1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Gateworks Corporation 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/linux-event-codes.h> 8#include <dt-bindings/interrupt-controller/irq.h> 9 10/ { 11 /* these are used by bootloader for disabling nodes */ 12 aliases { 13 led0 = &led0; 14 led1 = &led1; 15 led2 = &led2; 16 nand = &gpmi; 17 ssi0 = &ssi1; 18 usb0 = &usbh1; 19 usb1 = &usbotg; 20 }; 21 22 chosen { 23 bootargs = "console=ttymxc1,115200"; 24 }; 25 26 backlight { 27 compatible = "pwm-backlight"; 28 pwms = <&pwm4 0 5000000>; 29 brightness-levels = <0 4 8 16 32 64 128 255>; 30 default-brightness-level = <7>; 31 }; 32 33 gpio-keys { 34 compatible = "gpio-keys"; 35 36 user-pb { 37 label = "user_pb"; 38 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; 39 linux,code = <BTN_0>; 40 }; 41 42 user-pb1x { 43 label = "user_pb1x"; 44 linux,code = <BTN_1>; 45 interrupt-parent = <&gsc>; 46 interrupts = <0>; 47 }; 48 49 key-erased { 50 label = "key-erased"; 51 linux,code = <BTN_2>; 52 interrupt-parent = <&gsc>; 53 interrupts = <1>; 54 }; 55 56 eeprom-wp { 57 label = "eeprom_wp"; 58 linux,code = <BTN_3>; 59 interrupt-parent = <&gsc>; 60 interrupts = <2>; 61 }; 62 63 tamper { 64 label = "tamper"; 65 linux,code = <BTN_4>; 66 interrupt-parent = <&gsc>; 67 interrupts = <5>; 68 }; 69 70 switch-hold { 71 label = "switch_hold"; 72 linux,code = <BTN_5>; 73 interrupt-parent = <&gsc>; 74 interrupts = <7>; 75 }; 76 }; 77 78 leds { 79 compatible = "gpio-leds"; 80 pinctrl-names = "default"; 81 pinctrl-0 = <&pinctrl_gpio_leds>; 82 83 led0: led-user1 { 84 label = "user1"; 85 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ 86 default-state = "on"; 87 linux,default-trigger = "heartbeat"; 88 }; 89 90 led1: led-user2 { 91 label = "user2"; 92 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ 93 default-state = "off"; 94 }; 95 96 led2: led-user3 { 97 label = "user3"; 98 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ 99 default-state = "off"; 100 }; 101 }; 102 103 memory@10000000 { 104 device_type = "memory"; 105 reg = <0x10000000 0x20000000>; 106 }; 107 108 pps { 109 compatible = "pps-gpio"; 110 pinctrl-names = "default"; 111 pinctrl-0 = <&pinctrl_pps>; 112 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; 113 status = "okay"; 114 }; 115 116 reg_1p0v: regulator-1p0v { 117 compatible = "regulator-fixed"; 118 regulator-name = "1P0V"; 119 regulator-min-microvolt = <1000000>; 120 regulator-max-microvolt = <1000000>; 121 regulator-always-on; 122 }; 123 124 reg_3p3v: regulator-3p3v { 125 compatible = "regulator-fixed"; 126 regulator-name = "3P3V"; 127 regulator-min-microvolt = <3300000>; 128 regulator-max-microvolt = <3300000>; 129 regulator-always-on; 130 }; 131 132 reg_5p0v: regulator-5p0v { 133 compatible = "regulator-fixed"; 134 regulator-name = "5P0V"; 135 regulator-min-microvolt = <5000000>; 136 regulator-max-microvolt = <5000000>; 137 regulator-always-on; 138 }; 139 140 reg_can1_stby: regulator-can1-stby { 141 compatible = "regulator-fixed"; 142 pinctrl-names = "default"; 143 pinctrl-0 = <&pinctrl_reg_can1>; 144 regulator-name = "can1_stby"; 145 gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; 146 regulator-min-microvolt = <3300000>; 147 regulator-max-microvolt = <3300000>; 148 }; 149 150 reg_usb_otg_vbus: regulator-usb-otg-vbus { 151 compatible = "regulator-fixed"; 152 regulator-name = "usb_otg_vbus"; 153 regulator-min-microvolt = <5000000>; 154 regulator-max-microvolt = <5000000>; 155 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 156 enable-active-high; 157 }; 158 159 sound { 160 compatible = "fsl,imx6q-ventana-sgtl5000", 161 "fsl,imx-audio-sgtl5000"; 162 model = "sgtl5000-audio"; 163 ssi-controller = <&ssi1>; 164 audio-codec = <&codec>; 165 audio-routing = 166 "MIC_IN", "Mic Jack", 167 "Mic Jack", "Mic Bias", 168 "Headphone Jack", "HP_OUT"; 169 mux-int-port = <1>; 170 mux-ext-port = <4>; 171 }; 172}; 173 174&audmux { 175 pinctrl-names = "default"; 176 pinctrl-0 = <&pinctrl_audmux>; 177 status = "okay"; 178}; 179 180&can1 { 181 pinctrl-names = "default"; 182 pinctrl-0 = <&pinctrl_flexcan1>; 183 xceiver-supply = <®_can1_stby>; 184 status = "okay"; 185}; 186 187&clks { 188 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, 189 <&clks IMX6QDL_CLK_LDB_DI1_SEL>; 190 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, 191 <&clks IMX6QDL_CLK_PLL3_USB_OTG>; 192}; 193 194&ecspi3 { 195 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; 196 pinctrl-names = "default"; 197 pinctrl-0 = <&pinctrl_ecspi3>; 198 status = "okay"; 199}; 200 201&fec { 202 pinctrl-names = "default"; 203 pinctrl-0 = <&pinctrl_enet>; 204 phy-mode = "rgmii-id"; 205 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; 206 status = "okay"; 207}; 208 209&gpmi { 210 pinctrl-names = "default"; 211 pinctrl-0 = <&pinctrl_gpmi_nand>; 212 status = "okay"; 213}; 214 215&hdmi { 216 ddc-i2c-bus = <&i2c3>; 217 status = "okay"; 218}; 219 220&i2c1 { 221 clock-frequency = <100000>; 222 pinctrl-names = "default"; 223 pinctrl-0 = <&pinctrl_i2c1>; 224 status = "okay"; 225 226 gsc: gsc@20 { 227 compatible = "gw,gsc"; 228 reg = <0x20>; 229 interrupt-parent = <&gpio1>; 230 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 231 interrupt-controller; 232 #interrupt-cells = <1>; 233 #size-cells = <0>; 234 235 adc { 236 compatible = "gw,gsc-adc"; 237 #address-cells = <1>; 238 #size-cells = <0>; 239 240 channel@0 { 241 gw,mode = <0>; 242 reg = <0x00>; 243 label = "temp"; 244 }; 245 246 channel@2 { 247 gw,mode = <1>; 248 reg = <0x02>; 249 label = "vdd_vin"; 250 }; 251 252 channel@5 { 253 gw,mode = <1>; 254 reg = <0x05>; 255 label = "vdd_3p3"; 256 }; 257 258 channel@8 { 259 gw,mode = <1>; 260 reg = <0x08>; 261 label = "vdd_bat"; 262 }; 263 264 channel@b { 265 gw,mode = <1>; 266 reg = <0x0b>; 267 label = "vdd_5p0"; 268 }; 269 270 channel@e { 271 gw,mode = <1>; 272 reg = <0xe>; 273 label = "vdd_arm"; 274 }; 275 276 channel@11 { 277 gw,mode = <1>; 278 reg = <0x11>; 279 label = "vdd_soc"; 280 }; 281 282 channel@14 { 283 gw,mode = <1>; 284 reg = <0x14>; 285 label = "vdd_3p0"; 286 }; 287 288 channel@17 { 289 gw,mode = <1>; 290 reg = <0x17>; 291 label = "vdd_1p5"; 292 }; 293 294 channel@1d { 295 gw,mode = <1>; 296 reg = <0x1d>; 297 label = "vdd_1p8"; 298 }; 299 300 channel@20 { 301 gw,mode = <1>; 302 reg = <0x20>; 303 label = "vdd_1p0"; 304 }; 305 306 channel@23 { 307 gw,mode = <1>; 308 reg = <0x23>; 309 label = "vdd_2p5"; 310 }; 311 312 channel@29 { 313 gw,mode = <1>; 314 reg = <0x29>; 315 label = "vdd_an1"; 316 }; 317 }; 318 }; 319 320 gsc_gpio: gpio@23 { 321 compatible = "nxp,pca9555"; 322 reg = <0x23>; 323 gpio-controller; 324 #gpio-cells = <2>; 325 interrupt-parent = <&gsc>; 326 interrupts = <4>; 327 }; 328 329 eeprom1: eeprom@50 { 330 compatible = "atmel,24c02"; 331 reg = <0x50>; 332 pagesize = <16>; 333 }; 334 335 eeprom2: eeprom@51 { 336 compatible = "atmel,24c02"; 337 reg = <0x51>; 338 pagesize = <16>; 339 }; 340 341 eeprom3: eeprom@52 { 342 compatible = "atmel,24c02"; 343 reg = <0x52>; 344 pagesize = <16>; 345 }; 346 347 eeprom4: eeprom@53 { 348 compatible = "atmel,24c02"; 349 reg = <0x53>; 350 pagesize = <16>; 351 }; 352 353 rtc: ds1672@68 { 354 compatible = "dallas,ds1672"; 355 reg = <0x68>; 356 }; 357}; 358 359&i2c2 { 360 clock-frequency = <100000>; 361 pinctrl-names = "default"; 362 pinctrl-0 = <&pinctrl_i2c2>; 363 status = "okay"; 364 365 ltc3676: pmic@3c { 366 compatible = "lltc,ltc3676"; 367 reg = <0x3c>; 368 pinctrl-names = "default"; 369 pinctrl-0 = <&pinctrl_pmic>; 370 interrupt-parent = <&gpio1>; 371 interrupts = <8 IRQ_TYPE_EDGE_FALLING>; 372 373 regulators { 374 /* VDD_SOC (1+R1/R2 = 1.635) */ 375 reg_vdd_soc: sw1 { 376 regulator-name = "vddsoc"; 377 regulator-min-microvolt = <674400>; 378 regulator-max-microvolt = <1308000>; 379 lltc,fb-voltage-divider = <127000 200000>; 380 regulator-ramp-delay = <7000>; 381 regulator-boot-on; 382 regulator-always-on; 383 }; 384 385 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ 386 reg_1p8v: sw2 { 387 regulator-name = "vdd1p8"; 388 regulator-min-microvolt = <1033310>; 389 regulator-max-microvolt = <2004000>; 390 lltc,fb-voltage-divider = <301000 200000>; 391 regulator-ramp-delay = <7000>; 392 regulator-boot-on; 393 regulator-always-on; 394 }; 395 396 /* VDD_ARM (1+R1/R2 = 1.635) */ 397 reg_vdd_arm: sw3 { 398 regulator-name = "vddarm"; 399 regulator-min-microvolt = <674400>; 400 regulator-max-microvolt = <1308000>; 401 lltc,fb-voltage-divider = <127000 200000>; 402 regulator-ramp-delay = <7000>; 403 regulator-boot-on; 404 regulator-always-on; 405 }; 406 407 /* VDD_DDR (1+R1/R2 = 2.105) */ 408 reg_vdd_ddr: sw4 { 409 regulator-name = "vddddr"; 410 regulator-min-microvolt = <868310>; 411 regulator-max-microvolt = <1684000>; 412 lltc,fb-voltage-divider = <221000 200000>; 413 regulator-ramp-delay = <7000>; 414 regulator-boot-on; 415 regulator-always-on; 416 }; 417 418 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ 419 reg_2p5v: ldo2 { 420 regulator-name = "vdd2p5"; 421 regulator-min-microvolt = <2490375>; 422 regulator-max-microvolt = <2490375>; 423 lltc,fb-voltage-divider = <487000 200000>; 424 regulator-boot-on; 425 regulator-always-on; 426 }; 427 428 /* VDD_AUD_1P8: Audio codec */ 429 reg_aud_1p8v: ldo3 { 430 regulator-name = "vdd1p8a"; 431 regulator-min-microvolt = <1800000>; 432 regulator-max-microvolt = <1800000>; 433 regulator-boot-on; 434 }; 435 436 /* VDD_HIGH (1+R1/R2 = 4.17) */ 437 reg_3p0v: ldo4 { 438 regulator-name = "vdd3p0"; 439 regulator-min-microvolt = <3023250>; 440 regulator-max-microvolt = <3023250>; 441 lltc,fb-voltage-divider = <634000 200000>; 442 regulator-boot-on; 443 regulator-always-on; 444 }; 445 }; 446 }; 447}; 448 449&i2c3 { 450 clock-frequency = <100000>; 451 pinctrl-names = "default"; 452 pinctrl-0 = <&pinctrl_i2c3>; 453 status = "okay"; 454 455 codec: sgtl5000@a { 456 compatible = "fsl,sgtl5000"; 457 reg = <0x0a>; 458 #sound-dai-cells = <0>; 459 clocks = <&clks IMX6QDL_CLK_CKO>; 460 VDDA-supply = <®_1p8v>; 461 VDDIO-supply = <®_3p3v>; 462 }; 463 464 touchscreen: egalax_ts@4 { 465 compatible = "eeti,egalax_ts"; 466 reg = <0x04>; 467 interrupt-parent = <&gpio7>; 468 interrupts = <12 2>; 469 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; 470 }; 471 472 accel@1e { 473 compatible = "nxp,fxos8700"; 474 reg = <0x1e>; 475 }; 476}; 477 478&ldb { 479 status = "okay"; 480 481 lvds-channel@0 { 482 fsl,data-mapping = "spwg"; 483 fsl,data-width = <18>; 484 status = "okay"; 485 486 display-timings { 487 native-mode = <&timing0>; 488 timing0: hsd100pxn1 { 489 clock-frequency = <65000000>; 490 hactive = <1024>; 491 vactive = <768>; 492 hback-porch = <220>; 493 hfront-porch = <40>; 494 vback-porch = <21>; 495 vfront-porch = <7>; 496 hsync-len = <60>; 497 vsync-len = <10>; 498 }; 499 }; 500 }; 501}; 502 503&pcie { 504 pinctrl-names = "default"; 505 pinctrl-0 = <&pinctrl_pcie>; 506 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; 507 status = "okay"; 508}; 509 510&pwm2 { 511 pinctrl-names = "default"; 512 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ 513 status = "disabled"; 514}; 515 516&pwm3 { 517 pinctrl-names = "default"; 518 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ 519 status = "disabled"; 520}; 521 522&pwm4 { 523 #pwm-cells = <2>; 524 pinctrl-names = "default"; 525 pinctrl-0 = <&pinctrl_pwm4>; 526 status = "okay"; 527}; 528 529&ssi1 { 530 status = "okay"; 531}; 532 533&uart1 { 534 pinctrl-names = "default"; 535 pinctrl-0 = <&pinctrl_uart1>; 536 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 537 status = "okay"; 538}; 539 540&uart2 { 541 pinctrl-names = "default"; 542 pinctrl-0 = <&pinctrl_uart2>; 543 status = "okay"; 544}; 545 546&uart5 { 547 pinctrl-names = "default"; 548 pinctrl-0 = <&pinctrl_uart5>; 549 status = "okay"; 550}; 551 552&usbotg { 553 vbus-supply = <®_usb_otg_vbus>; 554 pinctrl-names = "default"; 555 pinctrl-0 = <&pinctrl_usbotg>; 556 disable-over-current; 557 status = "okay"; 558}; 559 560&usbh1 { 561 status = "okay"; 562}; 563 564&usdhc3 { 565 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 566 pinctrl-0 = <&pinctrl_usdhc3>; 567 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 568 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 569 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 570 vmmc-supply = <®_3p3v>; 571 no-1-8-v; /* firmware will remove if board revision supports */ 572 status = "okay"; 573}; 574 575&wdog1 { 576 pinctrl-names = "default"; 577 pinctrl-0 = <&pinctrl_wdog>; 578 fsl,ext-reset-output; 579}; 580 581&iomuxc { 582 pinctrl_audmux: audmuxgrp { 583 fsl,pins = < 584 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 585 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 586 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 587 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 588 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ 589 >; 590 }; 591 592 pinctrl_ecspi3: escpi3grp { 593 fsl,pins = < 594 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 595 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 596 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 597 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 598 >; 599 }; 600 601 pinctrl_enet: enetgrp { 602 fsl,pins = < 603 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 604 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 605 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 606 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 607 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 608 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 609 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 610 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 611 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 612 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 613 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 614 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 615 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 616 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 617 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 618 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 619 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ 620 >; 621 }; 622 623 pinctrl_flexcan1: flexcan1grp { 624 fsl,pins = < 625 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 626 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 627 >; 628 }; 629 630 pinctrl_gpio_leds: gpioledsgrp { 631 fsl,pins = < 632 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 633 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 634 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 635 >; 636 }; 637 638 pinctrl_gpmi_nand: gpminandgrp { 639 fsl,pins = < 640 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 641 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 642 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 643 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 644 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 645 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 646 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 647 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 648 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 649 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 650 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 651 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 652 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 653 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 654 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 655 >; 656 }; 657 658 pinctrl_i2c1: i2c1grp { 659 fsl,pins = < 660 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 661 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 662 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 663 >; 664 }; 665 666 pinctrl_i2c2: i2c2grp { 667 fsl,pins = < 668 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 669 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 670 >; 671 }; 672 673 pinctrl_i2c3: i2c3grp { 674 fsl,pins = < 675 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 676 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 677 >; 678 }; 679 680 pinctrl_pcie: pciegrp { 681 fsl,pins = < 682 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */ 683 >; 684 }; 685 686 pinctrl_pmic: pmicgrp { 687 fsl,pins = < 688 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ 689 >; 690 }; 691 692 pinctrl_pps: ppsgrp { 693 fsl,pins = < 694 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 695 >; 696 }; 697 698 pinctrl_pwm2: pwm2grp { 699 fsl,pins = < 700 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 701 >; 702 }; 703 704 pinctrl_pwm3: pwm3grp { 705 fsl,pins = < 706 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 707 >; 708 }; 709 710 pinctrl_pwm4: pwm4grp { 711 fsl,pins = < 712 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 713 >; 714 }; 715 716 pinctrl_reg_can1: regcan1grp { 717 fsl,pins = < 718 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ 719 >; 720 }; 721 722 pinctrl_uart1: uart1grp { 723 fsl,pins = < 724 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 725 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 726 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ 727 >; 728 }; 729 730 pinctrl_uart2: uart2grp { 731 fsl,pins = < 732 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 733 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 734 >; 735 }; 736 737 pinctrl_uart5: uart5grp { 738 fsl,pins = < 739 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 740 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 741 >; 742 }; 743 744 pinctrl_usbotg: usbotggrp { 745 fsl,pins = < 746 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 747 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ 748 MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x17059 749 >; 750 }; 751 752 pinctrl_usdhc3: usdhc3grp { 753 fsl,pins = < 754 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 755 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 756 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 757 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 758 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 759 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 760 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ 761 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 762 >; 763 }; 764 765 pinctrl_usdhc3_100mhz: usdhc3grp100mhz { 766 fsl,pins = < 767 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 768 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 769 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 770 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 771 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 772 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 773 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ 774 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 775 >; 776 }; 777 778 pinctrl_usdhc3_200mhz: usdhc3grp200mhz { 779 fsl,pins = < 780 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 781 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 782 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 783 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 784 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 785 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 786 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ 787 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 788 >; 789 }; 790 791 pinctrl_wdog: wdoggrp { 792 fsl,pins = < 793 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 794 >; 795 }; 796}; 797