt = <3300000>; 215 regulator-boot-on; 216 regulator-always-on; 217 }; 218 219 ldo5: ldo5 { 220 regulator-name = "ldo5"; 221 regulator-min-microvolt = <800000>; 222 regulator-max-microvolt = <3300000>; 223 regulator-boot-on; 224 regulator-always-on; 225 }; 226 227 ldo6: ldodvref { 228 regulator-name = "ldodvref"; 229 regulator-boot-on; 230 regulator-always-on; 231 }; 232 233 ldo7: ldolpsr { 234 regulator-name = "ldolpsr"; 235 regulator-boot-on; 236 regulator-always-on; 237 }; 238 239 boost: wled { 240 regulator-name = "wled"; 241 regulator-min-microamp = <10>; 242 regulator-max-microamp = <25000>; 243 regulator-boot-on; 244 regulator-always-on; 245 }; 246 }; 247 }; 248}; 249 250&i2c3 { 251 clock-frequency = <100000>; 252 pinctrl-names = "default"; 253 pinctrl-0 = <&pinctrl_i2c3>; 254 status = "okay"; 255 256 touchscreen@24 { 257 compatible = "cypress,tt21000"; 258 reg = <0x24>; 259 pinctrl-names = "default"; 260 pinctrl-0 = <&pinctrl_touch>; 261 interrupt-parent = <&gpio1>; 262 interrupts = <14 IRQ_TYPE_EDGE_FALLING>; 263 reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; 264 vdd-supply = <®_touch>; 265 touchscreen-size-x = <880>; 266 touchscreen-size-y = <1280>; 267 #address-cells = <1>; 268 #size-cells = <0>; 269 270 button@0 { 271 reg = <0>; 272 linux,keycodes = <KEY_HOMEPAGE>; 273 }; 274 275 button@1 { 276 reg = <1>; 277 linux,keycodes = <KEY_MENU>; 278 }; 279 280 button@2 { 281 reg = <2>; 282 linux,keycodes = <KEY_BACK>; 283 }; 284 285 button@3 { 286 reg = <3>; 287 linux,keycodes = <KEY_SEARCH>; 288 }; 289 290 button@4 { 291 reg = <4>; 292 linux,keycodes = <KEY_VOLUMEDOWN>; 293 }; 294 295 button@5 { 296 reg = <5>; 297 linux,keycodes = <KEY_VOLUMEUP>; 298 }; 299 300 button@6 { 301 reg = <6>; 302 linux,keycodes = <KEY_CAMERA>; 303 }; 304 305 button@7 { 306 reg = <7>; 307 linux,keycodes = <KEY_POWER>; 308 }; 309 }; 310}; 311 312&i2c4 { 313 clock-frequency = <100000>; 314 pinctrl-names = "default", "sleep"; 315 pinctrl-0 = <&pinctrl_i2c4>; 316 pinctrl-1 = <&pinctrl_i2c4>; 317 status = "okay"; 318 319 sy7636a: pmic@62 { 320 compatible = "silergy,sy7636a"; 321 reg = <0x62>; 322 pinctrl-names = "default"; 323 pinctrl-0 = <&pinctrl_epdpmic>; 324 #thermal-sensor-cells = <0>; 325 epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; 326 327 regulators { 328 reg_epdpmic: vcom { 329 regulator-name = "vcom"; 330 regulator-boot-on; 331 }; 332 }; 333 }; 334}; 335 336&snvs_pwrkey { 337 status = "okay"; 338}; 339 340&uart1 { 341 pinctrl-names = "default"; 342 pinctrl-0 = <&pinctrl_uart1>; 343 assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; 344 assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; 345 status = "okay"; 346}; 347 348&uart6 { 349 pinctrl-names = "default"; 350 pinctrl-0 = <&pinctrl_uart6>; 351 assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; 352 assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; 353 status = "okay"; 354}; 355 356&usbotg2 { 357 srp-disable; 358 hnp-disable; 359 status = "okay"; 360}; 361 362&usdhc2 { 363 #address-cells = <1>; 364 #size-cells = <0>; 365 pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; 366 pinctrl-0 = <&pinctrl_usdhc2>; 367 pinctrl-1 = <&pinctrl_usdhc2_100mhz>; 368 pinctrl-2 = <&pinctrl_usdhc2_200mhz>; 369 mmc-pwrseq = <&wifi_pwrseq>; 370 vmmc-supply = <®_brcm>; 371 bus-width = <4>; 372 non-removable; 373 keep-power-in-suspend; 374 cap-power-off-card; 375 status = "okay"; 376 377 brcmf: bcrmf@1 { 378 reg = <1>; 379 compatible = "brcm,bcm4329-fmac"; 380 }; 381}; 382 383&usdhc3 { 384 pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; 385 pinctrl-0 = <&pinctrl_usdhc3>; 386 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 387 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 388 pinctrl-3 = <&pinctrl_usdhc3>; 389 assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; 390 assigned-clock-rates = <400000000>; 391 bus-width = <8>; 392 non-removable; 393 status = "okay"; 394}; 395 396&wdog1 { 397 pinctrl-names = "default"; 398 pinctrl-0 = <&pinctrl_wdog>; 399 fsl,ext-reset-output; 400}; 401 402&iomuxc_lpsr { 403 pinctrl_digitizer_reg: digitizerreggrp { 404 fsl,pins = < 405 /* DIGITIZER_PWR_EN */ 406 MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 407 >; 408 }; 409 410 pinctrl_wacom: wacomgrp { 411 fsl,pins = < 412 /*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x00000014 FWE */ 413 MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x00000074 /* PDCTB */ 414 MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x00000034 /* WACOM INT */ 415 /*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x00000014 WACOM PWR ENABLE */ 416 /*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x00000074 WACOM RESET */ 417 >; 418 }; 419}; 420 421&iomuxc { 422 pinctrl_bd71815: bd71815grp { 423 fsl,pins = < 424 MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x59 425 >; 426 }; 427 428 pinctrl_brcm_reg: brcmreggrp { 429 fsl,pins = < 430 /* WIFI_PWR_EN */ 431 MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14 432 >; 433 }; 434 435 pinctrl_epdpmic: epdpmicgrp { 436 fsl,pins = < 437 MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074 438 MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014 439 >; 440 }; 441 442 pinctrl_touch: touchgrp { 443 fsl,pins = < 444 /* CYTTSP interrupt */ 445 MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54 446 /* CYTTSP reset */ 447 MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04 448 >; 449 }; 450 451 pinctrl_i2c1: i2c1grp { 452 fsl,pins = < 453 MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f 454 MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f 455 >; 456 }; 457 458 pinctrl_i2c2: i2c2grp { 459 fsl,pins = < 460 MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f 461 MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f 462 >; 463 }; 464 465 pinctrl_i2c3: i2c3grp { 466 fsl,pins = < 467 MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f 468 MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f 469 >; 470 }; 471 472 pinctrl_i2c4: i2c4grp { 473 fsl,pins = < 474 MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f 475 MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f 476 >; 477 }; 478 479 pinctrl_touch_reg: touchreggrp { 480 fsl,pins = < 481 /* TOUCH_PWR_EN */ 482 MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14 483 >; 484 }; 485 486 pinctrl_uart1: uart1grp { 487 fsl,pins = < 488 MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 489 MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 490 >; 491 }; 492 493 pinctrl_uart6: uart6grp { 494 fsl,pins = < 495 MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x79 496 MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x79 497 >; 498 }; 499 500 pinctrl_usdhc2: usdhc2grp { 501 fsl,pins = < 502 MX7D_PAD_SD2_CMD__SD2_CMD 0x59 503 MX7D_PAD_SD2_CLK__SD2_CLK 0x19 504 MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 505 MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 506 MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 507 MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 508 >; 509 }; 510 511 pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { 512 fsl,pins = < 513 MX7D_PAD_SD2_CMD__SD2_CMD 0x5a 514 MX7D_PAD_SD2_CLK__SD2_CLK 0x1a 515 MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a 516 MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a 517 MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a 518 MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a 519 >; 520 }; 521 522 pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { 523 fsl,pins = < 524 MX7D_PAD_SD2_CMD__SD2_CMD 0x5b 525 MX7D_PAD_SD2_CLK__SD2_CLK 0x1b 526 MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b 527 MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b 528 MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b 529 MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b 530 >; 531 }; 532 533 pinctrl_usdhc3: usdhc3grp { 534 fsl,pins = < 535 MX7D_PAD_SD3_CMD__SD3_CMD 0x59 536 MX7D_PAD_SD3_CLK__SD3_CLK 0x19 537 MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 538 MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 539 MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 540 MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 541 MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 542 MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 543 MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 544 MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 545 MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 546 >; 547 }; 548 549 pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { 550 fsl,pins = < 551 MX7D_PAD_SD3_CMD__SD3_CMD 0x5a 552 MX7D_PAD_SD3_CLK__SD3_CLK 0x1a 553 MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a 554 MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a 555 MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a 556 MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a 557 MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a 558 MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a 559 MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a 560 MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a 561 MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a 562 >; 563 }; 564 565 pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { 566 fsl,pins = < 567 MX7D_PAD_SD3_CMD__SD3_CMD 0x5b 568 MX7D_PAD_SD3_CLK__SD3_CLK 0x1b 569 MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b 570 MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b 571 MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b 572 MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b 573 MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b 574 MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b 575 MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b 576 MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b 577 MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b 578 >; 579 }; 580 581 pinctrl_wdog: wdoggrp { 582 fsl,pins = < 583 MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x74 584 >; 585 }; 586 587 pinctrl_wifi: wifigrp { 588 fsl,pins = < 589 /* WiFi Reg On */ 590 MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x00000014 591 /* WiFi Sleep 32k */ 592 MX7D_PAD_SD1_WP__CCM_CLKO2 0x00000014 593 >; 594 }; 595}; 596