1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2/* 3 * Copyright (c) 2014 Protonic Holland 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/input.h> 8 9/ { 10 chosen { 11 stdout-path = &uart4; 12 }; 13 14 reg_3v3: regulator-3v3 { 15 compatible = "regulator-fixed"; 16 regulator-name = "3v3"; 17 regulator-min-microvolt = <3300000>; 18 regulator-max-microvolt = <3300000>; 19 }; 20 21 reg_usb_h1_vbus: regulator-h1-vbus { 22 compatible = "regulator-fixed"; 23 regulator-name = "h1-vbus"; 24 regulator-min-microvolt = <5000000>; 25 regulator-max-microvolt = <5000000>; 26 }; 27 28 reg_usb_otg_vbus: regulator-otg-vbus { 29 compatible = "regulator-fixed"; 30 regulator-name = "otg-vbus"; 31 regulator-min-microvolt = <5000000>; 32 regulator-max-microvolt = <5000000>; 33 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 34 enable-active-high; 35 }; 36}; 37 38&can1 { 39 pinctrl-names = "default"; 40 status = "okay"; 41}; 42 43&i2c1 { 44 clock-frequency = <100000>; 45 pinctrl-names = "default"; 46 pinctrl-0 = <&pinctrl_i2c1>; 47 status = "okay"; 48}; 49 50&i2c3 { 51 clock-frequency = <100000>; 52 pinctrl-names = "default"; 53 pinctrl-0 = <&pinctrl_i2c3>; 54 status = "okay"; 55 56 temperature-sensor@70 { 57 compatible = "ti,tmp103"; 58 reg = <0x70>; 59 }; 60}; 61 62&uart4 { 63 pinctrl-names = "default"; 64 pinctrl-0 = <&pinctrl_uart4>; 65 status = "okay"; 66}; 67 68&usbh1 { 69 vbus-supply = <®_usb_h1_vbus>; 70 phy_type = "utmi"; 71 dr_mode = "host"; 72 disable-over-current; 73 status = "okay"; 74}; 75 76&usbotg { 77 vbus-supply = <®_usb_otg_vbus>; 78 pinctrl-names = "default"; 79 pinctrl-0 = <&pinctrl_usbotg>; 80 phy_type = "utmi"; 81 dr_mode = "host"; 82 over-current-active-low; 83 status = "okay"; 84}; 85 86&usbphynop1 { 87 status = "disabled"; 88}; 89 90&usbphynop2 { 91 status = "disabled"; 92}; 93 94&usdhc1 { 95 pinctrl-names = "default"; 96 pinctrl-0 = <&pinctrl_usdhc1>; 97 cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; 98 status = "okay"; 99}; 100 101&usdhc3 { 102 pinctrl-names = "default"; 103 pinctrl-0 = <&pinctrl_usdhc3>; 104 bus-width = <8>; 105 non-removable; 106 no-1-8-v; 107 no-sd; 108 no-sdio; 109 status = "okay"; 110}; 111 112&iomuxc { 113 pinctrl_can1: can1grp { 114 fsl,pins = < 115 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b008 116 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b008 117 >; 118 }; 119 120 pinctrl_i2c1: i2c1grp { 121 fsl,pins = < 122 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 123 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 124 >; 125 }; 126 127 pinctrl_i2c3: i2c3grp { 128 fsl,pins = < 129 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 130 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 131 >; 132 }; 133 134 pinctrl_uart4: uart4grp { 135 fsl,pins = < 136 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 137 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 138 >; 139 }; 140 141 pinctrl_usdhc1: usdhc1grp { 142 fsl,pins = < 143 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 144 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 145 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 146 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 147 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 148 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 149 MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 150 >; 151 }; 152 153 pinctrl_usdhc3: usdhc3grp { 154 fsl,pins = < 155 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 156 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 157 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 158 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 159 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 160 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 161 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 162 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 163 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 164 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 165 MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 166 >; 167 }; 168 169 pinctrl_usbotg: usbotggrp { 170 fsl,pins = < 171 MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 172 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 173 >; 174 }; 175}; 176