xref: /freebsd/sys/contrib/device-tree/src/arm/nxp/imx/imx6qdl-gw551x.dtsi (revision 96190b4fef3b4a0cc3ca0606b0c4e3e69a5e6717)
1/*
2 * Copyright 2014 Gateworks Corporation
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of
12 *     the License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 *     You should have received a copy of the GNU General Public
20 *     License along with this file; if not, write to the Free
21 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 *     MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 *  b) Permission is hereby granted, free of charge, to any person
27 *     obtaining a copy of this software and associated documentation
28 *     files (the "Software"), to deal in the Software without
29 *     restriction, including without limitation the rights to use,
30 *     copy, modify, merge, publish, distribute, sublicense, and/or
31 *     sell copies of the Software, and to permit persons to whom the
32 *     Software is furnished to do so, subject to the following
33 *     conditions:
34 *
35 *     The above copyright notice and this permission notice shall be
36 *     included in all copies or substantial portions of the Software.
37 *
38 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 *     OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/media/tda1997x.h>
50#include <dt-bindings/input/linux-event-codes.h>
51#include <dt-bindings/interrupt-controller/irq.h>
52#include <dt-bindings/sound/fsl-imx-audmux.h>
53
54/ {
55	/* these are used by bootloader for disabling nodes */
56	aliases {
57		led0 = &led0;
58		nand = &gpmi;
59		ssi0 = &ssi1;
60		usb0 = &usbh1;
61		usb1 = &usbotg;
62	};
63
64	chosen {
65		bootargs = "console=ttymxc1,115200";
66	};
67
68	gpio-keys {
69		compatible = "gpio-keys";
70
71		user-pb {
72			label = "user_pb";
73			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
74			linux,code = <BTN_0>;
75		};
76
77		user-pb1x {
78			label = "user_pb1x";
79			linux,code = <BTN_1>;
80			interrupt-parent = <&gsc>;
81			interrupts = <0>;
82		};
83
84		key-erased {
85			label = "key-erased";
86			linux,code = <BTN_2>;
87			interrupt-parent = <&gsc>;
88			interrupts = <1>;
89		};
90
91		eeprom-wp {
92			label = "eeprom_wp";
93			linux,code = <BTN_3>;
94			interrupt-parent = <&gsc>;
95			interrupts = <2>;
96		};
97
98		tamper {
99			label = "tamper";
100			linux,code = <BTN_4>;
101			interrupt-parent = <&gsc>;
102			interrupts = <5>;
103		};
104
105		switch-hold {
106			label = "switch_hold";
107			linux,code = <BTN_5>;
108			interrupt-parent = <&gsc>;
109			interrupts = <7>;
110		};
111	};
112
113	leds {
114		compatible = "gpio-leds";
115		pinctrl-names = "default";
116		pinctrl-0 = <&pinctrl_gpio_leds>;
117
118		led0: led-user1 {
119			label = "user1";
120			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
121			default-state = "on";
122			linux,default-trigger = "heartbeat";
123		};
124	};
125
126	memory@10000000 {
127		device_type = "memory";
128		reg = <0x10000000 0x20000000>;
129	};
130
131	reg_5p0v: regulator-5p0v {
132		compatible = "regulator-fixed";
133		regulator-name = "5P0V";
134		regulator-min-microvolt = <5000000>;
135		regulator-max-microvolt = <5000000>;
136	};
137
138	reg_usb_h1_vbus: regulator-usb-h1-vbus {
139		compatible = "regulator-fixed";
140		regulator-name = "usb_h1_vbus";
141		regulator-min-microvolt = <5000000>;
142		regulator-max-microvolt = <5000000>;
143	};
144
145	reg_usb_otg_vbus: regulator-usb-otg-vbus {
146		compatible = "regulator-fixed";
147		regulator-name = "usb_otg_vbus";
148		regulator-min-microvolt = <5000000>;
149		regulator-max-microvolt = <5000000>;
150	};
151
152	sound-digital {
153		compatible = "simple-audio-card";
154		simple-audio-card,name = "tda1997x-audio";
155		simple-audio-card,format = "i2s";
156		simple-audio-card,bitclock-master = <&sound_codec>;
157		simple-audio-card,frame-master = <&sound_codec>;
158
159		sound_cpu: simple-audio-card,cpu {
160			sound-dai = <&ssi1>;
161		};
162
163		sound_codec: simple-audio-card,codec {
164			sound-dai = <&hdmi_receiver>;
165		};
166	};
167};
168
169&audmux {
170	pinctrl-names = "default";
171	pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */
172	status = "okay";
173
174	mux-ssi1 {
175		fsl,audmux-port = <0>;
176		fsl,port-config = <
177			(IMX_AUDMUX_V2_PTCR_TFSDIR |
178			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
179			IMX_AUDMUX_V2_PTCR_TCLKDIR |
180			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
181			IMX_AUDMUX_V2_PTCR_SYN)
182			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
183		>;
184	};
185
186	mux-aud5 {
187		fsl,audmux-port = <4>;
188		fsl,port-config = <
189			IMX_AUDMUX_V2_PTCR_SYN
190			IMX_AUDMUX_V2_PDCR_RXDSEL(0)>;
191	};
192};
193
194&can1 {
195	pinctrl-names = "default";
196	pinctrl-0 = <&pinctrl_flexcan1>;
197	status = "okay";
198};
199
200&gpmi {
201	pinctrl-names = "default";
202	pinctrl-0 = <&pinctrl_gpmi_nand>;
203	status = "okay";
204};
205
206&hdmi {
207	ddc-i2c-bus = <&i2c3>;
208	status = "okay";
209};
210
211&i2c1 {
212	clock-frequency = <100000>;
213	pinctrl-names = "default";
214	pinctrl-0 = <&pinctrl_i2c1>;
215	status = "okay";
216
217	gsc: gsc@20 {
218		compatible = "gw,gsc";
219		reg = <0x20>;
220		interrupt-parent = <&gpio1>;
221		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
222		interrupt-controller;
223		#interrupt-cells = <1>;
224		#size-cells = <0>;
225
226		adc {
227			compatible = "gw,gsc-adc";
228			#address-cells = <1>;
229			#size-cells = <0>;
230
231			channel@0 {
232				gw,mode = <0>;
233				reg = <0x00>;
234				label = "temp";
235			};
236
237			channel@2 {
238				gw,mode = <1>;
239				reg = <0x02>;
240				label = "vdd_vin";
241			};
242
243			channel@5 {
244				gw,mode = <1>;
245				reg = <0x05>;
246				label = "vdd_3p3";
247			};
248
249			channel@8 {
250				gw,mode = <1>;
251				reg = <0x08>;
252				label = "vdd_bat";
253			};
254
255			channel@b {
256				gw,mode = <1>;
257				reg = <0x0b>;
258				label = "vdd_5p0";
259			};
260
261			channel@e {
262				gw,mode = <1>;
263				reg = <0xe>;
264				label = "vdd_arm";
265			};
266
267			channel@11 {
268				gw,mode = <1>;
269				reg = <0x11>;
270				label = "vdd_soc";
271			};
272
273			channel@14 {
274				gw,mode = <1>;
275				reg = <0x14>;
276				label = "vdd_3p0";
277			};
278
279			channel@17 {
280				gw,mode = <1>;
281				reg = <0x17>;
282				label = "vdd_1p5";
283			};
284
285			channel@1d {
286				gw,mode = <1>;
287				reg = <0x1d>;
288				label = "vdd_1p8a";
289			};
290
291			channel@20 {
292				gw,mode = <1>;
293				reg = <0x20>;
294				label = "vdd_1p0b";
295			};
296		};
297	};
298
299	gsc_gpio: gpio@23 {
300		compatible = "nxp,pca9555";
301		reg = <0x23>;
302		gpio-controller;
303		#gpio-cells = <2>;
304		interrupt-parent = <&gsc>;
305		interrupts = <4>;
306	};
307
308	eeprom1: eeprom@50 {
309		compatible = "atmel,24c02";
310		reg = <0x50>;
311		pagesize = <16>;
312	};
313
314	eeprom2: eeprom@51 {
315		compatible = "atmel,24c02";
316		reg = <0x51>;
317		pagesize = <16>;
318	};
319
320	eeprom3: eeprom@52 {
321		compatible = "atmel,24c02";
322		reg = <0x52>;
323		pagesize = <16>;
324	};
325
326	eeprom4: eeprom@53 {
327		compatible = "atmel,24c02";
328		reg = <0x53>;
329		pagesize = <16>;
330	};
331
332	rtc: ds1672@68 {
333		compatible = "dallas,ds1672";
334		reg = <0x68>;
335	};
336};
337
338&i2c2 {
339	clock-frequency = <100000>;
340	pinctrl-names = "default";
341	pinctrl-0 = <&pinctrl_i2c2>;
342	status = "okay";
343
344	ltc3676: pmic@3c {
345		compatible = "lltc,ltc3676";
346		reg = <0x3c>;
347		pinctrl-names = "default";
348		pinctrl-0 = <&pinctrl_pmic>;
349		interrupt-parent = <&gpio1>;
350		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
351
352		regulators {
353			/* VDD_SOC (1+R1/R2 = 1.635) */
354			reg_vdd_soc: sw1 {
355				regulator-name = "vddsoc";
356				regulator-min-microvolt = <674400>;
357				regulator-max-microvolt = <1308000>;
358				lltc,fb-voltage-divider = <127000 200000>;
359				regulator-ramp-delay = <7000>;
360				regulator-boot-on;
361				regulator-always-on;
362			};
363
364			/* VDD_DDR (1+R1/R2 = 2.105) */
365			reg_vdd_ddr: sw2 {
366				regulator-name = "vddddr";
367				regulator-min-microvolt = <868310>;
368				regulator-max-microvolt = <1684000>;
369				lltc,fb-voltage-divider = <221000 200000>;
370				regulator-ramp-delay = <7000>;
371				regulator-boot-on;
372				regulator-always-on;
373			};
374
375			/* VDD_ARM (1+R1/R2 = 1.635) */
376			reg_vdd_arm: sw3 {
377				regulator-name = "vddarm";
378				regulator-min-microvolt = <674400>;
379				regulator-max-microvolt = <1308000>;
380				lltc,fb-voltage-divider = <127000 200000>;
381				regulator-ramp-delay = <7000>;
382				regulator-boot-on;
383				regulator-always-on;
384			};
385
386			/* VDD_3P3 (1+R1/R2 = 1.281) */
387			reg_3p3: sw4 {
388				regulator-name = "vdd3p3";
389				regulator-min-microvolt = <1880000>;
390				regulator-max-microvolt = <3647000>;
391				lltc,fb-voltage-divider = <200000 56200>;
392				regulator-ramp-delay = <7000>;
393				regulator-boot-on;
394				regulator-always-on;
395			};
396
397			/* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */
398			reg_1p8a: ldo2 {
399				regulator-name = "vdd1p8a";
400				regulator-min-microvolt = <1816125>;
401				regulator-max-microvolt = <1816125>;
402				lltc,fb-voltage-divider = <301000 200000>;
403				regulator-boot-on;
404				regulator-always-on;
405			};
406
407			/* VDD_1P8b: HDMI In analog */
408			reg_1p8b: ldo3 {
409				regulator-name = "vdd1p8b";
410				regulator-min-microvolt = <1800000>;
411				regulator-max-microvolt = <1800000>;
412				regulator-boot-on;
413			};
414
415			/* VDD_HIGH (1+R1/R2 = 4.17) */
416			reg_3p0: ldo4 {
417				regulator-name = "vdd3p0";
418				regulator-min-microvolt = <3023250>;
419				regulator-max-microvolt = <3023250>;
420				lltc,fb-voltage-divider = <634000 200000>;
421				regulator-boot-on;
422				regulator-always-on;
423			};
424		};
425	};
426};
427
428&i2c3 {
429	clock-frequency = <100000>;
430	pinctrl-names = "default";
431	pinctrl-0 = <&pinctrl_i2c3>;
432	status = "okay";
433
434	gpio_exp: pca9555@24 {
435		compatible = "nxp,pca9555";
436		reg = <0x24>;
437		gpio-controller;
438		#gpio-cells = <2>;
439	};
440
441	hdmi_receiver: hdmi-receiver@48 {
442		compatible = "nxp,tda19971";
443		pinctrl-names = "default";
444		pinctrl-0 = <&pinctrl_tda1997x>;
445		reg = <0x48>;
446		interrupt-parent = <&gpio1>;
447		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
448		DOVDD-supply = <&reg_3p3>;
449		AVDD-supply = <&reg_1p8b>;
450		DVDD-supply = <&reg_1p8a>;
451		#sound-dai-cells = <0>;
452		nxp,audout-format = "i2s";
453		nxp,audout-layout = <0>;
454		nxp,audout-width = <16>;
455		nxp,audout-mclk-fs = <128>;
456		/*
457		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
458		 * and Y[11:4] across 16bits in the same cycle
459		 * which we map to VP[15:08]<->CSI_DATA[19:12]
460		 */
461		nxp,vidout-portcfg =
462			/*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
463			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
464			/*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
465			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
466			/*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
467			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
468			/*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
469			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
470
471		port {
472			tda1997x_to_ipu1_csi0_mux: endpoint {
473				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
474				bus-width = <16>;
475				hsync-active = <1>;
476				vsync-active = <1>;
477				data-active = <1>;
478			};
479		};
480	};
481};
482
483&ipu1_csi0_from_ipu1_csi0_mux {
484	bus-width = <16>;
485};
486
487&ipu1_csi0_mux_from_parallel_sensor {
488	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
489	bus-width = <16>;
490};
491
492&ipu1_csi0 {
493	pinctrl-names = "default";
494	pinctrl-0 = <&pinctrl_ipu1_csi0>;
495};
496
497&pcie {
498	pinctrl-names = "default";
499	pinctrl-0 = <&pinctrl_pcie>;
500	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
501	status = "okay";
502};
503
504&pwm2 {
505	pinctrl-names = "default";
506	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
507	status = "disabled";
508};
509
510&pwm3 {
511	pinctrl-names = "default";
512	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
513	status = "disabled";
514};
515
516&ssi1 {
517	status = "okay";
518};
519
520&uart2 {
521	pinctrl-names = "default";
522	pinctrl-0 = <&pinctrl_uart2>;
523	status = "okay";
524};
525
526&uart3 {
527	pinctrl-names = "default";
528	pinctrl-0 = <&pinctrl_uart3>;
529	status = "okay";
530};
531
532&usbotg {
533	vbus-supply = <&reg_usb_otg_vbus>;
534	pinctrl-names = "default";
535	pinctrl-0 = <&pinctrl_usbotg>;
536	disable-over-current;
537	status = "okay";
538};
539
540&usbh1 {
541	vbus-supply = <&reg_usb_h1_vbus>;
542	status = "okay";
543};
544
545&wdog1 {
546	pinctrl-names = "default";
547	pinctrl-0 = <&pinctrl_wdog>;
548	fsl,ext-reset-output;
549};
550
551&iomuxc {
552	pinctrl_audmux: audmuxgrp {
553		fsl,pins = <
554			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
555			MX6QDL_PAD_DISP0_DAT14__AUD5_RXC	0x130b0
556			MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS	0x130b0
557		>;
558	};
559
560	pinctrl_flexcan1: flexcan1grp {
561		fsl,pins = <
562			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
563			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
564			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
565		>;
566	};
567
568	pinctrl_gpio_leds: gpioledsgrp {
569		fsl,pins = <
570			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
571		>;
572	};
573
574	pinctrl_gpmi_nand: gpminandgrp {
575		fsl,pins = <
576			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
577			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
578			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
579			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
580			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
581			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
582			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
583			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
584			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
585			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
586			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
587			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
588			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
589			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
590			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
591		>;
592	};
593
594	pinctrl_i2c1: i2c1grp {
595		fsl,pins = <
596			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
597			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
598			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
599		>;
600	};
601
602	pinctrl_i2c2: i2c2grp {
603		fsl,pins = <
604			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
605			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
606		>;
607	};
608
609	pinctrl_i2c3: i2c3grp {
610		fsl,pins = <
611			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
612			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
613		>;
614	};
615
616	pinctrl_ipu1_csi0: ipu1_csi0grp {
617		fsl,pins = <
618			MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04		0x1b0b0
619			MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05		0x1b0b0
620			MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06		0x1b0b0
621			MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07		0x1b0b0
622			MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08		0x1b0b0
623			MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09		0x1b0b0
624			MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10		0x1b0b0
625			MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11		0x1b0b0
626			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
627			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
628			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
629			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
630			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
631			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
632			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
633			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
634			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
635			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
636			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
637		>;
638	};
639
640	pinctrl_pcie: pciegrp {
641		fsl,pins = <
642			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* PCIE RST */
643		>;
644	};
645
646	pinctrl_pmic: pmicgrp {
647		fsl,pins = <
648			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
649		>;
650	};
651
652	pinctrl_pwm2: pwm2grp {
653		fsl,pins = <
654			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
655		>;
656	};
657
658	pinctrl_pwm3: pwm3grp {
659		fsl,pins = <
660			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
661		>;
662	};
663
664	pinctrl_tda1997x: tda1997xgrp {
665		fsl,pins = <
666			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
667		>;
668	};
669
670	pinctrl_uart2: uart2grp {
671		fsl,pins = <
672			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
673			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
674		>;
675	};
676
677	pinctrl_uart3: uart3grp {
678		fsl,pins = <
679			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
680			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
681		>;
682	};
683
684	pinctrl_usbotg: usbotggrp {
685		fsl,pins = <
686			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
687		>;
688	};
689
690	pinctrl_wdog: wdoggrp {
691		fsl,pins = <
692			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
693		>;
694	};
695};
696