1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Sascha Hauer, Pengutronix 4 * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> 5 */ 6 7#include <dt-bindings/gpio/gpio.h> 8 9&fec { 10 /delete-property/ interrupts; 11 interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, 12 <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; 13 fsl,err006687-workaround-present; 14}; 15 16&i2c1 { 17 pinctrl-names = "default", "gpio"; 18 pinctrl-0 = <&pinctrl_i2c1>; 19 pinctrl-1 = <&pinctrl_i2c1_recovery>; 20 scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 21 sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 22 clock-frequency = <100000>; 23 status = "okay"; 24 25 pmic: pmic@8 { 26 compatible = "fsl,pfuze100"; 27 reg = <0x08>; 28 }; 29 30 sensor@48 { 31 compatible = "national,lm75"; 32 reg = <0x48>; 33 vs-supply = <®_3p3v>; 34 }; 35 36 eeprom@50 { 37 compatible = "st,24c64", "atmel,24c64"; 38 reg = <0x50>; 39 pagesize = <32>; 40 vcc-supply = <®_3p3v>; 41 }; 42}; 43 44&iomuxc { 45 /* 46 * This pinmuxing is required for the ERR006687 workaround. Board 47 * DTS files that enable the FEC controller with 48 * fsl,err006687-workaround-present must include this group. 49 */ 50 pinctrl_enet_fix: enetfixgrp { 51 fsl,pins = < 52 /* ENET ping patch */ 53 MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 54 >; 55 }; 56}; 57